Installation (Snp-3120) - Samsung SNP-3120 User Manual

installation & connection

inSTALLATion (Snp-3120)

on-ceiling installation
1.
Drill a hole of 60mm diameter on the ceiling
and run the wires down through it.
2.
Install the Mount Bracket onto the hold and
fix it using 4 screws.
Do not connect the camera to a power outlet
J
until the installation is complete. Supplying
power in the middle of the installation may cause
fire or damage the product.
3.
Connect each camera cable to the proper ter-
minals on the bottom of the camera. For more
detailed instructions, please refer to Page 16:
"Camera wiring interface Board".
4.
DIP switches for communication and ID setup
are located on the bottom of the camera. For
more instructions, please refer to Page 22.
2_ installation & connection