Cisco 7920 Phone Manual page 60

If you want to...
Automatically connect to
the WLAN by scanning all
profiles.
Choose a different profile
Tips
• You can enter or change your EAP username and password by choosing Network Profiles > "your
active profile" > 802.11b Configuration> EAP. See the "Setting Username and Passwords" section
on page 17.
• Do not make changes to settings in to your network profiles without consulting your system
administrator first.
• Your system administrator has detailed information about the menu options and settings in the
Network Profiles menu.
52
Then...
1. Choose Menu > Profiles > Network Profile.
2. Scroll to Auto and press Select.
3. Select Activate to change the profile.
The appears next to Auto.
4. Press Back to return to the menu.
1. Choose Menu > Profiles > Network Profile.
2. Scroll to a different profile and press Select to use settings for that
profile.
3. Select Apply Change. The appears next to the active profile.
OL-9474-01