Page 1 GABD-000264 OfficeServ 7000 Series Call Server Programming Manual...
Page 2 This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd.
Page 3: Introduction
This manual describes a programming method for the OfficeServ 7000 Series system users. OfficeServ 7000 Series allows you to utilize a digital phone to simply change the system setup. Likewise, using a phone to change the system setup is called MMC (Man Machine Communication) program.
Page 4: Conventions
The lined box with ‘Courier New’ font will be used to distinguish between the main content and console output screen text.  ‘Bold Courier New’ font will indicate the value entered by the operator on the console screen. © SAMSUNG Electronics Co., Ltd.
Page 5: Reference Manuals
OfficeServ 7000 Series Call Server Programming Manual Reference Manuals The following guides are also provided with your OfficeServ 7000 Series system. OfficeServ 7000 Series Installation Guide Describes the installation procedures and specifications for the OfficeServ 7000 Series system. OfficeServ 7000 Series General Description Describes the business features available with the OfficeServ 7000 Series system.
Page 7: Safety Concerns
OfficeServ 7000 Series Call Server Programming Manual SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation. Symbols Caution Indication of a general caution...
Page 8: Warning
SAMSUNG distributor. Compliance with the National Version Standards For the national version, OfficeServ 7000 Series is designed to comply with the standards of the corresponding country. Therefore, if you need to use MMC 812 (Set Country Code), please consult your dealer for advice.
Page 9: Table Of Contents
OfficeServ 7000 Series Call Server Programming Manual TABLE OF CONTENTS INTRODUCTION Purpose ..............................I Audience ..............................I Document Content and Organization ....................... I Conventions ............................... II Console Screen Output ..........................II Reference Manuals ..........................III Revision History ............................III SAFETY CONCERNS Symbols ..............................
Page 10 [201] CHANGE CUSTOMER PASSCODE ..................2-50 [202] CHANGE FEATURE PASSCODE .................... 2-51 [203] ASSIGN UA DEVICE ......................... 2-53 [204] COMMON BELL CONTROL ..................... 2-54 [205] ASSIGN LOUD BELL ........................ 2-55 [206] BARGE-IN TYPE ........................2-56 VIII © SAMSUNG Electronics Co., Ltd.
Page 11 OfficeServ 7000 Series Call Server Programming Manual [207] ASSIGN VM/AA PORT ....................... 2-57 [208] ASSIGN RING TYPE ........................2-58 [209] ASSIGN ADD-ON MODULE ...................... 2-59 [210] CUSTOMER ON/OFF PER TENANT ..................2-60 [211] DOOR RING ASSIGNMENT ..................... 2-65 [214] DISA ALARM RINGING STATION .................... 2-66 [217] TRAFFIC REPORT OPTION .....................
Page 12 [503] TRUNK-WIDE TIMERS ......................2-175 [504] PULSE MAKE/BREAK RATIO ....................2-177 [505] ASSIGN DATE AND TIME ...................... 2-178 [506] TONE CADENCE ........................2-179 [507] ASSIGN RING PLAN TIME ..................... 2-182 [508] CALL COST ..........................2-184 © SAMSUNG Electronics Co., Ltd.
Page 13 OfficeServ 7000 Series Call Server Programming Manual [510] SLI RING CADENCE .......................2-185 [511] MSG WAITING LAMP CADENCE ...................2-187 [512] HOLIDAY ASSIGNMENT ......................2-188 [513] HOTEL TIMER ..........................2-189 [514] TONE SOURCE ........................2-190 [515] DAYLIGHT ASSIGNMENT.......................2-191 [600] ASSIGN OPERATOR GROUP ....................2-192 [601] ASSIGN STATION GROUP .....................2-193 [602] STATION GROUP NAME ......................2-198...
Page 14 [800] ENABLE TECHNICIAN PROGRAM ..................2-317 [801] CHANGE TECHNICIAN PASSCODE ..................2-318 [802] CUSTOMER ACCESS MMC NUMBER ................2-319 [803] ASSIGN TENANT GROUP ..................... 2-320 [804] SYS I/O MODE ........................2-321 [805] TX LEVEL AND GAIN ......................2-324 © SAMSUNG Electronics Co., Ltd.
Page 15 OfficeServ 7000 Series Call Server Programming Manual [806] CARD PRE-INSTALL .......................2-326 [807] PHONE VOLUME CONTROL ....................2-328 [810] HALT PROCESSING .......................2-330 [811] RESET SYSTEM ........................2-331 [812] SET COUNTRY CODE ......................2-332 [813] HOTEL OPERATION .......................2-333 [815] CUSTOMER DATABASE COPY .....................2-334 [816] CONFERENCE GAIN ......................2-336 [817] STOP MEMORY ........................2-337...
Page 16 [889] DISPLAY SERVER STATUS ....................2-441 [890] INITIALIZE PORT ........................2-442 ABBREVIATION A ~ C ................................I D ~ I ................................II K ~ O ................................. III P ~ S................................. IV T ~ X ................................V © SAMSUNG Electronics Co., Ltd.
Page 17 OfficeServ 7000 Series Call Server Programming Manual LIST OF FIGURES Figure 1.1 24B LCD DCS Euro Phone ................... 1-2 Figure 1.2 DS-5038S Phone ....................1-3 Figure 1.3 DS/ITP-5014D/5021D Phone ................1-4 Figure 1.4 DS-5014S/5007S Phone ..................1-4 LIST OF TABLES Table 1.1 Station Level Programming list ................
Page 19: Chapter 1. Overview Of Mmc Programming
OfficeServ 7000 Series Call Server Programming Manual CHAPTER 1. Overview of MMC Programming In this chapter, the things to know before you start MMC programming, and the phone buttons and cautions will be discussed. 1.1 Introduction to Programming The MMC means the changes on the data that is used for the system operation program.
Page 20: Digital Phones
6B LCD phone has 6 programmable buttons: left column is numbered 1-3 from the top; right column is numbered 4-6 from the top. Buttons 1 to 3 are special buttons ‘A–C’ and buttons 4 to 6 are special buttons ‘D–F’ used for programming. © SAMSUNG Electronics Co., Ltd.
Page 21: Ds/Itp-5000 Series Phones
OfficeServ 7000 Series Call Server Programming Manual The special buttons are referred to within the relevant MMCs. For example, button ‘A’ is used to toggle between uppercase and lowercase characters when entering text on the display. All programmable buttons can be programmed with functions as required.
Page 22: Figure 1.3 Ds/Itp-5014D/5021D Phone
(Programmable Buttons: 7) A Button A Button Programmable Buttons Soft Buttons Scroll Button Speaker Status Indicator LCD screen Volume Button Redial Button Conference Button Transfer Button Dial Buttons Speaker Button Hold Button Microphone Figure 1.4 DS-5014S/5007S Phone © SAMSUNG Electronics Co., Ltd.
Page 23 OfficeServ 7000 Series Call Server Programming Manual The DS/ITP-5000 series phones have 38, 21, 14 or 7 programmable buttons that can be programmed with functions. Also, there are several other function buttons: the dial buttons, the volume control buttons, the redial button that allows you to redial the last phone...
Page 24: Cautions In Programming
 Programming mode halts if the handset is picked up or the Transfer button is pressed or the phone is unplugged. Any data previously entered in the display is saved. © SAMSUNG Electronics Co., Ltd.
Page 25: Program List By User's Level
OfficeServ 7000 Series Call Server Programming Manual 1.4 Program List by User’s Level The MMC program can be divided into programmable one and non-programmable one. The programmable MMC is classified into 3 levels, such as technician, operator, and station level. In this section, the programmable MMC for each level will be introduced.
Page 26: Operator Level Programming
MMC: 214 DISA ALARM RINGING STATION MMC: 217 TRAFFIC REPORT OPTION MMC: 219 RELAY TYPE MMC: 220 ISDN SERVICE TYPE MMC: 221 EXTENSION TYPE MMC: 222 FAX PAIR MMC: 224 AUDIO PROMPT MMC: 225 IP-UMS/IVR SERVICE © SAMSUNG Electronics Co., Ltd.
Page 27: Table 1.3 Station Related Mmc List
OfficeServ 7000 Series Call Server Programming Manual 1.4.2.2 Station Related MMC The MMC programs related to the function of the station are as follows: Table 1.3 Station Related MMC list MMC No. MMC Name MMC: 300 CUSTOMER ON/OFF PER STATION...
Page 28: Table 1.4 Trunk Related Mmc List
CID TRUNKS MMC: 426 TRUNK GAIN CONTROL MMC: 428 ASSIGN TRUNK/TRUNK USE MMC: 432 SET H-TRK MMC: 433 COST RATE MMC: 434 CONNECTION STATUS MMC: 436 TRUNK TMC GAIN MMC: 437 16 TRUNK GAIN 1-10 © SAMSUNG Electronics Co., Ltd.
Page 29: Table 1.5 Timer And Tone Related Mmc List
OfficeServ 7000 Series Call Server Programming Manual 1.4.2.4 Timer and Tone Related MMC The MMC programs related to the function of the timer and tone are as follows: Table 1.5 Timer and Tone Related MMC list MMC No. MMC Name...
Page 30: Table 1.6 Group Related Mmc List
UCD OPTIONS MMC: 608 ASSIGN REVIEW BLOCK MMC: 609 CALL LOG BLOCK MMC: 611 ALLOW TEXT MESSAGING MMC: 612 ALLOW GROUP CONFERENCE MMC: 614 STATION/TRUNK USE GROUP MMC: 615 MGI GROUP MMC: 616 MGI USER 1-12 © SAMSUNG Electronics Co., Ltd.
Page 31: Table 1.7 Tables, Codes, Aa, Dect And Vm Mmc List
OfficeServ 7000 Series Call Server Programming Manual 1.4.2.6 Tables, Codes, AA, DECT and VM MMC The MMC programs related to the function of the tables, codes, AA, DECT and VM are as follows: Table 1.7 Tables, Codes, AA, DECT and VM MMC list MMC No.
Page 32 MMC: 757 VM IN/OUT MMC: 758 VM DAY/NIGHT MMC: 759 CLI RINGING MMC: 760 ITEM COST TABLE MMC: 761 TAX RATE SETUP MMC: 762 ROOM COST RATE MMC: 763 SECOND LCR MMC: 764 DISA PASSWORD 1-14 © SAMSUNG Electronics Co., Ltd.
Page 33: Technician Level Programming
OfficeServ 7000 Series Call Server Programming Manual 1.4.3 Technician Level Programming This level is allowed to program every level of program. This level of programming can be done on every phone within the system, but it can be done for only one phone at a time.
Page 34 LICENSE MMC: 861 SYSTEM OPTIONS MMC: 863 SYSTEM NODE INFORMATION MMC: 865 FAN POWER CONTROL MMC: 867 IRM DSP MODE SELECT MMC: 868 REMOTE STATION MMC: 889 DISPLAY SERVER STATUS MMC: 890 INITIALIZE PORT 1-16 © SAMSUNG Electronics Co., Ltd.
Page 35: Program List By Function
OfficeServ 7000 Series Call Server Programming Manual 1.5 Program List by Function This section describes MMC programs are classified by the function of the OfficeServ 7000 Series. 1.5.1 Phone Function The MMC programs related to the function of a phone that is connected with the OfficeServ 7000 Series are as follows: Table 1.9 Phone Function Programming list...
Page 36: Networking Function
MMC: 834 H.323 OPTIONS MMC: 835 MGI DSP OPTIONS MMC: 836 H.323 GK OPTIONS MMC: 837 SIP OPTIONS MMC: 838 PRIVATE IP ADDRESSES MMC: 839 SIP USER MMC: 843 MPS OPTIONS MMC: 861 SYSTEM OPTIONS 1-18 © SAMSUNG Electronics Co., Ltd.
Page 37: Wlan Function
OfficeServ 7000 Series Call Server Programming Manual 1.5.4 WLAN Function The MMC programs related to the function of WLAN (Wireless Local Area Network) are as follows: Table 1.12 WLAN Function Programming list MMC Program No. Program Description MMC: 845 WLAN PARAMETERS...
Page 38: Diagnosis Function
FAX PAIR MMC: 433 COST RATE MMC: 513 HOTEL TIMER MMC: 748 COSTING DIAL PLAN MMC: 749 RATE CALCULATION TABLE MMC: 760 ITEM COST TABLE MMC: 761 TAX RATE SETUP MMC: 762 ROOM COST RATE 1-20 © SAMSUNG Electronics Co., Ltd.
Page 39: Chapter 2. Mmc Programming
OfficeServ 7000 Series Call Server Programming Manual CHAPTER 2. MMC Programming This chapter describes how to use each MMC program as it was listed. 2.1 Overview of Programming Procedure The order of programming will be discussed before explaining programming method of each list.
Page 40: Programming Procedure
If so, the station cannot be locked, but a locked station can be unlocked.  A station can be locked or unlocked under any condition when the station is in Operator Level Programming or Technician Level Programming. DEFAULT DATA ALL STATIONS UNLOCKED © SAMSUNG Electronics Co., Ltd.
Page 41 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 100. [201] STN LOCK UNLOCKED Display shows: 2) Dial station number. (e.g., 205) [205] STN LOCK UNLOCKED Press Volume button to select station and press Right Soft button to move cursor.
Page 42: Change User Passcode
Right Soft button to move the cursor right. 3) Press Hold button to reset passcode. [205] PASSCODE PASSCODE:1234 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 100 STATION LOCK © SAMSUNG Electronics Co., Ltd.
Page 43: Call Forward
OfficeServ 7000 Series Call Server Programming Manual [102] CALL FORWARD Allows the system administrator to program the call forward destinations for other station users. This MMC also allows call forward to be set after the destination has been entered. Allows several types of call forwarding: FORWARD ALL, FORWARD NO ANSWER, FORWARD BUSY and FORWARD DND.
Page 44 Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 301 ASSIGN STATION COS MMC 501 SYSTEM TIMERS MMC 502 STATION-WIDE TIMERS MMC 701 ASSIGN COS CONTENTS MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING © SAMSUNG Electronics Co., Ltd.
Page 45: Set Answer Mode
OfficeServ 7000 Series Call Server Programming Manual [103] SET ANSWER MODE Allows the system administrator to change the answer mode of any phone. Each phone can have its answer mode set to one of the following options: Type Description RING MODE The phone will ring in one of eight custom ring patterns.
Page 46 Press Volume button to select ring mode and press Right Soft button to return to step 2 above. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 111 PHONE RING TONE © SAMSUNG Electronics Co., Ltd.
Page 47: Station Name
OfficeServ 7000 Series Call Server Programming Manual [104] STATION NAME Allows the system administrator or technician to enter a name up to 11 characters to identify an individual station. ENTERING CHARACTERS Names are written using the keypad. Each key press selects a character. Pressing the dial pad key moves the cursor to the next position.
Page 48 SAM SMITH above and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-10 © SAMSUNG Electronics Co., Ltd.
Page 49: Station Speed Dial
OfficeServ 7000 Series Call Server Programming Manual [105] STATION SPEED DIAL Allows the system administrator or technician to assign phone numbers to a station’s personal speed dial locations. CONDITIONS Each station may have up to 50 locations (or bins) assigned to it in MMC 606 (Assign Speed Block).
