Troubleshooting; Maintenance; Protecting The Environment; Service Information - Black & Decker GL360 Instruction Manual

troUBLEsHootInG

If your tool seems not to operate properly, follow the
instructions below. If this does not solve the problem,
please contact your local Black & Decker repair agent.
Warning! Before proceeding, unplug the tool.
Appliance runs slowly
► Check that the spool housing can rotate freely.
Carefully clean it if necessary.
► Check that the cutting line does not protrude more than
11cm from the spool housing. If it does, cut it off so that
it just reaches the line trimming blade.
If the bump feed does not work
► Keep the tabs depressed and remove the spool cover
from the housing.
► Pull the cutting line until it protrudes 11cm from the
housing. If insufficient cutting line is left on the spool,
install a new spool of cutting line as instructed above.
► Align the tabs on the spool cover with the cut outs in
the housing.
► Push the cover onto the housing until it snaps securely
into place.
► If the cutting line protrudes beyond the trimming blade,
cut it off so that it just reaches the blade.
If the bump feed still does not work or the spool is jammed,
try the following suggestions:
► Carefully clean the spool cover and housing.
► Remove the spool and check that the spring is in place.
► Remove the spool and unwind the cutting line, then
wind it on neatly again as described above. Replace
the spool as instructed.

MAIntEnAnCE

Your Black & Decker corded/cordless appliance/tool has
been designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool/appliance care
and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
► Switch off and unplug the appliance/tool.
► Or switch off and remove the battery from the
appliance/tool if the appliance/tool has a separate
battery pack.
► Or run the battery down completely if it is integral and
then switch off.
► Unplug the charger before cleaning it. Your charger
does not require any maintenance apart from regular
cleaning.
► Regularly clean the ventilation slots in your
tool/appliance and charger using a soft brush or dry
cloth.
► Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.

ProtECtInG tHE EnVIronMEnt

Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your Black & Decker product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical products
from the household, at municipal waste sites or by
the retailer when you purchase a new product.

sErVICE InForMAtIon

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
sPECIFICAtIons
Input Voltage
AR
B2C
B3
B2
BR
No-Load Speed
Weight
Hand/arm weighted vibration value according to EN 786:
= 7.5 m/s , uncertainty (K) = 1.5 m/s
2
L (sound pressure) 80 dB(A),
pa
uncertainty (K) = 1.5 dB(A)
EnGLIsH • 17
GL360
Power
220V ~ 50Hz 350W
220V ~ 50-60Hz 350W
120V ~ 60Hz 350W
220V ~ 60Hz 380W
127V ~ 60Hz 380W
11500 min
-1
1,5kg
2