Panasonic KX-TDA0480 Installation Manual page 127

SNMP Folder
If an SNMP compatible network management system is present, use the SNMP folder to record
information about available Trap IP addresses and the facility's Community name.
• This information is recorded on the Common Configuration worksheet described in Section
2.2.4 Common Configuration Worksheet of this document, and can also be entered for
selected unit groups using the Edit Data/Edit Common Configuration items on the Unit
menu. See Section 4.8 for the procedure using the Common Configuration facility in the
Maintenance Console Software.
When a Gateway unit is selected for Edit Common Configuration, the only values applied
are those configured for SNMP. All other Common Configuration parameters are ignored.
Use the Parameters section to configure the Trap IP address and the Community name.
IP Address for Trap
Transmission 1
IP Address for Trap
Transmission 2
Installation Manual
Type the IP address for the first Trap Transmission facility.
The IP address must conform to Internet Protocol addressing
requirements.
Type the IP address for a second Trap Transmission facility.
The IP address must conform to Internet Protocol addressing
requirements.
Logical Installation
127