Page 50 Dial Name) to enter a name for speed dial. Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 106 STATION SPEED DIAL NAME MMC 606 ASSIGN SPEED BLOCK 2-12 © SAMSUNG Electronics Co., Ltd.
Page 51: Station Speed Dial Name
OfficeServ 7000 Series Call Server Programming Manual [106] STATION SPEED DIAL NAME Allows a name up to 11 characters to be entered for each personal speed dial location. This allows speed dial numbers to be selected by name when the directory dial feature is used.
Page 52: Key Extender
PMSG Programmed Station Messaging 01-20 Ring Plan Room Status View (Hotel Application only) Station Group Station group number UCD Supervisor UCD group number Speed Dial Personal: 00-49, System: 500-999 TCLIP Temporary CLIP table number 2-14 © SAMSUNG Electronics Co., Ltd.
Page 53 OfficeServ 7000 Series Call Server Programming Manual (Continued) Feature Extender SVM-800 Group Message Station group number VM Memo Extension or station group number Voice Transfer VM group number DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and enter 107.
Page 54 CHAPTER 2. MMC Programming RELATED ITEMS MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING MMC 724 DIAL NUMBERING PLAN 2-16 © SAMSUNG Electronics Co., Ltd.
Page 55: Station Status
OfficeServ 7000 Series Call Server Programming Manual [108] STATION STATUS This is a READ-ONLY MMC. Displays the following attributes of a station port. Status Description PORT NO Cabinet (1-3)/Slot (1-9)/Port (1-16) TYPE Phone Type PICKUP GROUP None, 01-99 Station Group Number...
Page 56 Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 301 ASSIGN STATION COS MMC 302 PICKUP GROUPS MMC 303 ASSIGN BOSS/SECRETARY MMC 601 ASSIGN STATION GROUP MMC 604 ASSIGN STATION TO PAGE ZONE 2-18 © SAMSUNG Electronics Co., Ltd.
Page 57: Date Display
OfficeServ 7000 Series Call Server Programming Manual [109] DATE DISPLAY Allows the system administrator or technician to select the date and time display mode on a per-station basis or system-wide. Mode Description COUNTRY Sets overall display format and has two options:...
Page 58 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 505 ASSIGN DATE AND TIME 2-20 © SAMSUNG Electronics Co., Ltd.
Page 59: Station On/Off
OfficeServ 7000 Series Call Server Programming Manual [110] STATION ON/OFF Allows the system administrator to set any of the phone features listed below. Feature Default Description AUTO HOLD Automatically places an existing Trunk Line call on hold if a CALL key, trunk key or trunk route key is pressed during that call.
Page 60 USE STN RING When ON, the IP phone will be use self ring melody, otherwise the IP phone will be use system ring melody. DEFAULT DATA SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY 2-22 © SAMSUNG Electronics Co., Ltd.
Page 61 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 110. [201] STN ON/OFF AUTO HOLD :OFF Display shows: 2) Dial the station number. (e.g., 205) [205] STN ON/OFF AUTO HOLD :OFF Press Volume button to select station and press the Right Soft button to move the cursor.
Page 62: Phone Ring Tone
Right Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 114 PHONE VOLUME MMC 318 DISTINCTIVE RINGING 2-24 © SAMSUNG Electronics Co., Ltd.
Page 63: Alarm Reminder Clock
OfficeServ 7000 Series Call Server Programming Manual [112] ALARM REMINDER CLOCK Allows the system administrator or technician to set or change the alarm clock/appointment reminder feature for any station. Three alarms may be set for each station and each alarm may be defined as a one-time or TODAY alarm, or as a DAILY alarm.
Page 65: View Memo Number
OfficeServ 7000 Series Call Server Programming Manual [113] VIEW MEMO NUMBER Allows a station user the ability to view a memo left by the user. A memo can be left by entering it via the dial keypad using the table below. A memo of up to and including 13 characters can be entered.
Page 66: Phone Volume
DEFAULT DATA RING VOLUME: 4 OFF-HOOK RING VOLUME: 4 HANDSET VOLUME: 4 (In case of WIP, 6) SPEAKER VOLUME: 13 (In case of WIP, 4) BGM VOLUME: 13 PAGE VOLUME: 13 HEADSET VOL: 6 2-28 © SAMSUNG Electronics Co., Ltd.
Page 67 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 114. [201] STN VOLUME RING VOLUME:4 Display shows: 2) Dial phone number. (e.g., 205) [205] STN VOLUME RING VOLUME:4 3) Dial volume type. (e.g., 3)
Page 68: Set Programmed Message
4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 715 PROGRAMMED STATION MESSAGE MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING 2-30 © SAMSUNG Electronics Co., Ltd.
Page 69: Alarm And Message
OfficeServ 7000 Series Call Server Programming Manual [116] ALARM AND MESSAGE Allows the system administrator or technician to set or change the alarm clock/appointment reminder feature for any station. Three alarms may be set for each station and each alarm may be defined as a one-time or TODAY alarm, or as a DAILY alarm.
Page 70 6) Enter message and press Right Soft button to return to [205] ALM REM Meeting step 2. 7) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 112 ALARM REMINDER CLOCK 2-32 © SAMSUNG Electronics Co., Ltd.
Page 71: Edit Text Message
OfficeServ 7000 Series Call Server Programming Manual [117] EDIT TEXT MESSAGE Allows the system administrator or technician to set or change text messages for any station. One station can use up to 10 text messages. CONDITIONS Only stations allowed to use text messages in MMC 611 can be selected here. Large LCD phones are automatically allowed.
Page 72: Conference Group
4) Dial 0 to select name or dial 1~4 to select member. [205] GRP (1)MBR1 NONE Press Volume button to select name or member and press Right Soft button to move cursor. Press Left Soft button to return to step 3. 2-34 © SAMSUNG Electronics Co., Ltd.
Page 73 OfficeServ 7000 Series Call Server Programming Manual 5) Enter conference member dial number and press Right [205] GRP (1)MBR1 9-2794296 Soft button to return to step 4. 6) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC.
Page 74: Caller Id Display
CLI NAME FIRST. RING LINE2 When incoming call is ringing, the specific information is displayed in the lower line of the phone display. RING LINE2 has the same options as RING LINE1 2-36 © SAMSUNG Electronics Co., Ltd.
Page 75 OfficeServ 7000 Series Call Server Programming Manual (Continued) Type Description When incoming call is answered, the specific information is displayed in CONV INCOM the upper line of the phone display. According to priority, it displays CLI number or CLI NUMBER FIRST CLI name or trunk number.
Page 76 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 312 ALLOW CALLER ID MMC 608 ASSIGN REVIEW BLOCK MMC 728 CID TRANSLATION TABLE 2-38 © SAMSUNG Electronics Co., Ltd.
Page 77: Large Lcd Options
OfficeServ 7000 Series Call Server Programming Manual [120] LARGE LCD OPTIONS Allows the system administrator to set any of the following options for large LCD phones. Option Description IDLE DISPLAY Sets whether to display ‘CALENDAR’ or ‘INFORMATION’ on LCD when idle.
Page 78 EXT NAME Right Soft button. 5) Press Transfer button to save and exit. [203] DS KEY DSP TEL NUMBER Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 719 IDLE DISPLAY 2-40 © SAMSUNG Electronics Co., Ltd.
Page 79: Phone Language
OfficeServ 7000 Series Call Server Programming Manual [121] PHONE LANGUAGE Allows the system administrator to assign an LCD display based on the user’s own language. Language Language ENGLISH SPANISH GERMAN SWEDISH PORTUGAL SPANISH/USA NORSK FRENCH/CANADA DANISH FINISH DUTCH ITALY DEFAULT DATA...
Page 80: News Display Speed
Right Soft button to select a station. Select all stations. 3) Dial speed option. (03~10) [205] CALL SPEED 0304 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-42 © SAMSUNG Electronics Co., Ltd.
Page 81: Executive State
OfficeServ 7000 Series Call Server Programming Manual [125] EXECUTIVE STATE Allows the system administrator or technician to set an executive station’s options, as follows. Option Description EXEC STATE When working with EASYSET, the state of the executive station can be displayed.
Page 83: Mobex Number
OfficeServ 7000 Series Call Server Programming Manual [126] MOBEX NUMBER This MMC allows that if extension couple with MOBEX (Mobile Extension) station, user can set or change corresponding MOBEX number, CLI number, and Deactivation/Activation per MOBEX station. Option Description MOBEX number...
Page 84: Show License
SIP LICENSE STS Maximum number and resisted number of Samsung standard SIP Station. Samsung standard SIP Station means standard SIP Station produced by Samsung. If License Key is not inputted or invalid, Display show ‘INVAILD LICENSE’ 3RDSIP LICENSE Maximum number and resisted number of Non-Samsung standard SIP Station.
Page 85 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 199. MGI LICENSE STS Display shows: MAX:008 2) Press Volume button. VMS LICENSE STS MAX:004 Display show admission status: 3) Press Transfer button to save and exit.
Page 86: Open Customer Programming
4) Press Speaker button to advance MMC entry level 201:CUS.PASSCODE and press Volume button to select MMC. SELECT PROG. ID Enter MMC number and press Right Soft button to enter MMC. 5) Press Transfer button to exit. 2-48 © SAMSUNG Electronics Co., Ltd.
Page 87 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 201 CHANGE CUSTOMER PASSCODE MMC 501 SYSTEM-WIDE TIMERS MMC 802 CUSTOMER ACCESS MMC NUMBER © SAMSUNG Electronics Co., Ltd. 2-49...
Page 88: Change Customer Passcode
Passcode failure. (return to step 2) CUST. PASSCODE VERIFY:FAILURE 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 200 OPEN CUSTOMER PROGRAMMING 2-50 © SAMSUNG Electronics Co., Ltd.
Page 89: Change Feature Passcode
OfficeServ 7000 Series Call Server Programming Manual [202] CHANGE FEATURE PASSCODE Uses to change the passcodes for the following features. Feature Description RING PLAN The passcode required to place the system in different Ring Plans (RP) or change the Ring Time Override (RTO).
Page 90 CHAPTER 2. MMC Programming 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 410 ASSIGN DISA TRUNK MMC 507 ASSIGN RING PLAN TIME 2-52 © SAMSUNG Electronics Co., Ltd.
Page 91: Assign Ua Device
OfficeServ 7000 Series Call Server Programming Manual [203] ASSIGN UA DEVICE Assigns ringing device to be accessed when a Universal Answer (UA) key is pressed or the UA pickup code is dialed. UA assignment is made in MMC 601, Assign Station Group, for a group and then the group is entered here.
Page 92: Common Bell Control
Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 203 ASSIGN UA DEVICE MMC 601 ASSIGN STATION GROUP 2-54 © SAMSUNG Electronics Co., Ltd.
Page 93: Assign Loud Bell
OfficeServ 7000 Series Call Server Programming Manual [205] ASSIGN LOUD BELL Designates the station that controls the loud bell ring output of a MIS card. (Each MIS card provides one loud bell port.) The loud bell will follow the ring cadence of the designated station.
Page 94: Barge-In Type
Press Volume button to select barge-in type and press Right Soft button. 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 301 ASSIGN STATION COS MMC 701 ASSIGN COS CONTENTS 2-56 © SAMSUNG Electronics Co., Ltd.
Page 95: Assign Vm/Aa Port
OfficeServ 7000 Series Call Server Programming Manual [207] ASSIGN VM/AA PORT Enables SLI ports to be designated as NORMAL or VM/AA. VM/AA ports receive digits designated in MMC 726 (VM/AA Options) and also receive a true disconnect signal on completion of a call. Only SLI (Single Line Interface) cards, not keyset daughter-boards, support disconnect signal.
Page 96: Assign Ring Type
Press Volume button to select type and press Left or Right Soft button to return to step 2 above. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-58 © SAMSUNG Electronics Co., Ltd.
Page 97: Assign Add-On Module
OfficeServ 7000 Series Call Server Programming Manual [209] ASSIGN ADD-ON MODULE Designates to which phone an Add-On Module (AOM) is assigned. There is no limit to the number of AOMs that can be assigned in the system. A maximum of four AOMs can be assigned to a keyset.
Page 98: Customer On/Off Per Tenant
When ON, a call recalling to a station can be picked up using Direct Call Pickup, Pickup Group and My Group features. This applies to held calls recalling and transferred calls recalling to a station. 2-60 © SAMSUNG Electronics Co., Ltd.
Page 99 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Default Description ICM EXT FWD When ON, call forward external is allowed when intercom calls are placed to a station that has Call Forward External programmed and set. DID ERR TONE This option provides error tone when an invalid DID number is received.
Page 100 When ON, and a trunk call transferred to the tie line is not answered within the transfer recall time, the call is recalled to the original transferring station. (This option may not be available in certain OfficeServ models.) 2-62 © SAMSUNG Electronics Co., Ltd.
Page 101 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Default Description VOIP REALRBT When ON, the system will connect the real path of the outgoing trunk to the incoming VoIP trunk user instead of providing virtual ringback tone. CO-CO TM ALL...
Page 102 Press Volume button to make selection and press Right Soft button. 4) Repeat steps 2-3 for other options. Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-64 © SAMSUNG Electronics Co., Ltd.
Page 103: Door Ring Assignment
OfficeServ 7000 Series Call Server Programming Manual [211] DOOR RING ASSIGNMENT Designates which station or group of stations will ring when a door phone button is pressed. If the ring plan destinations are not entered the default ring plan 1 is used. Available ring plans are 1 to 6.
Page 104: Disa Alarm Ringing Station
Press Volume button to make selection. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 202 CHANGE FEATURE PASSCODE MMC 601 ASSIGN STATION GROUP 2-66 © SAMSUNG Electronics Co., Ltd.
Page 105: Traffic Report Option
If there are no trunks in a group, the trunk group report for that group will not print. CONDITIONS If this function is required in an OfficeServ 7000 Series system with an MCP card, you must connect the LAN cable to the MCP card and be connected to a terminal supporting the TCP/IP function.
Page 106 4) Enter daily report time. (HHMM) TRAFFIC REPORT DAILY HHMM:2200 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 829 LAN PRINTER PARAMETERS 2-68 © SAMSUNG Electronics Co., Ltd.
Page 107: Relay Type
OfficeServ 7000 Series Call Server Programming Manual [219] RELAY TYPE Assigns one of relay services to MISC port. The kinds of relay service are EXTERNAL PAGE, COMMON BELL, LOUD BELL, NOT USED. This MMC cannot be used in OfficeServ 7200 MCP/7200 MP20/7400. In case of OfficeServ 7200 MCP/7200 MP20/7400, all MISC ports have fixed value, PAGE.
Page 108: Isdn Service Type
[210] ISDN SVC AUDIO 3.1 Press Volume button to select option and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-70 © SAMSUNG Electronics Co., Ltd.
Page 109: Extension Type
OfficeServ 7000 Series Call Server Programming Manual [221] EXTENSION TYPE This MMC assigns station ports for a specific use. Each phone can be designated as one of five types (see table). These types can be changed by dialing the type number or by scrolling through the types and pressing the Right Soft button to select the type.
