Installation Of The Unit - Honda HE-670 Operation Manual

7. INSTALLATION OF THE UNIT

WARNING
Do not install it simply.
It causes to the accident like wound.
• Please install correctly according to [Installation of the Unit].
1.<Decision of place you install>
While the bracket is mounted with unit, you decide the place you install
and put the mark.
• Keep enough space behind the unit to connect with cables.
2.<Installation of bracket>
Install the bracket with supplied screws into four outside holes.
• Face two open sides of bracket to rear of the unit.
3.<Installation of the unit>
Install the unit referring to the below figure.
• Make sure to put rubber rings and washers at positions on below figure.
Display Unit
Mushroom
Tapping Screw
Bracket
12
Clamping Knob
Washer
Rubber Ring