Handling Of Transducer And Water Temperature Sensor; Tft Lcd Panel - Honda HE-670 Operation Manual

1-3. HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR

WARNING
Work on the board is too unstable and risky.
Installation and maintenance of transducer and water temperature sensor
should be done after you land and fix the boat.
Unless you keep it, human damage resulting in death or serious wound will
occur.
CAUTION
Installation of the transducer or water temperature sensor inside the hull with
adhesive should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
When you work using electric tools, please keep your hands dry.
If your hands are wet, it causes to electric shock.
Perfect waterproof treatment should be done when you install the transducer or
water temperature sensor through the hull.
If waterproof is not sufficient, it causes to marine disaster because water comes
in.
• Do not install on the aluminum boat. (It may cause to corrosion.)
When you pull out or insert the plug of transducer or water temperature sensor,
please be sure to turn the power switch off.
It causes to electric shock.

1-4. TFT LCD PANEL

As TFT LCD panel is made with high precision technology, over 99% is effective
pixel but less than 0.01% pixel is lacked or there exists pixel light always. It is not
trouble. Please understand it in advance.
3