Page 110 GUEST NO SMOKING Press Volume button to select option and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 813 HOTEL OPERATION 2-72 © SAMSUNG Electronics Co., Ltd.
Page 111: Fax Pair
OfficeServ 7000 Series Call Server Programming Manual [222] FAX PAIR Enables a guest room to have a normal phone line and fax line simultaneously. Only a Guest No Smoking Room or Guest Smoking Room can be assigned a fax pair station which is already assigned as a fax station in MMC 221.
Page 112: Audio Prompt
Right Soft button. 3) Enter the AA/VMS group number. AUDIO PROMPT STN GROUP :548 Or, select the AA/VMS group number by using the Volume button and move the cursor by pressing the Right Soft button. 2-74 © SAMSUNG Electronics Co., Ltd.
Page 113 OfficeServ 7000 Series Call Server Programming Manual 4) Enter the AA/VMS prompt number specification AUDIO PROMPT PROMPT NO.:NONE ([1]). Or, select the AA/VMS prompt number specification by using the Volume button and move the cursor by pressing the Right Soft button.
Page 114: Ip-Ums/Ivr Service
4) Press the [Transfer] button to store the data and complete the procedure or press the [Speaker] button to store the data. RELATED ITEMS Program 830 LAN PARAMETERS Program 841 System IP interworking information. Program 857 Specify a virtual cabinet card. 2-76 © SAMSUNG Electronics Co., Ltd.
Page 115: Customer On/Off Per Station
OfficeServ 7000 Series Call Server Programming Manual [300] CUSTOMER ON/OFF PER STATION Allows the following features to be enabled/disabled on a per-station basis. Option Default Description ACCESS DIAL Determines whether a user can select a trunk or trunk group by dialing its Directory Number (DN). This selection should be turned off when using LCR.
Page 116 5) Press Left Soft button to return to step 2. Press Right Soft button to return to step 1. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-78 © SAMSUNG Electronics Co., Ltd.
Page 117 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS LCR PROGRAMMING: MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE © SAMSUNG Electronics Co., Ltd. 2-79...
Page 118: Assign Station Cos
Use Volume button to scroll through classes of service and press Right Soft button to advance to the next ring plan. Use Volume button to scroll through classes of service and press Left Soft button to return to step 2. 2-80 © SAMSUNG Electronics Co., Ltd.
Page 119 OfficeServ 7000 Series Call Server Programming Manual 5) Enter the next ring plan class of service. (e.g., 05) [205] STN COS 1:05 2:01 3:01 Use Volume button to scroll through classes of service and press Right Soft button to move cursor to the next ring plan.
Page 120: Pickup Groups
4) Press Right Soft button to return to step 2 to enter more stations. Press Left Soft button to return to step 3. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-82 © SAMSUNG Electronics Co., Ltd.
Page 121 OfficeServ 7000 Series Call Server Programming Manual ACTION (PINGRING SERVICE ENABLED) DISPLAY 1) Press Transfer button and enter 302. PICKUP GROUP (01) MEMBER 01:201 Display shows: 2) Dial group number. (e.g., 02) PICKUP GROUP (02) MEMBER 01:201 Use Volume button to select group number and press Right Soft button.
Page 122: Assign Boss/Secretary
BOSS STN:205 more SECR numbers. SECR 2:202 5) Press Left Soft button to return to step 2 and continue entries. Press Transfer button and enter to exit. Press Speaker button to advance next MMC. 2-84 © SAMSUNG Electronics Co., Ltd.
Page 123 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 722 STATION KEY PROGRAMMING © SAMSUNG Electronics Co., Ltd. 2-85...
Page 124: Assign Extension/Trunk Use
3) Dial the station use group number. (e.g., 304) (005) USE (304) DIAL:YES ANS:YES Press Volume button to select trunk use group and press Right Soft button. (005) USE (ALL) DIAL:YES ANS:YES Select all trunk use groups. 2-86 © SAMSUNG Electronics Co., Ltd.
Page 125 OfficeServ 7000 Series Call Server Programming Manual 4) Press Volume button to select YES/NO option. (005) USE (304) DIAL:NO ANS:YES Dial 1 for YES or 0 for NO and press Right Soft button to move cursor to ANS option. Press Volume button to select YES/NO Option.
Page 126: Assign Forced Code
Press Volume button to select option and press Right Soft button to return to step 2. 4) Press Transfer button and enter to exit. Press Speaker button to advance next MMC. RELATED ITEMS MMC 707 AUTHORIZATION CODE MMC 708 ACCOUNT CODE 2-88 © SAMSUNG Electronics Co., Ltd.
Page 127: Hot Line/Off Hook Selection
OfficeServ 7000 Series Call Server Programming Manual [306] HOT LINE/OFF HOOK SELECTION Allows a station to make a predetermined call, similar to a ring-down circuit, upon the expiration of a timer. (see MMC 502, STATION TIMERS, Off-Hook Selection Timer) CONDITIONS ...
Page 128: Assign Background Music Source
Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 309 ASSIGN STATION MOH SOURCE MMC 408 ASSIGN TRUNK MOH SOURCE 2-90 © SAMSUNG Electronics Co., Ltd.
Page 129: Assign Station Moh Source
OfficeServ 7000 Series Call Server Programming Manual [309] ASSIGN STATION MOH SOURCE Assigns a Music On Hold source to phones. There is one internal music source and two additional external music sources are provided if a MIS card is installed in the system.
Page 130: Lcr Class Of Service
4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS LCR PROGRAMMING: MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE 2-92 © SAMSUNG Electronics Co., Ltd.
Page 131: Allow Caller Id
OfficeServ 7000 Series Call Server Programming Manual [312] ALLOW CALLER ID Allows the system administrator or technician to allow or deny CID data to be sent from, or displayed at, LCD phones. Option Description Set whether to display CID. Set whether to send CID for ISDN calls.
Page 132: Confirm Outgoing Call
Press Volume button to make selection and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 501 SYSTEM-WIDE TIMERS 2-94 © SAMSUNG Electronics Co., Ltd.
Page 133: Customer Set Relocation
OfficeServ 7000 Series Call Server Programming Manual [315] CUSTOMER SET RELOCATION Customer Set Relocation allows the system administrator or technician to exchange similar stations in the system without hardware changes. All the button settings, features, etc. for a phone can be copied to another. The user can then relocate to the new station and work as normal.
Page 134: Copy Station Usable
4) Press Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 304 ASSIGN EXTENSION/TRUNK USE MMC 614 STATION/TRUNK USE GROUP 2-96 © SAMSUNG Electronics Co., Ltd.
Page 135: Assign Station/Station Use
OfficeServ 7000 Series Call Server Programming Manual [317] ASSIGN STATION/STATION USE This MMC is used to determine whether stations in one use group can make intercom calls to stations in other use groups. (within the same tenant) Use groups are set up in MMC 614.
Page 136: Distinctive Ringing
Program 510 depending on the type of the calling parties. If specified as 1-5, the type of calling parties is ignored and the following ring cadence is used: At this time, the ring cadence is specified in Program 510. DEFAULT DATA T: F-STN C: F-STN 2-98 © SAMSUNG Electronics Co., Ltd.
Page 137 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press the Transfer button and 318. [201] DIST.RING DGP TONE:NONE 2) Press an extension number or a trunk line number. [202] DIST.RING DGP TONE:NONE (e.g., 202) Or, select the extension or trunk by pressing the Volume button and move the cursor by pressing the Right Soft button.
Page 138: Branch Group
Press Volume button to make selection and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-100 © SAMSUNG Electronics Co., Ltd.
Page 139: Preset Forward No Answer
OfficeServ 7000 Series Call Server Programming Manual [320] PRESET FORWARD NO ANSWER Allows a technician to assign a default destination for Forward No Answer (FNA) to each station on the system. These destinations may be the same or different for each station.
Page 140 Press Volume button to make selection and press Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 102 CALL FORWARD 2-102 © SAMSUNG Electronics Co., Ltd.
Page 141: Calling Party Number
OfficeServ 7000 Series Call Server Programming Manual [323] CALLING PARTY NUMBER Allows a number up to 16 digits to be entered and associated with a station or trunk number. When this station makes an outgoing call, the number entered here will be the Calling Party Number sent on the call.
Page 142 CHAPTER 2. MMC Programming RELATED ITEMS MMC 312 ALLOW CID MMC 419 PRI OPTION MMC 420 BRI OPTION MMC 834 H.323 OPTIONS MMC 837 SIP OPTIONS 2-104 © SAMSUNG Electronics Co., Ltd.
Page 143: Sli2 Gain
OfficeServ 7000 Series Call Server Programming Manual [324] SLI2 GAIN Adjusts the receive sensitivities for each port of the SLI2 card. The receive sensitivity by port can be adjusted but the actual sensitivity are applied in the unit of card. To reflect the changed value, the download process should be carried out after setting a desired sensitivity for each port.
Page 144: Rbt Message
Right Soft button 4) Press the Transfer button to complete the procedure or press the Speaker button to store the data. RELATED ITEMS Program 224 Specify Voice Alarm Message Program 316 Specify Identification Ring 2-106 © SAMSUNG Electronics Co., Ltd.
Page 145: Multi Media Service
OfficeServ 7000 Series Call Server Programming Manual [327] MULTI MEDIA SERVICE MMC [327] This option is available only in certain OfficeServ models Type Description MMS RBACK Specifies the function to receive the multimedia information from the multimedia server and display the information, and not the function to provide ring back tone by interworking with the Server.
Page 146 CHAPTER 2. MMC Programming RELATED ITEMS Program 224 Specify a Voice Alarm Message Program 830 LAN PARAMETERS 2-108 © SAMSUNG Electronics Co., Ltd.
Page 147: Mobex Info
OfficeServ 7000 Series Call Server Programming Manual [328] MOBEX INFO The system shall have virtual stations to serve the MOBEX function. This virtual station is called a MOBEX station. A MOBEX station shall be mapped to a MOBEX phone in a one- to-one relationship.
Page 148 4) Press the Transfer button to complete the procedure or press the Speaker button to store the data. RELATED ITEMS Program 857 Set virtual cabinet of MOBEX station Program 724 Set number plan of MOBEX station Program 329 Set ring group 2-110 © SAMSUNG Electronics Co., Ltd.
Page 149: Ring Group
OfficeServ 7000 Series Call Server Programming Manual [329] RING GROUP Up to five stations shall be able to be assigned to a ring group. When a master station is ringing, the member stations of its ring group shall also be ringing simultaneously.
Page 150: Emergency Local Routing
5) Press the Transfer button to complete the procedure or press the Speaker button to store the data. RELATED ITEMS Program 701 LCR DIGIT Program 832 VoIP ACCESS CODE Program 833 VOIP IP ADDR 2-112 © SAMSUNG Electronics Co., Ltd.
Page 151: Customer On/Off Per Trunk
OfficeServ 7000 Series Call Server Programming Manual [400] CUSTOMER ON/OFF PER TRUNK Assigns several options (listed below) on a per-trunk basis. Option Default Description 1A2 EMULATION When this option is set to ON up to 4 internal stations can participate in a conversation on this trunk by pressing the trunk key.
Page 152 Press Volume button to select ON/OFF and press Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-114 © SAMSUNG Electronics Co., Ltd.
Page 153: Trunk Line/Pbx Line
OfficeServ 7000 Series Call Server Programming Manual [401] TRUNK LINE/PBX LINE Used to select the mode of the trunk lines: CO LINE or PBX (Private Branch eXchange) LINE. If PBX mode is chosen, this allows PBX access codes to be recognized, thus allowing more complete toll restriction.
Page 154: Trunk Dial Type
Press Right Soft buttons to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 501 SYSTEM TIMERS MMC 503 TRUNK-WIDE TIMERS 2-116 © SAMSUNG Electronics Co., Ltd.
Page 155: Trunk Toll Class
OfficeServ 7000 Series Call Server Programming Manual [403] TRUNK TOLL CLASS Assigns to ll class level assignments on a per-trunk or all-trunk basis in a day or night condition. The options for toll level will follow either the station class or the class of service defined in MMCs 702, Toll Deny Table, and 703, Toll Allowance Table.
Page 156 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 301 ASSIGN STATION COS MMC 507 ASSIGN RING PLAN TIME MMC 701 ASSIGN COS CONTENTS 2-118 © SAMSUNG Electronics Co., Ltd.
Page 157: Trunk Name
OfficeServ 7000 Series Call Server Programming Manual [404] TRUNK NAME Allows a name up to 11 characters long to be entered to identify an individual trunk. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. DEFAULT DATA NONE...
Page 158: Trunk Co Tel Number
[704] CO TEL NO. 3054264100 4) Press Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 404 TRUNK NAME 2-120 © SAMSUNG Electronics Co., Ltd.
Page 159: Trunk Ring Assignment
OfficeServ 7000 Series Call Server Programming Manual [406] TRUNK RING ASSIGNMENT Enables ringing to a specific station or to a group of stations when incoming calls are received. This MMC controls ring plan destinations for ring down trunks. If the ring plan destinations are not entered, the default ring plan is ring plan 1.
Page 160: Forced Trunk Release
3) Dial 1 for YES or 0 for NO. [704] TRK RELS. RELEASE?_Y:1,N:0 (Pressing 1 or 0 will return to step 2) 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-122 © SAMSUNG Electronics Co., Ltd.
Page 161: Assign Trunk Moh Source
OfficeServ 7000 Series Call Server Programming Manual [408] ASSIGN TRUNK MOH SOURCE Allows the system administrator to select which Music-On-Hold (MOH) source can be heard on each trunk. There is one internal music source (371) and maximum six external music sources are available with the MIS card installed in the 3 cabinet system (372~377).
Page 162: Trunk Status Read
3) Enter desired option 00-19. (e.g., 01) [704] TRK STATUS TYPE:LOOP TRUNK Press Volume button to make selection. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-124 © SAMSUNG Electronics Co., Ltd.
Page 163 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 400 CUSTOMER ON/OFF PER TRUNK MMC 401 TRUNK LINE/PBX LINE MMC 402 TRUNK DIAL TYPE MMC 403 TRUNK TOLL CLASS MMC 404 TRUNK NAME MMC 406 TRUNK RING ASSIGNMENT MMC 408...
Page 164: Assign Disa Trunk
Ring Plan. (e.g., 1 to select) Press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 500 SYSTEM-WIDE COUNTERS 2-126 © SAMSUNG Electronics Co., Ltd.
Page 165: Assign E1 Signal Type
OfficeServ 7000 Series Call Server Programming Manual [411] ASSIGN E1 SIGNAL TYPE Defines the type of Signaling for each E1 trunk assigned to the card. There are four kinds of trunk as detailed below. There are three types of Signaling associated with E&M and DID.
Page 166 TRUNK CO TEL NUMBER MMC 406 TRUNK RING ASSIGNMENT MMC 407 FORCED TRUNK RELEASE MMC 408 ASSIGN TRUNK MOH SOURCE MMC 409 TRUNK STATUS READ MMC 410 ASSIGN DISA TRUNK MMC 411 ASSIGN E1 SIGNAL TYPE 2-128 © SAMSUNG Electronics Co., Ltd.
