Network Setup - Samsung SNP-3120 User Manual

setup screen
pTZ limit
You can specify restrictions on the pan or tilt function.
1.
From the Setup menu, select the
<Audio & video (
2. Click <pTZ limit>.
3.
Decide if you want to limit the PTZ
operations. If so, specify the details.
Pan / Tilt Limit : Select a mode to set

between Pan limit and Tilt limit.
- Use : Select whether to use limit in
set mode.
- [
- [
- [
fied range between the start point and end point respectively.

neTworK SeTup

interface
1.
From the Setup menu, select the
<network (
2.
Click <interface>.
3. Set the <interface> and <ipv6 setup>
as necessary.
IP type : Select an IP connection

type.
- Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.
- DHCP : Specify the DNS1 and DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and password.
If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.
MAC address : Shows the MAC address.

IP address : Displays the current IP address.

Subnet mask : Displays the <Subnet mask> for the set IP.

_ setup screen
)> tab.
] : Start limit setting.
] : The starting point will be saved.
] : The ending point will be saved then the limit mode runs in speci-
)> tab.