Cisco EXPLORER 2100 Installation Manual page 4

Digital home communications terminals
Hide thumbs Also See for EXPLORER 2100:
Table of Contents

Advertisement

IMPORTANT RULES FOR SAFE OPERATION,
Operating Environment
This product is designed for operation indoors with a
temperature range from 32° to 104° F (0° to 40°C).
Each product should have adequate spacing on all
sides so that the cooling air vents on the chassis are
not blocked.
Liquid or Moisture
Do not expose this equipment to liquid or moisture. Do
not place this equipment on a wet surface. Do not spill
liquids on or near this equipment.
Lightning and Power Surges
Ground (earth) your cable system to provide some
protection against voltage surges and built-up static
charges. If you have questions, call your cable
company.
Servicing
Do not open the cover of this equipment. If you open
the cover, your warranty will be void. Refer all servicing
to qualifi ed personnel only. Contact your cable
company for instructions.
4
continued
Power Cord Protection
Arrange all power cords so that people cannot walk on
the cords, place objects on the cords, or place objects
against the cords, which can damage the cords. Pay
particular attention to cords that are at plugs, at
electrical outlets, and at the places where the cords
exit the equipment.
Power Sources
A label on this equipment indicates the correct power
source for this equipment. Operate this equipment
only from an electrical outlet that has the voltage and
frequency that the label indicates.
If you are unsure of the type of power supply to your
residence, consult Cisco Systems, Inc., or your local
power company.
WARNING: Avoid electric shock and fi re
hazard. Do not overload electrical outlets and
exten sion cords. For equipment that requires
battery power or other sources to operate,
refer to the operating instructions for that
equipment.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Explorer 3100

Table of Contents