Page 167 OfficeServ 7000 Series Call Server Programming Manual MMC 412 ASSIGN TRUNK SIGNAL MMC 413 VMS CALL TYPE MMC 414 MPD/PRS SIGNAL MMC 415 REPORT TRUNK ABANDON DATA MMC 416 ASSIGN E&M/DID RINGDOWN MMC 417 E1/PRI CRC4 OPTION MMC 418 BRI AND PRI CARD RESTART...
Page 168: Assign Trunk Signal
IMMEDIATE START DELAYED START WINK START NO ANSWER BACK DIRECT BACK CONDITIONS An analogue E&M/DID Trunk card must be installed in the OfficeServ 7000 Series system. Or, the ‘NO E&M/DID TRUNK’ message is displayed. DEFAULT DATA IMMEDIATE START ACTION DISPLAY 1) Press Transfer button and enter 412.
Page 169: Vms Call Type
OfficeServ 7000 Series Call Server Programming Manual [413] VMS CALL TYPE Defines the type of Signaling for voice mail assigned trunk. Type Description Default ANSWERING PHONE AUDIO TEX AUTO ATTENDANT VOICE MAIL CONDITIONS This program applies to the SVM-800 voice mail system which is no longer supplied or supported by Samsung.
Page 170: Mpd/Prs Signal
If the trunk is designated as PRS, the call duration timer will be started and the results printed on the SMDR (Station Message Detail Recording) record.  PRS is also essential for dropping a trunk-to- trunk conversation which is unsupervised by an internal party. DEFAULT DATA NONE (NORMAL) 2-132 © SAMSUNG Electronics Co., Ltd.
Page 171 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 414. [701] TRK PRS NONE Display shows: 2) Dial desired trunk number. (e.g., 705) [705] TRK PRS NONE Press Volume button to select trunk and use Right Soft button to move cursor.
Page 172: Report Trunk Abandon Data
Use Volume button to select option and press Right Soft button to return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 725 SMDR OPTIONS 2-134 © SAMSUNG Electronics Co., Ltd.
Page 173: Assign E&M/Did Ringdown
OfficeServ 7000 Series Call Server Programming Manual [416] ASSIGN E&M/DID RINGDOWN This MMC defines which ring destination table an E&M or DID trunk will follow for incoming calls. There are three options for each trunk as defined below. Option Description...
Page 174 4) Enter the number of incoming digits. [705] EM/DD RING NO. RCV DIGIT:00 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 714 DID NUMBER AND NAME TRANSLATION 2-136 © SAMSUNG Electronics Co., Ltd.
Page 175: E1/Pri Crc4 Option
OfficeServ 7000 Series Call Server Programming Manual [417] E1/PRI CRC4 OPTION This option is used to enable/disable CRC4 generation and checking. CONDITIONS  This is useful with some networks which do not support CRC4 framing but only PCM30 framing. ...
Page 176: Bri And Pri Card Restart
5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 419 BRI OPTIONS MMC 420 PRI OPTIONS MMC 423 S/T MODE MMC 424 BRI S0 MAPPING 2-138 © SAMSUNG Electronics Co., Ltd.
Page 177: Bri Options
OfficeServ 7000 Series Call Server Programming Manual [419] BRI OPTIONS Assigns several options on a per-BRI basis. There are different options depending on whether the BRI is programmed as a trunk or station in MMC 423. OPTIONS FOR BRI PORTS PROGRAMMED AS TRUNKS...
Page 178 CENTREX set to OFF and the 2nd progress message is incoming, dialed digit can be sent as ISDN message type. If the option is set to OFF, dialed digit is sent as DTMF type. 2-140 © SAMSUNG Electronics Co., Ltd.
Page 179 OfficeServ 7000 Series Call Server Programming Manual OPTIONS FOR BRI PORTS PROGRAMMED AS STATIONS Option Description ANY CHANNEL When this option is set to YES, the system will place calls on any free channel of that BRI if the channel chosen by the user is busy.
Page 180 7) Select option. [729] BRI-STN POWER FEED:YES Press Volume button to select option item and press Right Soft button. 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-142 © SAMSUNG Electronics Co., Ltd.
Page 181 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI AND PRI CARD RESTART MMC 421 MSN DIGIT MMC 423 S/T MODE MMC 714 DID NAME AND NUMBER TRANSLATION ©...
Page 182: Pri Options
Unknown numbering plan ISDN ISDN numbering plan (CCITT E.163-164) DATA Data numbering plan (CCITT X.121) TELEX Telex numbering plan (CCITT F.69) NATIONAL National standard numbering plan PRIVATE Private numbering plan EXTEN Local numbering plan 2-144 © SAMSUNG Electronics Co., Ltd.
Page 183 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description CLIR w NUMB When this option is set to ON, CLIP numbers are transmitted to the network even though CLIP Restriction is set. 0. OFF 1. ON ECT SERVICE Specifies the ISDN explicit call transfer option as follows: 0.
Page 184 Press Volume button to select option. 4) Press Volume button to make selection. [730] PRI OPTION PRI MODE:NORMAL Then press Right Soft button. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-146 © SAMSUNG Electronics Co., Ltd.
Page 185 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 323 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 418 BRI AND PRI CARD RESTART MMC 714 DID NAME AND NUMBER TRANSLATION © SAMSUNG Electronics Co., Ltd. 2-147...
Page 186: Msn Digit
Right Soft button to move cursor. 4) Enter digits to be translated (e.g., 4603881) via dial [704] MSN DGT (4) DGT:4603881 keypad and press Right Soft button to move to the destination selection. (Max. Digit is 12) 2-148 © SAMSUNG Electronics Co., Ltd.
Page 187 OfficeServ 7000 Series Call Server Programming Manual 5) Enter destinations for the six ring plans via the dial [704] MSN DGT (4) 1:204 2:NONE keypad. (e.g., 204 for ring plan 1) Press Volume button to make selection and press Right Soft button.
Page 188: Trunk Cos
Use Volume button to scroll through classes of service and press Right Soft button to return to step Use Volume button to scroll through classes of service and press Left Soft button to return to the previous step. 2-150 © SAMSUNG Electronics Co., Ltd.
Page 189 OfficeServ 7000 Series Call Server Programming Manual 5) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS MMC 701 ASSIGN COS CONTENTS © SAMSUNG Electronics Co., Ltd. 2-151...
Page 190: S/T Mode
4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 424 BRI S0 MAPPING MMC 418 BRI AND PRI CARD RESTART MMC 419 BRI OPTIONS MMC 421 MSN DIGIT 2-152 © SAMSUNG Electronics Co., Ltd.
Page 191: Bri S0 Mapping
OfficeServ 7000 Series Call Server Programming Manual [424] BRI S0 MAPPING This MMC assigns an ISDN terminal number to a BRI station port. CONDITIONS This function can be used only when the BRI card or BRM is installed in the system.
Page 192: Cid Trunks
RELATED ITEMS Program 119 Specify the way to display CID. Program 312 Specify if the CID is allowed. Program 608 Assign the block to save CID. Program 728 Enter the CID Conversion Table. 2-154 © SAMSUNG Electronics Co., Ltd.
Page 193: Trunk Gain Control
OfficeServ 7000 Series Call Server Programming Manual [426] TRUNK GAIN CONTROL Allows loss levels to be adjusted on a per-trunk basis. There are two adjustments available in this MMC: ‘TX’ is the transmit level adjustment of the trunk to the station. ‘RX’ is the receive level adjustment of the station to the trunk.
Page 194 [701] TRUNK TSW RX:+0.0 TX:-2.5 Right Soft button to move cursor and return to step 1. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-156 © SAMSUNG Electronics Co., Ltd.
Page 195: Assign Trunk/Trunk Use
OfficeServ 7000 Series Call Server Programming Manual [428] ASSIGN TRUNK/TRUNK USE This MMC is used to allow or restrict trunks from making outgoing calls to other trunks within the same system. By default (DIAL=YES) all trunks can use other trunks.
Page 196: Set H-Trk
3) Press Volume button to select trunk type and press [705] SET H-TRK Right Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-158 © SAMSUNG Electronics Co., Ltd.
Page 197: Cost Rate
OfficeServ 7000 Series Call Server Programming Manual [433] COST RATE In this MMC, the TRUNK COST RATE flags are entered for each trunk. DIAL PLANs are defined in MMC 746 (Costing Dial Plan). RATE CALCULATION TABLES are defined in MMC 749. Each trunk may be defined with up to eight cost rates. Enter one or more of the eight COST RATES per trunk.
Page 198: Connection Status
1) Press Transfer button and enter 434. DISPLAY STATUS 201 IDLE 2) Enter station or trunk number. DISPLAY STATUS 235 715 Display show connection status. 3) Enter another station or trunk. DISPLAY STATUS 235 715 Press Transfer button to exit. 2-160 © SAMSUNG Electronics Co., Ltd.
Page 199 OfficeServ 7000 Series Call Server Programming Manual Display trunk status in conference 1) Press Transfer button and enter 434. DISPLAY STATUS 201 IDLE 2) Enter station or trunk number. DISPLAY STATUS 702 227 ,215  Display shows connection status: 3) Press Right Soft button to display the next station or DISPLAY STATUS ...
Page 200 725 MADE BUSY Display show connection status: 3) Enter another station or trunk. DISPLAY STATUS 725 MADE BUSY Press Transfer button to exit. RELATED ITEMS MMC 108 STATION STATUS MMC 409 TRUNK STATUS READ 2-162 © SAMSUNG Electronics Co., Ltd.
Page 201: Trunk Tmc Gain
OfficeServ 7000 Series Call Server Programming Manual [436] TRUNK TMC GAIN Allows loss levels of TMC (Trunk Module Controller) for analogue trunks to be adjusted on a per-trunk basis. There are two adjustments available in this MMC: ‘TX’ is the transmit level adjustment of the trunk to the station.
Page 202: Trunk Gain
Right Soft button. 6) Press the Transfer button to store the data and [702] TRK TYPE:2 RX:2 TX:4 complete the procedure or press the Speaker button to store the data. 2-164 © SAMSUNG Electronics Co., Ltd.
Page 203: System-Wide Counters
OfficeServ 7000 Series Call Server Programming Manual [500] SYSTEM-WIDE COUNTERS Used to set the values of the system counters. The counters are listed below with a brief description of each. Counter Default Description ALARM REM. The number of times that an alarm reminder will ring a CNTER station before cancelling.
Page 204 UCDS AUDIO ALARM 00  02 If entry is valid, system will return to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-166 © SAMSUNG Electronics Co., Ltd.
Page 205: System Timers
OfficeServ 7000 Series Call Server Programming Manual [501] SYSTEM TIMERS Allows the technician to adjust individual timers as necessary. TIMER TABLE Timer Name Default Range Unit Description AA INT DGT TIME 1~25 SEC Inter-digit time (This option may not be available in certain OfficeServ models.)
Page 206 This timer determines when a DISA call is disconnected by force when a called party does not answer. DISA PASS CHECK 1-250 MIN This timer defines the period before the system clears the incorrect passcode counter. 2-168 © SAMSUNG Electronics Co., Ltd.
Page 207 OfficeServ 7000 Series Call Server Programming Manual (Continued) Timer Name Default Range Unit Description DISA NO ACTION 0-250 SEC This timer controls how long a DISA line will wait for further action from the caller. DISPLAY DELAY TM 1-250 SEC...
Page 208 POWER DOWN TIME 2000 500-9900 This timer monitors the power to the ROM MSEC pack to begin shutdown status. RECALL 1-250 MIN This is the time an attendant recall will ring DISCONNECT before being disconnected. 2-170 © SAMSUNG Electronics Co., Ltd.
Page 209 OfficeServ 7000 Series Call Server Programming Manual (Continued) Timer Name Default Range Unit Description RECALL WAIT TIME 0-250 SEC This is the time any recall (hold or transfer) continues to recall at your station before it recalls to the operator.
Page 210 3) Enter new value using keypad; if valid, system KMMC LOCK OUT TM 060 SEC250 returns to step 2 with new value. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-172 © SAMSUNG Electronics Co., Ltd.
Page 211: Station-Wide Timers
OfficeServ 7000 Series Call Server Programming Manual [502] STATION-WIDE TIMERS Allows certain station timer values to be changed on a per-station basis or for all stations. Item Description NO ANS FWD This timer controls how long the station will ring before Forward on No Answer takes place.
Page 212 0200) System returns to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 102 CALL FORWARD MMC 306 HOT LINE/OFF HOOK SELECTION 2-174 © SAMSUNG Electronics Co., Ltd.
Page 213: Trunk-Wide Timers
OfficeServ 7000 Series Call Server Programming Manual [503] TRUNK-WIDE TIMERS Allows certain trunk timer values to be changed on a per-trunk basis or for all trunks. Item Description Range ANS.BAK TM ANSWER BACK TIME. This timer is used for certain 0-2500 MSEC types of E&M Signaling and does not affect normal...
Page 214 4) Enter new timer value. (must be four digits, e.g., [704] DTMF DUR. 0100 MS  0200 0200) System returns to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-176 © SAMSUNG Electronics Co., Ltd.
Page 215: Pulse Make/Break Ratio
OfficeServ 7000 Series Call Server Programming Manual [504] PULSE MAKE/BREAK RATIO Allows the ability to change the value of pulses per second and the duration of the make/break time. This will only affect rotary dial trunks. Item Description MAKE/BREAK RATIO...
Page 216: Assign Date And Time
3) Verify time and date. OLD:0111121:1445 NEW:YYMMDDW:HHMM Re-enter if necessary. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 861 SYSTEM OPTIONS (AUTO UPDATE TIME) 2-178 © SAMSUNG Electronics Co., Ltd.
Page 217: Tone Cadence
OfficeServ 7000 Series Call Server Programming Manual [506] TONE CADENCE Provides the ability to customize the tone cadence on a system-wide basis. The system provides 11 types of tone and three types of tone provided from Central Office or a PBX system can be detected.
Page 218 3) Dial tone option 0 for CONTINUOUS or 1 for TRANSFER TONE INTERRUPT. INTERRUPT TONE Press Volume button to select tone control and press Right Soft button to advance step 4. Press Left Soft button to return to step 2. 2-180 © SAMSUNG Electronics Co., Ltd.
Page 219 OfficeServ 7000 Series Call Server Programming Manual 4) Dial new value for interrupt times. TRANSFER TONE:0100 (must be four digits) 9900 0100 9900 Press Right Soft button advances cursor and press Left Soft button retreats cursor. If valid entry, system returns to step 2.
Page 220: Assign Ring Plan Time
Ring Plan with a time that extends past the expired Ring Plan time. CONDITIONS  When using a Samsung built-in Voice Mail card that only has day/night mode, the day/night must be set for each RING PLAN in MMC 758, VM DAY/NIGHT. ...
