Advertisement
TRANSFERRING WITH CAMP-ON
When you transfer a call to another station and receive a busy signal, you can
camp the call on to this station. Hang up when you hear the busy signal. The
called party is alerted that a call is waiting.
NOTE:
If you receive No More Calls tone, the station has no key available to
receive another call. Press TRANSFER to return to the caller.
If an outside call is camped-on to your telephone or another station is camped-
on to you:
Your keyset rings and the call that is waiting (camped-on) flashes green.
Press the flashing button to answer; the other call is put on hold automati-
cally if your station has the Automatic Hold feature set. If not, you must
press HOLD and then the flashing button or finish the call and hang up; the
waiting call will ring.
Lift the handset or press the ANS/RLS key to answer.
NOTE:
Intercom calls will not go on Automatic Hold.
To make a conference call while engaged in a conversation:
Press the CONF button and receive conference tone.
Make another call, either intercom or outside, press the CONF button and
receive conference tone.
Make another call or press the CONF button to join all parties. You can
conference up to five parties (you and four others).
Repeat the last step until all parties are added.
Hang up to leave the conference call.
NOTE:
When attempting to add another party to the conference and you are
not able to reach the desired person, hang up. Press the CONF button
again to return to the previous conversation.
CALL WAITING
CONFERENCE CALLS
Advertisement