Page 221 OfficeServ 7000 Series Call Server Programming Manual Ring Plan 1 Ring Plan 1 is the default Ring Plan for each day. If no Ring Plan destination is entered, the operator group is the default destination. DEFAULT DATA START: NONE END: NONE...
Page 222: Call Cost
CALL COST RATE 110 %  System returns to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 110 STATION ON/OFF (CALL COST OPTION) 2-184 © SAMSUNG Electronics Co., Ltd.
Page 223: Sli Ring Cadence
OfficeServ 7000 Series Call Server Programming Manual [510] SLI RING CADENCE Provides the ability to customize the ring cadence for single line ports on a system-wide basis. There are five cadences available. When changing the MMC [510] MMC [510] should not be changed from the default levels without the assistance of the local SAMSUNG distributor.
Page 224 CHAPTER 2. MMC Programming 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-186 © SAMSUNG Electronics Co., Ltd.
Page 225: Msg Waiting Lamp Cadence
OfficeServ 7000 Series Call Server Programming Manual [511] MSG WAITING LAMP CADENCE This MMC defines the cadence (flash rate) of single line telephone message waiting lamps on phones connected to systems with an MWSLI card. There are two choices for the MW lamp cadence: continuous and interrupted.
Page 226: Holiday Assignment
5) Press Volume button to select Ring mode and press :MM/DD:RP:VM 02:08/09:1:99 Right Soft button enter and advance cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 507 ASSIGN RING PLAN TIME 2-188 © SAMSUNG Electronics Co., Ltd.
Page 227: Hotel Timer
OfficeServ 7000 Series Call Server Programming Manual [513] HOTEL TIMER This MMC is where the Hotel timers for guest-rooms are set. These are system-wide timers that affect all rooms. Refer to your Hotel documentation for more details. Item Description If a room is occupied after the checkout time, an additional day’s CHECK OUT TIME room charge will be automatically added to the room bill.
Page 228: Tone Source
Press Volume button to select tone number and press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to save and advance to next MMC. RELATED ITEMS NONE 2-190 © SAMSUNG Electronics Co., Ltd.
Page 229: Daylight Assignment
OfficeServ 7000 Series Call Server Programming Manual [515] DAYLIGHT ASSIGNMENT Defines up to 10 summertime periods. The system time will automatically increase by an hour at 2 a.m. on the assigned Start date and will automatically decrease by an hour at 3 a.m.
Page 230: Assign Operator Group
Press Volume button to select group and press Right Soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 601 ASSIGN STATION GROUP 2-192 © SAMSUNG Electronics Co., Ltd.
Page 231: Assign Station Group
OfficeServ 7000 Series Call Server Programming Manual [601] ASSIGN STATION GROUP This MMC is used to build all station groups. There are 40 programmable groups available. The options for setting up these groups are as follows: Option Description TYPE This is the type of group you are creating and can be one of the following: 0 NORMAL: Used to assign stations in a ring group.
Page 232 MMC 300. This ring mode option is not available for UCD or VMAA groups. The SGR INC BUSY option is not available for unconditional ring mode. 2-194 © SAMSUNG Electronics Co., Ltd.
Page 233 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description OVERFLOW This is the timer value that will cause unanswered calls to a group to begin also ringing the NEXT PORT (see below) after this timer has elapsed. If set to 000, no overflow will take place.
Page 234 6) Dial ring option. (0-2, e.g., 0) [505] STN GROUP RING:SEQUENTIAL Press Volume button to make selection. Press Left Soft button to move cursor back to RING or press Right Soft button to return to step 2. 2-196 © SAMSUNG Electronics Co., Ltd.
Page 235 OfficeServ 7000 Series Call Server Programming Manual 7) Dial next feature option and continue. [505] STN GROUP RING:SEQUENTIAL Press Volume button to select option and press Right Soft button. Press Left Soft button to return to step 2. 8) Press Transfer button to save and exit.
Page 236: Station Group Name
4) Press Left or Right Soft button to return to step 2. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 104 STATION NAME MMC 404 TRUNK NAME MMC 601 ASSIGN STATION GROUP 2-198 © SAMSUNG Electronics Co., Ltd.
Page 237: Assign Trunk Group
OfficeServ 7000 Series Call Server Programming Manual [603] ASSIGN TRUNK GROUP Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is useful in the programming of LCR when more than one trunk is to be in several dialing plans.
Page 238 Right Soft button to return to step 2. 7) Repeat steps 1-5 to remove trunk from group 9 if necessary. 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-200 © SAMSUNG Electronics Co., Ltd.
Page 239 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS LCR PROGRAMMING MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE MMC 712 LCR ROUTE TABLE MMC 713 LCR MODIFY DIGIT TABLE VoIP PROGRAMMING MMC 832 VoI P ACCESS CODE...
Page 240: Assign Station To
MEMBER 05:205 Press Volume button to make selection and press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-202 © SAMSUNG Electronics Co., Ltd.
Page 241: Assign External
OfficeServ 7000 Series Call Server Programming Manual [605] ASSIGN EXTERNAL PAGE ZONE Determines which relays will close when one of the four external page zones is accessed. Using a MIS daughterboard The OfficeServ 7200/7400 system should be equipped with a MIS daughterboard to allow external paging.
Page 242: Assign Speed Block
(e.g., 0-5 for EXT or 00-50 for SYSTEM) Press Volume button to make selection. Press Hold button to delete bin (s). 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-204 © SAMSUNG Electronics Co., Ltd.
Page 243 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 105 STATION SPEED DIAL MMC 106 STATION SPEED DIAL NAME MMC 705 ASSIGN SYSTEM SPEED DIAL MMC 706 SYSTEM SPEED DIAL BY NAME © SAMSUNG Electronics Co., Ltd. 2-205...
Page 244: Ucd Options
UCD message, be placed on hold, hear the second UCD message, be placed on hold, and finally hear the second message again before being transferred to the final destination. 2-206 © SAMSUNG Electronics Co., Ltd.
Page 245 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description FINAL DESTINATION This is the final destination for the caller if not answered by a UCD agent. This destination is only reached if (a) the caller dials an exit digit during a message or (b) the retry count has expired.
Page 246 FINAL DEST: 500 RING NEXT: 30 SEC UCD RECALL: 10 SEC MOH SOURCE: NONE WRAP-UP: 10 SEC AUTO LOG OUT: ON ALL OUT TO FINAL: OFF AGENT PIN NO: OFF GROUP BUSY NEXT: OFF 2-208 © SAMSUNG Electronics Co., Ltd.
Page 247 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 607. [530] UCD OPTION FIRST MSG :61 Display shows: 2) Press Volume button to select UCD group or dial [542] UCD OPTION FIRST MSG :61 group number.
Page 248: Assign Review Block
Press Hold button to delete bin (s). 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 119 CALLER ID DISPLAY MMC 312 ALLOW CALLER ID MMC 725 SMDR OPTIONS 2-210 © SAMSUNG Electronics Co., Ltd.
Page 249: Call Log Block
OfficeServ 7000 Series Call Server Programming Manual [609] CALL LOG BLOCK Provides a means of adding or deleting Call Log blocks for an individual phone. With the ability to delete blocks it will not be necessary to waste these on items such as voice mail and DPIMs or phones that do not have displays.
Page 250: Allow Text Messaging
3) Specify whether text messaging will be used or not. [202] TMSG STN USED 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 117 EDIT TEXT MESSAGE 2-212 © SAMSUNG Electronics Co., Ltd.
Page 251: Allow Group Conference
OfficeServ 7000 Series Call Server Programming Manual [612] ALLOW GROUP CONFERENCE This program allows a station to use the Group Conference call feature. Each allowed station can have up to five pre-programmed conference groups. CONDITIONS This feature is only for Large LCD phones. (e.g., ITP-5012L, DS-5012L, WIP-5000M) DEFAULT DATA Large LCD phones are automatically set to allow this feature.
Page 252: Station/Trunk Use Group
Right Soft button to advance cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 304 ASSIGN EXTENSION/TRUNK USE MMC 317 ASSIGN STATION/STATION USE MMC 428 ASSIGN TRUNK/TRUNK USE 2-214 © SAMSUNG Electronics Co., Ltd.
Page 253: Mgi Group
IP network. PUB IP NTWK This determines what MGI ports can be used for enhanced proprietary Samsung VoIP networking between OfficeServ 7000 Series systems on a public IP network. VOIP TRUNK This determines what MGI ports can be used as industry-standard H.323 or SIP VoIP trunks for communications across a private network...
Page 254 4) Press Volume button to select and press Right Soft USER: LOCAL ITP MODE:SEQUENTIAL button to store data and return to step 1. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-216 © SAMSUNG Electronics Co., Ltd.
Page 255: Mgi User
OfficeServ 7000 Series Call Server Programming Manual [616] MGI USER This program selects which specific MGI ports will be dedicated on a per-port basis for IP station/trunk devices. If this MMC is not used, allocation of MGI ports will be controlled by MMC 615.
Page 256: Copy Cos Contents
4) Press F key to advance MMC 701 and press Right COS CONTENTS (06) TOLL LEVEL:A Soft to advance cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 701 ASSIGN COS CONTENTS 2-218 © SAMSUNG Electronics Co., Ltd.
Page 257: Assign Cos Contents
OfficeServ 7000 Series Call Server Programming Manual [701] ASSIGN COS CONTENTS Similar to MMC 700 but does not allow a copy command. This MMC is primarily used for creating a new COS. If the unsupervised conference feature is allowed, a programmed CONF key must be available to allow re-entry into a conference call.
Page 258 Page zone 4 Paging PAGE 5 Page zone 5 Paging PAGE 6 Page zone 6 Paging PAGE 7 Page zone 7 Paging PAGE 8 Page zone 8 Paging PAGE 9 Page zone 9 Paging 2-220 © SAMSUNG Electronics Co., Ltd.
Page 259 OfficeServ 7000 Series Call Server Programming Manual (Continued) Category Description USABLE FEATURE Default Description PAGE * Page zone * Paging PICKUP Call pickup Privacy Release and Bridge REM. HOLD Remote Hold RNG PLAN Ring Mode Change SECURE Barge-In secure SET RLOC...
Page 260 Press Volume button to select option and press Right Soft button to return to step 4. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 700 COPY COS CONTENTS 2-222 © SAMSUNG Electronics Co., Ltd.
Page 261: Toll Deny Table
OfficeServ 7000 Series Call Server Programming Manual [702] TOLL DENY TABLE Provides a way to make toll restriction (call barring) very easy and flexible. There are 500 entries allowed in the deny table and each entry index can be assigned to a class of service.
Page 262 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 703 TOLL ALLOWANCE TABLE MMC 704 ASSIGN WILD CHARACTER 2-224 © SAMSUNG Electronics Co., Ltd.
Page 263: Toll Allowance Table
OfficeServ 7000 Series Call Server Programming Manual [703] TOLL ALLOWANCE TABLE Provides a way to make toll restriction very easy and flexible. There are 500 allowable entries and each entry index can be assigned to a class of service. Each index can have up to 12 digits.
Page 264 CHAPTER 2. MMC Programming RELATED ITEMS MMC 702 TOLL DENY TABLE MMC 704 ASSIGN WILD CHARACTER 2-226 © SAMSUNG Electronics Co., Ltd.
Page 265: Assign Wild Character
OfficeServ 7000 Series Call Server Programming Manual [704] ASSIGN WILD CHARACTER Provides flexibility to toll restriction (call barring) when a specific numbering plan is desired. There are only three entry tables but more than one digit can be assigned per table if needed.
Page 266: Assign System Speed Dial
24 digits (digits will scroll under) and press Right Soft button to return to step 2. 4) Press F key to toggle to MMC 706 step 3 to enter SYS SPEED NAME 505: name. 2-228 © SAMSUNG Electronics Co., Ltd.
Page 267 OfficeServ 7000 Series Call Server Programming Manual 5) If you want to save the speed dial number and name SYS SPEED DIAL ADD CLI XLT ?NO to the CID translation table. (MMC 728) Press the ANS/RLS button and dial 1 for YES.
Page 268: System Speed Dial By Name
Press ANS/RLS button and dial 1 for YES. (The speed dial number must exist) 5) Press Right Soft button to return to step 2 above. Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-230 © SAMSUNG Electronics Co., Ltd.
Page 269 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 606 ASSIGN SPEED BLOCK MMC 705 ASSIGN SYSTEM SPEED DIAL © SAMSUNG Electronics Co., Ltd. 2-231...
Page 270: Authorization Code
Soft button to select and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 305 ASSIGN FORCED CODE MMC 701 ASSIGN COS CONTENTS 2-232 © SAMSUNG Electronics Co., Ltd.
Page 271: Account Code
OfficeServ 7000 Series Call Server Programming Manual [708] ACCOUNT CODE Enables the account code entry feature. There are 999 available entries. DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and enter 708. ACCOUNT CODE 001: Display shows: 2) Dial code index number. (e.g., 005)
Page 272: Toll Pass Code/Special Code Table
Press Volume button to make selection and press Right Soft button to move cursor. 3) Enter index number. (e.g., 3) TOLL OVERRIDE Press Volume button to make selection and press Right Soft button to move cursor. 2-234 © SAMSUNG Electronics Co., Ltd.
Page 273 OfficeServ 7000 Series Call Server Programming Manual 4) Enter via dial keypad the desired access/feature code. TOLL OVERRIDE 3:911 (e.g., 911) Press Right Soft button to enter and return to step 3 and enter more entries. 5) Press Transfer button to save and exit.
Page 274: Lcr Digit Table
LCR DIGIT (0005) LENGTH:10 RT:01 Valid entry will return you to step 1. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 712 LCR ROUTE TABLE 2-236 © SAMSUNG Electronics Co., Ltd.
Page 275: Lcr Time Table
OfficeServ 7000 Series Call Server Programming Manual [711] LCR TIME TABLE This table, through the LCR ROUTES, allows calls placed at any given time of day to use the least cost trunk route that is available. When LCR ROUTE ADVANCE is allowed, it is possible for calls to be placed on more expensive trunks on any given time of day.
Page 276: Lcr Route Table
Soft button to move cursor. 5) Dial TRUNK GROUP access code. (e.g., 801) LCR ROUTE (05:2) C:4 G:801 M:--- Press Volume button to selected access code and press Right Soft button to move cursor. 2-238 © SAMSUNG Electronics Co., Ltd.
Page 277 OfficeServ 7000 Series Call Server Programming Manual 6) Dial MODIFY DIGITS index number. (e.g., 050) LCR ROUTE (05:2) C:4 G:801 M:050 Press Volume button to selected index number and press Right Soft button to move cursor. LCR ROUTE (05:2) C:4 G:801 M:--- Press Right Soft button to skip step and move cursor to step 2.
Page 278: Lcr Modify Digit Table
Press Right Soft button to skip step or to store information and advance to next step. 5) Enter digits to be appended. (e.g., 45678) LCR MODIFY (005) Press Right Soft button to skip step or to store information and return to step 2. 2-240 © SAMSUNG Electronics Co., Ltd.
Page 279 OfficeServ 7000 Series Call Server Programming Manual 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 310 LCR CLASS OF SERVICE MMC 710 LCR DIGIT TABLE MMC 711 LCR TIME TABLE...
Page 280: Did Number And Name Translation
Enter up to 11 characters to identify call. Refer to MMC 104, STATION NAME, for how to enter the name. TONE Assigns ring tone to DLI port. CADENCE Assigns ring cadence to SLT port. 2-242 © SAMSUNG Electronics Co., Ltd.
Page 281 OfficeServ 7000 Series Call Server Programming Manual CONDITIONS If an E&M line is designated as FOLLOW DID TRANS in MMC 416 (ASSIGN E & M/ DID RINGDOWN), calls are terminated according to the station direct dial translation table in MMC 714, DID NUMBER AND NAME TRANSLATION.
Page 282 Soft button to return to Step 1. 11) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS TRUNK PROGRAMMING Refer to RELATED ITEMS in MMC 411, ASSIGN E1 SIGNAL TYPE. 2-244 © SAMSUNG Electronics Co., Ltd.
Page 283: Programmed Station Message
OfficeServ 7000 Series Call Server Programming Manual [715] PROGRAMMED STATION MESSAGE Allows custom messages to be programmed or default messages to be changed. ENTERING CHARACTERS Refer to ENTERING CHARACTERS in MMC 104, STATION NAME. There are 15 messages in the system: MESSAGES 01-10 are 16-character pre-programmed default messages.
Page 284: Uk Lcr Option
3) Enter number 0-16. NETWORK CODE 02:_ USE:NONE Press Volume buttons to select number and press Right Soft button to move cursor. 4) Enter network access code via dial keypad. NETWORK CODE 02:1234 USE:NONE 2-246 © SAMSUNG Electronics Co., Ltd.
Page 285 OfficeServ 7000 Series Call Server Programming Manual 5) Enter use option number. (0-3) NETWORK CODE 02:1234 USE:CCC Press Volume button to make selection and press Right Soft button to save and return to step 3. 6) Press Transfer button to save and exit.
Page 286: Ucd Agent Id
Soft button to select and return to step 2. Select all groups. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 607 UCD OPTIONS 2-248 © SAMSUNG Electronics Co., Ltd.
Page 287: My Area Code
OfficeServ 7000 Series Call Server Programming Manual [718] MY AREA CODE This MMC defines the home area code and country code. This information is used for caller ID and ISDN calls in defining the area code on incoming calls. This MMC removes the local area code to allow callback without digit modifications in LCR.
Page 288: Idle Display
WELCOME TO ABC Soft button to save and move to step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 120 LARGE LCD OPTIONS 2-250 © SAMSUNG Electronics Co., Ltd.
Page 289: Copy Key Programming
OfficeServ 7000 Series Call Server Programming Manual [720] COPY KEY PROGRAMMING Provides a tool for duplicating key assignments from one phone to another. This can be done on a per-station basis or on all stations, but not on a group of stations. A limitation is that the original and target phones must be of the same type.
Page 290: Save Station Key Programming
2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 107 KEY EXTENDER MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING 2-252 © SAMSUNG Electronics Co., Ltd.
Page 291: Station Key Programming
OfficeServ 7000 Series Call Server Programming Manual [722] STATION KEY PROGRAMMING Allows the customizing of programmable buttons on specific phones and add-on modules (AOMs). For phones, buttons 1 and 2 are set as CALL buttons by default. For AOMs, all buttons are set as DS keys by default. Features are selected by pressing the dial keypad buttons the required number of times.
Page 292 ESTABLISHED CALL PICKUP EXTMIC EXTERNAL MIC FAUTO FORCED AUTO ANSWER FLASH FLASH FWRD CALL FORWARD GPIK GROUP PICKUP HDSET HEADSET MODE HLDPK HOLD PICKUP HOLD HOLD HOTEL HOTEL (Hotel Feature) ICONF ISDN 3 PTY CONFERENCE 2-254 © SAMSUNG Electronics Co., Ltd.
Page 293 OfficeServ 7000 Series Call Server Programming Manual (Continued) Feature Description IDISC ISDN 3 PTY DISCONNECTION IN/OUT GROUP IHOLD ISDN 3-PARTY HOLD INFDSP INFORMATION DISPLAY (Requires News/Call Plus) INQIRE INQUIRE IRET ISDN 3 PTY RETRIEVE ISPY CID SPY LEAST COST ROUTING...
Page 294 VMS GROUP MESSAGE (Requires SVM-800) (This option may not be available in certain OfficeServ models.) VOICE MAIL MEMO (Requires SVMi card) VMADM VOICE MAIL ADMINISTRATION (Requires SVMi card) VMAME ANSWER MACHINE EMULATION (Requires SVMi card) 2-256 © SAMSUNG Electronics Co., Ltd.
Page 295 OfficeServ 7000 Series Call Server Programming Manual (Continued) Feature Description VMMSG VOICE MAIL MESSAGE KEY (Requires SVMi card) VMSCMT VMS COMMENT (Requires SVM) (This option may not be available in certain OfficeServ models.) VMSMSG VMS MESSAGE (Requires SVM) (This option may not be available in certain OfficeServ models.)
Page 296 Right Soft button to return to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 107 KEY EXTENDER MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING 2-258 © SAMSUNG Electronics Co., Ltd.
Page 297: System Key Programming
OfficeServ 7000 Series Call Server Programming Manual [723] SYSTEM KEY PROGRAMMING This MMC is similar to MMC 722, Station Key Programming, except that changes are made system-wide rather than on a per-station basis. Features are entered via the dial keypad by pressing numbers as shown in the table.
Page 298 Right Soft button to return to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 107 KEY EXTENDER MMC 720 COPY KEY PROGRAMMING MMC 721 SAVE STATION KEY PROGRAMMING 2-260 © SAMSUNG Electronics Co., Ltd.
Page 299: Dial Numbering Plan
Please remember that this program is system-wide. NETWORK NUMBER This is where additional LCR access codes are entered if two or more OfficeServ 7000 Series systems are networked together. - LCR-xx: This codes will be translated by NTWK LCR DGT table in MMC824...
Page 300 CHECK OUT (Hotel Feature) CHOICE NONE CHOICE (Related to News Server) CONF CONFERENCE CONP NONE CONNECTED NAME DISPLAY NONE CALL RECORD (Requires SVMi card) CREDIT NONE CREDIT (Hotel Feature) DGPALM NONE EASY ALARM SET TO REMOTE STATION 2-262 © SAMSUNG Electronics Co., Ltd.
Page 301 OfficeServ 7000 Series Call Server Programming Manual (Continued) Feature Default Description DICT NONE DICTATION NONE DIRECTORY DIRPK DIRECT PICKUP DISALM DISA ALARM CLEAR DIVERT NONE EXECUTIVE CALL DIVERT TO SECRETARY DLOCK DOOR UNLOCK DO NOT DISTURB DNDO NONE DO NOT DISTURB OVERRIDE...
Page 302 SET RELOCATION SSET NONE ISDN SUPPLEMENTARY SERVICE SET STATE NONE SET EXECUTIVE STATE TCLIP NONE Specify to Differently Send CID Calls Depending on the Type of Calls (Temporary CLIP) NONE TERMINAL PORTABILIY UNIVERSAL ANSWER 2-264 © SAMSUNG Electronics Co., Ltd.
Page 303 OfficeServ 7000 Series Call Server Programming Manual (Continued) Feature Default Description VMADM NONE VOICE MAIL ADMINISTRATION (Requires SVMi card) VMAME NONE ANSWER MACHINE EMULATION (Requires SVMi card) VMMEMO NONE VOICE MAIL MEMO (Requires SVMi card) VMMSG NONE VOICE MAIL MESSAGE KEY (Requires SVMi card)
Page 304 1 for YES for change or enter 0 for NO for no change. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS ALL MMCs 2-266 © SAMSUNG Electronics Co., Ltd.
Page 305: Smdr Options
OfficeServ 7000 Series Call Server Programming Manual [725] SMDR OPTIONS Allows the system administrator to select the information printed on the SMDR report. The following options may be selected: Option Default Description PAGE HEADER This option determines whether a page header will print at the top of each page.
Page 306: Entering Characters
SMDR. Even though the called party doesn’t answer, the SMDR record (‘IR’) will print. ENTERING CHARACTERS Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME. DEFAULT DATA SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY 2-268 © SAMSUNG Electronics Co., Ltd.
Page 307 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 725. PAGE HEADER PRINT: YES Display shows: 2) Dial the option number. (e.g., 01) LINE PER PAGE 60 LINE/PAGE Use the Volume buttons to scroll through the options and press Right Soft button to select an option.
Page 308: Vm/Aa Options
VMAA port. If set to no, when the voice mail auto attendant system answers a call the system will not send station data in the DN2 field. 2-270 © SAMSUNG Electronics Co., Ltd.
Page 309 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description Default TRUNK FOR DN2 If set to yes, when the voice mail auto attendant system answers a call the system will send data in the DN2 field indicating the originating trunk of the call ringing the VMAA port.
Page 310 5) When a VM/AA port calls a station that is in the AUTO ANSWER or VOICE ANNOUNCE mode, the phone will be forced to ring. 6) All calls to a VM/AA port or group ring with Trunk line ringing cadence, not intercom ring cadence. 2-272 © SAMSUNG Electronics Co., Ltd.
Page 311 OfficeServ 7000 Series Call Server Programming Manual EXAMPLES OF VM/AA OPERATION (IN-BAND DTMF DIGIT STRING) In the following example, all call and type data is turned on unless otherwise stated. X is the separator digit, all-default values are used in these examples and [ ] is not used.
Page 312: Program Buttons
] + [ ] (Nothing is sent) DEFAULT DATA SEE DESCRIPTION SOME OPTIONS DEPEND ON COUNTRY PROGRAM BUTTONS Used to insert alpha character ‘A’ Used to insert alpha character ‘B’ Used to insert alpha character ‘C’ 2-274 © SAMSUNG Electronics Co., Ltd.
Page 313 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 726. EXT FOR DN1 Display shows: 2) Enter the OPTION number from the above list. TRK FOR DN2 (e.g., 3) Press Volume button to make selection and press Right Soft button to move cursor.
Page 314: System Version Display
Cabinet and Slot shown: SLI CARD C2-S3:16 SLI NO VERSION DATA Cabinet and Slot shown: 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-276 © SAMSUNG Electronics Co., Ltd.
Page 315: Cid Translation Table
OfficeServ 7000 Series Call Server Programming Manual [728] CID TRANSLATION TABLE Allows the system administrator or technician to associate a CID number received from the central office with a name programmed in this translation table. If there is no match between a received number and a name in this table, ‘no CID name’...
Page 316: Aa Message
Austria ITALIAN Italy PORTUGUESE Portugal RUSSIAN Russia SPANISH/SPAIN Spain SWEDISH Sweden ENGLISH/UK ENGLISH/AUSTRAI Australia GERMAN/GERMANY Germany FINNISH Finland GREEK Greece MMC [731] This option may not be available in certain OfficeServ models. CONDITION NONE 2-278 © SAMSUNG Electronics Co., Ltd.
Page 317 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 731. CLEAR AA MSG MSG01 :NO Display shows: 2) Press Right Soft button to move cursor. CLEAR AA MSG MSG01 :NO Press Volume buttons to select the message that you want to delete.
Page 318: Aa Translation Table
If a caller dials 1, the call will be transferred to group 526. If a caller dials 5, the call will be transferred to plan 08. 2-280 © SAMSUNG Electronics Co., Ltd.
Page 319 OfficeServ 7000 Series Call Server Programming Manual Number conflicts like 2 and 23 or 56 and 567 are allowed in translation table programming. In these cases, the system will compare received digits from AA card after AA TRANS time and transfer to the proper destination.
Page 320 Press Speaker button to advance to next MMC. RELATED MMC MMC 731 AA MESSAGE MMC 733 AA PLAN TABLE MMC 735 AA USE TABLE MMC 736 AA MESSAGE MATCH MMC 739 ASSIGN AA MOH 2-282 © SAMSUNG Electronics Co., Ltd.
Page 321: Aa Plan Table
OfficeServ 7000 Series Call Server Programming Manual [733] AA PLAN TABLE Used to program each AA plan. A plan is a module that processes a call. There are twelve plans available in each AA card. Each plan can route a caller to any group, extension or another plan.
Page 322 This destination can be another station, station group or plan. Plans are entered by pressing A button plus two digits 01-12. MMC [733] This option may not be available in certain OfficeServ models. 2-284 © SAMSUNG Electronics Co., Ltd.
Page 323 OfficeServ 7000 Series Call Server Programming Manual CONDITION NONE DEFAULT DATA Option Value PLAN MSG1~6 ALTER MSG INVLID MSG NO ANS MSG XFER MSG BUSY MSG NO STN MSG NO ACT MSG CAMP ON ANS DELAY 1 sec RETRY CNT...
Page 324 Press Speaker button to advance to next MMC. RELEATED DATA MMC 731 AA MESSAGE MMC 732 AA TRANSLATION TABLE MMC 735 AA USE TABLE MMC 736 AA MESSAGE MATCH MMC 739 ASSIGN AA MOH 2-286 © SAMSUNG Electronics Co., Ltd.
Page 325: Aa Use Table
OfficeServ 7000 Series Call Server Programming Manual [735] AA USE TABLE Determines what plan will answer each call. Each AA is assigned a specific plan and each AA group assigned in MMC 601 is assigned a specific plan. When a call is received by an AA port, the appropriate plan will answer the call depending on the port or group that was called.
Page 326: Aa Message Match
Press Volume button to make selection and press Right Soft button to move cursor. 3) Enter message number for composition ([01]-[64]) AA MSG MATCH (01) 11+12+13+14+15 If the number of message is under 5, press Right Soft button after finishing digit input. 2-288 © SAMSUNG Electronics Co., Ltd.
Page 327 OfficeServ 7000 Series Call Server Programming Manual 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED MMC MMC 731 AA MESSAGE MMC 732 AA TRANSLATION TABLE MMC 733 AA PLAN TABLE MMC 735 AA USE TABLE ©...
Page 328: Assign Aa Moh
4) Press Transfer button and enter to exit. Press Speaker button to advance next MMC. RELATED ITEMS MMC 309 ASSIGN STATION MUSIC ON HOLD MMC 408 ASSIGN TRUNK MOH SOURCE MMC 607 UCD OPTIONS MMC 736 AA MESSAGE MATCH 2-290 © SAMSUNG Electronics Co., Ltd.
Page 329: Station Pair
OfficeServ 7000 Series Call Server Programming Manual [740] STATION PAIR Assigns a secondary station to a phone. This secondary station can be a keyset or single line phone. The secondary station assumes the Call Forwarding, Class of Service, LCR Class, and DND attributes of the primary station. The secondary station will ring when the primary station rings, and vice versa.
Page 330: Costing Dial Plan
Wild cards are checked after exact digits. If 1813 and 18∗∗ are entered, the system will check 1813 first. If no match is found, it will check 18∗∗. 2-292 © SAMSUNG Electronics Co., Ltd.
Page 331 OfficeServ 7000 Series Call Server Programming Manual DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and enter 746. COST DP (001) DIGIT: Display shows: 2) Dial CALL COST entry. (e.g., 005) COST DP (005) DIGIT:_ Press Volume button to select entry and press Right Soft button to move cursor.
Page 332: Rate Calculation Table
1ST DUR:000 SEC Display shows: 2) Dial COST RATE number 1-8. (e.g., 3) COST RATE (3) 1ST DUR:000 SEC Press Volume button to select COST RATE and press Right Soft button to move cursor. 2-294 © SAMSUNG Electronics Co., Ltd.
Page 333 OfficeServ 7000 Series Call Server Programming Manual 3) Dial option number 0-4. (e.g., 1) COST RATE (3) 1ST COST:000 Press Volume button to select option and press Right Soft button to move cursor. 4) Enter data via dial keypad. (e.g., 125=1.25)
Page 334: Svm System
CHAPTER 2. MMC Programming [750] SVM SYSTEM This MMC is used for the Samsung Built-In Voice Mail card. There are four options available in this MMC: Option Description SVM AUTO SETUP When the Built-In Voice Mail card starts, part of the power up procedure will download data from the system to determine time, date, what mailboxes to create, and system numbering plan.
Page 335 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description PSTN TRUNK This option is determine whether download PSTN TRUNK tel number or not. VOIP TRUNK This option is determine whether download SIP TRUNK tel number or not. SPNET TRUNK This option is determine whether download SPNET TRUNK tel number or not.
Page 336: User Options
Press Volume button to make selection and press Right Soft button to save. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC750 SVM SYSTEM 2-298 © SAMSUNG Electronics Co., Ltd.
Page 337: Auto Record
OfficeServ 7000 Series Call Server Programming Manual [752] AUTO RECORD This MMC is only used for the Samsung Built-In Voice Mail card. Specific stations in the phone system can be assigned to automatically record conversations. When this option is set, all incoming, all outgoing, or all calls (incoming and outgoing) can be recorded.
Page 338 PORT:209 CALL:B Press Volume button to make selection and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-300 © SAMSUNG Electronics Co., Ltd.
Page 339: Warning Destination
OfficeServ 7000 Series Call Server Programming Manual [753] WARNING DESTINATION This MMC is only used for the Samsung Built-In Voice Mail card. It provides an emergency destination for calls destined for the card if the card is removed or is offline.
Page 340: Vm Halt
CHAPTER 2. MMC Programming [754] VM HALT This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM in case of OfficeServ 7030, 7070, 7100, 7200 MP20S system. It is used to halt the Voice Mail card or embeded VM.
Page 341: Vm Alarm
OfficeServ 7000 Series Call Server Programming Manual [755] VM ALARM This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM. It will generate an alarm message in the mailbox defined in MMC 751 whenever the Voice Mail disk drive reaches a threshold.
Page 342: Assign Vmmoh
CHAPTER 2. MMC Programming [756] ASSIGN VMMOH This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM. It is used to assign each port a Music-On-Hold source for the system from a sound file located on the Voice Mail card hard disk drive. The 100 available sound files are defined as numbers 5000 to 5099.
Page 343: Vm In/Out
OfficeServ 7000 Series Call Server Programming Manual [757] VM IN/OUT This MMC is only used for the Samsung Built-In Voice Mail Card or embeded VM. It is used to assign each Voice Mail port as used for incoming, outgoing or both-way calls.
Page 344: Vm Day/Night
Press Volume button to make a selection and press Right Soft button to save and move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 507 ASSIGN RING PLAN TIME 2-306 © SAMSUNG Electronics Co., Ltd.
Page 345: Cli Ringing
OfficeServ 7000 Series Call Server Programming Manual [759] CLI RINGING This MMC assigns a specific CLI number received from the central office to a specific ring plan destination. Also allows you to reject a specific CLI number and assign priorities.
Page 346 Press Volume button to make selection and press Right Soft button to move cursor. 9) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 312 ALLOW CALLER ID 2-308 © SAMSUNG Electronics Co., Ltd.
Page 347: Item Cost Table
OfficeServ 7000 Series Call Server Programming Manual [760] ITEM COST TABLE This MMC provides a means to assign a code to a billable item along with a 10-character name for the item. There are a maximum of 100 entries (00 to 99) in the table with item 00 reserved as the code for room deposits, 01 reserved as the code for phone deposits and items 89 to 99 reserved for other PMS stream items.
Page 348 Right Soft button to return to step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 761 TAX RATE SETUP 2-310 © SAMSUNG Electronics Co., Ltd.
Page 349: Tax Rate Setup
OfficeServ 7000 Series Call Server Programming Manual [761] TAX RATE SETUP This MMC allows the technician to set up the eight tax rates used in MMC 760. Each tax rate may be defined as a fixed value or as a percentage of the item cost. In addition, a 10- character name may be used to define the reason for the tax.
Page 350 5) Enter name and press Right Soft button to return to TAX RATE NAME:MIA BED step 2. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 760 ITEM COST TABLE 2-312 © SAMSUNG Electronics Co., Ltd.
Page 351: Room Cost Rate
OfficeServ 7000 Series Call Server Programming Manual [762] ROOM COST RATE This MMC allows the technician to set up the cost rates for a week. Each room cost rate can be assigned with a percentage of the actual room cost from Sunday to Saturday.
Page 352: Second Lcr
3) Enter IN DIGIT maximum 16 digits, and press Right (001)IN DIGIT 1234 Soft button to move cursor. 4) Enter OUT DIGIT option number ([1]). (001)OUT DIGIT Press Volume button to select OUT DIGIT and press Right Soft button to move cursor. 2-314 © SAMSUNG Electronics Co., Ltd.
Page 353 OfficeServ 7000 Series Call Server Programming Manual 5) Enter OUT DIGIT maximum 16 digits, and press (001)OUT DIGIT 7500 Right Soft button to move cursor. 6) Enter USE LCR NUM option number ([2]). (001)USE LCR NUM Press Volume button to select USE LCR NUM and press Right Soft button to move cursor.
Page 354: Disa Password
Right soft button. 4) Press the Transfer button to complete the procedure or press the Speaker button to store the data. RELATED ITEMS Program 210 Designate the system On/Off. Program 410 Extension DISA service 2-316 © SAMSUNG Electronics Co., Ltd.
Page 355: Enable Technician Program
OfficeServ 7000 Series Call Server Programming Manual [800] ENABLE TECHNICIAN PROGRAM Used to open and close technician-level programming. If programming is not opened and an attempt is made to access a system MMC, an error message will be displayed. CONDITIONS A 4-digit passcode is required to access this MMC.
Page 356: Change Technician Passcode
VERIFY :FAILURE System returns to step 2. TECH. PASSCODE NEW CODE:∗∗∗∗ 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 800 ENABLE TECHNICIAN PROGRAM 2-318 © SAMSUNG Electronics Co., Ltd.
Page 357: Customer Access Mmc Number
OfficeServ 7000 Series Call Server Programming Manual [802] CUSTOMER ACCESS MMC NUMBER Allows the System Administrator (customer) to have access to certain MMCs. For example, it is required that the customer has access to MMC 102, Call Forward, for call forwarding but it is not required that the customer has access to MMC 710, LCR Digit Table, for LCR dial plans.
Page 358: Assign Tenant Group
5) Enter tenant number. (if no change press Right Soft TENANT GROUP C:1 S:2 -03 T:2 button to return to step 2) 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-320 © SAMSUNG Electronics Co., Ltd.
Page 359: Sys I/O Mode
OfficeServ 7000 Series Call Server Programming Manual [804] SYS I/O MODE This is the program to designate the MODEM port of the system. SERVICE: Service type Number Service Type Description NOT USE Not using IT, Remote Programming BAUD RATE: Transmission time...
Page 360 Right soft button to move the cursor. 4) Enter the data. SYS I/O PORT (2) SERVICE:ALARM Press the Volume button to select the data and press the Left soft button to move the cursor. 2-322 © SAMSUNG Electronics Co., Ltd.
Page 361 OfficeServ 7000 Series Call Server Programming Manual 5) Press the Transfer button to store the data and complete the procedure or press the Speaker button to store the data and execute the programming process for the next program. RELATED ITEMS Program 725 Designate the option for the call information output.
Page 362: Tx Level And Gain
- DOWNLOAD: download adjusted CID TYPE and TX/ TX gain to SP When changing the MMC [805] ‘MMC [805] TX LEVEL AND GAIN’ should not be changed from the default levels without the assistance of the local SAMSUNG distributor. DEFAULT DATA SOME OPTIONS DEPEND ON COUNTRY ACTION DISPLAY 1) Press Transfer button and enter 805.
Page 363 OfficeServ 7000 Series Call Server Programming Manual 3) (When the TX LEVEL CONTROL is selected) a. Select the desired volume level via dial keypad. TX LEVEL CONTROL LEVEL 11 Press Volume button to go to the next volume level and press Right Soft button.
Page 364: Card Pre-Install
5) Dial 1 for YES to reset card or dial 0 for NO. C:1–S:6 ARE YOU SURE?NO Press Volume button to make selection and press Right Soft button. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. 2-326 © SAMSUNG Electronics Co., Ltd.
Page 365 OfficeServ 7000 Series Call Server Programming Manual RELATED ITEMS MMC 724 DIAL NUMBERING PLAN © SAMSUNG Electronics Co., Ltd. 2-327...
Page 366: Phone Volume Control
ACOU DECOUPL ELEC DECOUPL T/R RATIO R/T RATIO When changing the MMC [807] ‘MMC [807] PHONE VOLUME CONTROL’ should not be changed from the default levels without the assistance of the local SAMSUNG distributor. 2-328 © SAMSUNG Electronics Co., Ltd.
Page 367 OfficeServ 7000 Series Call Server Programming Manual DEFAULT DATA DEPENDS ON PHONE TYPE ACTION DISPLAY 1) Press Transfer button and enter 807. VOL.CONTROL:US24 Display shows: KEY TONE VOL:1 2) Enter phone type via dial keypad. VOL.CONTROL:EU24 KEY TONE VOL:1 Press Volume button to make selection and press Right Soft button to move cursor.
Page 368: Halt Processing
Press Volume button to make selection and press Right Soft button to enter and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-330 © SAMSUNG Electronics Co., Ltd.
Page 369: Reset System
OfficeServ 7000 Series Call Server Programming Manual [811] RESET SYSTEM Provides a means of restarting the system. The system can simply be reset or it can be reset and all memory cleared to default values. Extreme care should be taken when using this MMC.
Page 370: Set Country Code
[812] SET COUNTRY CODE Selects the country for correct system programming and operation. When changing the MMC [812] ‘MMC [812] SET COUNTRY CODE’ should not be used from the default levels without the assistance of the local SAMSUNG distributor. DEFAULT DATA NONE ACTION DISPLAY 1) Press Transfer button and enter 812.
Page 371: Hotel Operation
OfficeServ 7000 Series Call Server Programming Manual [813] HOTEL OPERATION Allows the installing technician to enable the HOTEL feature. DEFAULT DATA DISABLE ACTION DISPLAY 1) Press Transfer button and enter 813. HOTEL OPERATION DISABLE Display shows: 2) Dial 1 for ENABLE or 0 for DISABLE.
Page 372: Customer Database Copy
The time the SYSDB will be saved to the MCDB. A Media Card A Media Card must be installed in order to copy the on board system database (SYSDB) on to the Media card (MCDB). DEFAULT DATA DAILY SAVE 00:00 (no daily save) 2-334 © SAMSUNG Electronics Co., Ltd.
Page 373 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 815. CUST DBASE: MCDB S:12/01/01 00:00 Display shows: If the Media card is in use, the display shows: CUST DBASE: MCDB MEDIA IS BUSY 2) Press Right Soft button to move cursor.
Page 374: Conference Gain
This option may not be available in certain OfficeServ models. When changing the MMC [816] ‘MMC [816] CONFERENCE GAIN’ is not to correct low volume. To be used with the support of local SAMSUNG Electronics Co. distributor. DEFAULT DATA ACTION DISPLAY 1) Press Transfer button and enter 816.
Page 375: Stop Memory
OfficeServ 7000 Series Call Server Programming Manual [817] STOP MEMORY This function is for memory UNMOUNT, before restart system, Field Description STOP MEDIA Memory UNMOUNT in SD Card. (This option may not be available in certain OfficeServ models.) STOP MEMORY Memory UNMOUNT in SD Card and NAND Flash.
Page 376: Program Download
4) Press Volume button to select YES and press Right LP40 PGM:C1 DOWNLOAD NOW?YES Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-338 © SAMSUNG Electronics Co., Ltd.
Page 377: Media Card File Control
OfficeServ 7000 Series Call Server Programming Manual [819] MEDIA CARD FILE CONTROL Displays the size (in bytes) of various system program files on the Media card. Also allows deletion of a file by selecting the file and pressing the HOLD key if system is not OfficeServ 7100.
Page 378 Press Volume button to make selection and press Right Soft button to delete file and move cursor step 2. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-340 © SAMSUNG Electronics Co., Ltd.
Page 379: Assign System Link Id
OfficeServ 7000 Series Call Server Programming Manual [820] ASSIGN SYSTEM LINK ID This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100 link IDs can be entered including SELF ID. In addition, each Link ID is associated with the IP address.
Page 380 CHAPTER 2. MMC Programming RELATED ITEMS MMC 821 ASSIGN NETWORK TRUNK MMC 823 ASSIGN NETWORK COS MMC 824 NETWORK DIAL TRANSLATION MMC 830 LAN PARAMETERS 2-342 © SAMSUNG Electronics Co., Ltd.
Page 381: Assign Network Trunk
OfficeServ 7000 Series Call Server Programming Manual [821] ASSIGN NETWORK TRUNK Assigns the Q-Signaling PRI trunk for networking and let the Q-Signaling PRI trunk be linked with other PBX systems. It is assigned data on a per-TEPRI card basis. Option...
Page 382: Virtual Extension Type
Right Soft button to move cursor. [ALL] PORT TYPE Select all ports. 3) Enter virtual extension type. [3501] PORT TYPE Press Volume button to make selection and press Right Soft button to save and move cursor. 2-344 © SAMSUNG Electronics Co., Ltd.
Page 383 OfficeServ 7000 Series Call Server Programming Manual 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE © SAMSUNG Electronics Co., Ltd. 2-345...
Page 384: Assign Network Cos
DND Announcement DNDO Do Not Disturb Override DNDO CAPABL DNDO Capability Level (0~3) DNDO PROTEC DNDO Protection Level (1~3) PAGE PAGE PATH REPL. Path Replacement PATH RETEN Path Retention CONDITIONS NONE DEFAULT DATA SEE DESCRIPTION 2-346 © SAMSUNG Electronics Co., Ltd.
Page 385 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 823. NETWORK COS (01) 01:CALL OFFER:Y Display shows: 2) Dial the class of service number. (01-30) NETWORK COS (02) 01:CALL OFFER:Y Press Volume button to select and press Right Soft button to move cursor.
Page 386: Network Dial Translation
6) Enter YES/NO to display other node extension in 01:601 (60201 DISP:N MBX:N internal extension number format. Press Volume button to select and press Right Soft button to move cursor. 2-348 © SAMSUNG Electronics Co., Ltd.
Page 387 OfficeServ 7000 Series Call Server Programming Manual 7) Enter YES/NO to assign Mailbox to remote 01:601 (60201 DISP:Y MBX:N extension automatically. Press Volume button to select and press Right Soft button to move cursor. 8) Press Transfer button to save and exit.
Page 388: Assign Networking Options
Press Volume button to select and press Right Soft button to move cursor. 3) Dial 1 for YES or 0 for NO. USE REMOTE VM Press Volume button to select YES/NO and press Right Soft button to mover cursor. 2-350 © SAMSUNG Electronics Co., Ltd.
Page 389 OfficeServ 7000 Series Call Server Programming Manual 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE © SAMSUNG Electronics Co., Ltd. 2-351...
Page 390: Assign System Reference Clock
REFERENCE CLOCK PRIORITY 1:C1-S3 Press Volume button to select and Press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-352 © SAMSUNG Electronics Co., Ltd.
Page 391: Crm Dsp Mode Select
OfficeServ 7000 Series Call Server Programming Manual [827] CRM DSP MODE SELECT This MMC can assign CRM DSP mode. CRM D-Board can be operated one mode of DTMFR, R2MFC, CID. OfficeServ 7400 allows to configure the mode per DSP in CRM D-Board.
Page 392 DTMFR DTMFR Press Volume button to select and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-354 © SAMSUNG Electronics Co., Ltd.
Page 393: Rcm2 Dsp Mode Select
OfficeServ 7000 Series Call Server Programming Manual [828] RCM2 DSP MODE SELECT RCM2 D-Board is operated one mode of R2/CID, R2 only, CID only, B’d TYPE This MMC can assign RCM2 DSP mode. CONDITION RCM2 board must be equiped in LCP.
Page 394: Lan Printer Parameters
Sets duplex (0. FALSE, 1. TRUE) ORIENTATION PORTRAIT Orientation (0. PORTRAIT, 1. LANDSCAPE) PRINT TRAY DEFAULT Printer tray (0.Default, 1.Tray1, 2.Tray2, 3.Manual) RESOLUTION Resolution (0.300, 1.600) LINE/PAGE Lines per page DEFAULT DATA SEE DESCRIPTION 2-356 © SAMSUNG Electronics Co., Ltd.
Page 395 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 829. [01] DATA TYPE SMDR Display shows: 2) Enter type of data to be printed. [02] DATA TYPE UCD REPORT Press Volume button to select the type and press the Right Soft button to move the cursor.
Page 396: Lan Parameters
Specify the system IP address is IPv4/Ipv6 (This option may not be available in certain OfficeServ models.) DATA SERVER IP IP address of Data Server (This option may not be available in certain OfficeServ models.) 2-358 © SAMSUNG Electronics Co., Ltd.
Page 397 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description IP-UMS SERVER Specify an IP UMS SERVER IP address. (This option may not be available in certain OfficeServ models.) IP-UMS PORT Specify an IP UMS SERVER port. (This option may not be available in certain OfficeServ models.) IP-IVR SERVER Specify an IP IVR SERVER IP address.
Page 398 7) Press Volume button to make selection and press Right SYSTEM RESTART ARE YOU SURE? NO Soft button to store and move cursor. 8) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-360 © SAMSUNG Electronics Co., Ltd.
Page 399: Mgi Parameters
OfficeServ 7000 Series Call Server Programming Manual [831] MGI PARAMETERS This MMC provides network configuration of the MGI/OAS card (s) in the system. Parameter Description IP ADDRESS Specifies the IP address for the MGI card. GATEWAY Specifies the designated IP gateway address used for contacting IP devices beyond the local subnet.
Page 400 4) Enter MGI parameter. [3801] IP ADDRESS 165. 10. 1.100 Press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-362 © SAMSUNG Electronics Co., Ltd.
Page 401: Voip Access Code
OfficeServ 7000 Series Call Server Programming Manual [832] VoIP ACCESS CODE Provides a means to apply the Internet Protocol (IP) address to the VoIP gateway. This MMC also assigns the number of channels that can be used for IP faxes.
Page 402 !, $, %, &, *, (, ), _, +, ?, -, =, ., /, ; DEFAULT DATA ACCESS DGT: NONE INSERT DGT: NONE DGT LENGTH: 1 DEL.LENGTH: 1 IP TABLE 1: 00 IP START: NONE SERVER USE: NO 2-364 © SAMSUNG Electronics Co., Ltd.
Page 403 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 832. (O:00)ACCESS DGT Display shows the outbound and first access code. 2) Enter 0 for O (outbound) or 1 for I (inbound) code (O:00)ACCESS DGT table.
Page 404: Voip Ip Table
DEFAULT DATA TB (000) ENTRY (00): MMC 830 SYSTEM IP ADDR PROTOCOL: SIP ALIVE CHK: NONE RMT PORT: 5060 CHK TIMER: 1800 ALIV STS: All ENTRY AVAIL are YES SIG TYPE: UDP ALL OTHERS: EMPTY 2-366 © SAMSUNG Electronics Co., Ltd.
Page 405 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 833. TB (000) IP ADDR 1 Display shows the first table number. 0. 0. 0. 0 2) Enter table number (00-62) via dial keypad. TB (000) IP ADDR 1 0.
Page 406: Options
This option selects how incoming calls are routed FOLLOW when the MGI is used as a H.323 gateway. DID TRANS 0 FOLLOW TRUNK RING: Follows MMC 406 1 FOLLOW DID TRANS: Follows MMC 714 2 FOLLOW INCOM DGT: Follows MMC 724 2-368 © SAMSUNG Electronics Co., Ltd.
Page 407 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description Default ALLOW GW CHECK When using a gatekeeper, this permits the H.323 DISABLE gateway to check for gatekeeper presence. CLIR WITH NUMBER When this option is enabled, the CLIP number is...
Page 408: Mgi Dsp Options
64 ms Used to set the Echo Canceller configuration. Echo Canceller Tail Length is adjustable from 8 ms to 128 ms, in 8 ms increments. Set EC Tail length. The range is 8~128 ms. 2-370 © SAMSUNG Electronics Co., Ltd.
Page 409 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description Default SILENCE SUP This parameter determines whether silence suppression DISABLE is used. This prevents transmission during the silence period of a call, and conserves bandwidth when enabled. TO RTP GAIN PCM input gain value of DSP.
Page 410 G.719 codec G729s FRAME specify the transmission interval time of the VoIP packet 20 ms for G.729a codec G723 FRAME specify the transmission interval time of the VoIP packet 30 ms for G.711 codec 2-372 © SAMSUNG Electronics Co., Ltd.
Page 411 OfficeServ 7000 Series Call Server Programming Manual MGI Card parameters Parameter Description Default AUDIO CODEC Selects the Audio Codec of an MGI card. G.729A ECHO CANCEL Enables or disables echo cancellation. This function ENABLE removes the echo that is generated by voice reflection and packet delay.
Page 412 DTMF TYPE There are two types of DTMF transmission: INBAND, OUTBAND which is industry standard (H.245) type DTMF transport, and OUTBAND which is a Samsung proprietary method. TOS/DifServ An 8-bit binary value that will be used by external All bits 0...
Page 413 OfficeServ 7000 Series Call Server Programming Manual 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 831 MGI PARAMETERS © SAMSUNG Electronics Co., Ltd. 2-375...
Page 414: Gk Options
GK DOWN ROUTE This provides an alternate route if the primary PSTN gatekeeper is down. Selections are PSTN or ALTER URQ REASON Select ON or OFF for use of Un-register Request MODE RAS (URQ) messages. 2-376 © SAMSUNG Electronics Co., Ltd.
Page 415 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description Default RRQ FAIL TIME Programs the time frame to re-send Registration 30 seconds Request RAS (RRQ) messages to a gatekeeper. The range is 1~99. GRQ SEND Select ON or OFF for use of Gatekeeper RAS Request (GRQ) messages.
Page 416 Press Volume button to make selection and press Right Soft button to save and return step 3. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 834 H.323 OPTIONS 2-378 © SAMSUNG Electronics Co., Ltd.
Page 417: Sip Options
OfficeServ 7000 Series Call Server Programming Manual [837] SIP OPTIONS This MMC permits the adjustments of optional Session Initiation Protocol (SIP) trunk parameters. The MCP supports SIP and H.323 on a per-call-per-port basis. The settings are system wide. When changing IP When changing any IP address/value, listed below, three digits must be input for each (octet) field.
Page 418 1 FOLLOW INCOM DGT: Follows MMC 724 2 FOLLOW TRUNK RING: Follows MMC 406 PEER CLIPTB Refers to SEND CLI NUMBER (MMC 323), which provides calling party identification when sending out a SIP peering call. 2-380 © SAMSUNG Electronics Co., Ltd.
Page 419 OfficeServ 7000 Series Call Server Programming Manual SIP Carrier Configuration Parameter Description Default SIP CARRIER Alphanumeric Name of SIP Carrier This indicates the ISP carrire name. User can set this value, but the value doesn’t affect to work of system.
Page 420 SIP server, the SIP Server IP is used in the From/To Header, however this is the option used when to use its own IP of the terminal in case of a specific SIP server. 2-382 © SAMSUNG Electronics Co., Ltd.
Page 421 323 should be entered here. This is only used when MMC 405 value is null. SS TYPE Indicates how SIP call flow will be done; Samsung vs. Samsung Standard. When set to Samsung, system will not follow standard SIP call flow that is recommended in RFCs, but instead will initiate Samsung proprietary call flow.
Page 422 When the character you want appears on the same dial pad key as the previous character, press the Volume Up button to move the cursor to the right or the Volume Down button to move the cursor to the left. A space can be entered using these keys. 2-384 © SAMSUNG Electronics Co., Ltd.
Page 423 OfficeServ 7000 Series Call Server Programming Manual COUNT DIAL 0 DIAL 1 DIAL 2 DIAL 3 DIAL 4 DIAL 5 DIAL 6 DIAL 7 DIAL 8 DIAL 9 DIAL * The # button can be used for the following special characters: !, $, %, &, *, (, ), _, +, ?, -, =, ., /, ;...
Page 424 CALLING PARTY NUMBER MMC 405 TRUNK CO TEL NUMBER MMC 306 TRUNK RING ASSIGNMENT MMC 714 DID NUMBER AND NAME TRANSLATION MMC 724 DIAL NUMBERING PLAN MMC 832 VoIP ACCESS CODE MMC 834 H.323 OPTIONS 2-386 © SAMSUNG Electronics Co., Ltd.
Page 425: Private Ip Addresses
OfficeServ 7000 Series Call Server Programming Manual [838] PRIVATE IP ADDRESSES This MMC is used to select which SYSTEM IP Address (PRIVATE or PUBLIC) is used to connect other devices via an H.323 or SIP trunk. The device that use the PRIVATE IP Address assigned in this MMC, the PRIVATE SYSTEM IP Address will be used to connect the device.
Page 426: Sip User
From-Header in outgoing INVITE message. ROUTING When dialed number is matched with TEL NO in this DEFAULT table, this specifies the SIP CARRIER to which outbound message is transferring. 2-388 © SAMSUNG Electronics Co., Ltd.
Page 427 OfficeServ 7000 Series Call Server Programming Manual ENTERING USERNAME, AUTH UID, AUTH PWD The characters which are related to VoIP are limited. So it is different to entering special characters in normal case. Refer to the below. Volume Up/Down keys...
Page 428 16 digits. 5) Press the Transfer button to store the data and complete the procedure, or press the Speaker button to store the data. RELATED ITEMS Program 837 Designate the SIP option. 2-390 © SAMSUNG Electronics Co., Ltd.
Page 429: Ip Phone Information
OfficeServ 7000 Series Call Server Programming Manual [840] IP PHONE INFORMATION This MMC provides a means to register IP phones with the OfficeServ 7000 Series system. During registration, the IP and MAC addresses are also registered. The User ID and Password must match the table entry in this MMC for the IP phone to be registered.
Page 430 Designate whether to use the QoS. DISABLE FRC LOGOUT This is used to logout the registration of a particular IP phone. IP phone should support IDLE MODE function and be login status. This is useful for maintenance. 2-392 © SAMSUNG Electronics Co., Ltd.
Page 431 OfficeServ 7000 Series Call Server Programming Manual DEFAULT DATA SEE DESCRIPTION ACTION DISPLAY 1) Press Transfer button and enter 840. [3201]USER ID 3201 Display shows: 2) Enter IP phone number via dial keypad. [3210]USER ID 3210 Press Volume button to make selection and press Right Soft button to move cursor.
Page 432: System Ip Options
CHAPTER 2. MMC Programming [841] SYSTEM IP OPTIONS This MMC provides various proprietary Samsung VoIP and IP integration options. The options set in this MMC apply system wide. Option Description Default PHONE VERSION Sets running IP-based phone and new phone software NONE version with the system.
Page 433 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description Default CTI LINK OPTION Sets CTI link via LAN option with the system. 0 SMDR REPORT: Sets YES or NO for SMDR data to CTI link via LAN. 1 UCD REPORT: Sets YES or NO for UCD data to CTI link via LAN.
Page 434 MMC COMMAND: IP-based phone COMMAND software upgraded manually in MMC 840. b) PHONE CON: IP-based phone software upgraded automatically when phone connected. c) AUTO TIME: IP-based phone software upgraded automatically at set time. 2-396 © SAMSUNG Electronics Co., Ltd.
Page 435 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description Default ITP VERS 1. START (HHMM): IP-based phone software 2222 UPGRADE automatic upgrade start time. (Disable) 2. INTERVAL: IP-based phone software automatic 10 seconds. upgrade interval time. MGI ALIVE Set the time interval of checking the link connection of...
Page 436 Press Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 840 IP PHONE INFORMATION 2-398 © SAMSUNG Electronics Co., Ltd.
Page 437: Sip Station Information
OfficeServ 7000 Series Call Server Programming Manual [842] SIP STATION INFORMATION This MMC provides a means of registering the SIP with the OfficeServ 7000 series system. Parameter Description REGISTERED This indicates whether the corresponding standard SIP terminal is registered. IP ADDRESS...
Page 438 4) Enter option data. [3202]IP TYPE PUBLIC Press Right Soft button to save and return to step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-400 © SAMSUNG Electronics Co., Ltd.
Page 439: Mps Options
OfficeServ 7000 Series Call Server Programming Manual [843] MPS OPTIONS This MMC provides network configuration of MPS (Media Proxy Server) in the system. This option can be shown in some OfficeServ system. Parameter Description LOCATION Located Cabinet and slot number of MPS.
Page 440 4) Enter MPS parameter. [MPS] IP ADDRESS 165. 10. 1.100 Press Right Soft button to move cursor. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-402 © SAMSUNG Electronics Co., Ltd.
Page 441: Uc Ip Phone Information
OfficeServ 7000 Series Call Server Programming Manual [844] UC IP PHONE INFORMATION This MMC provides IP phone’s advance function. Parameter Description XML SERVER URL Specifies the server url for the XML. LDAP SERVER URL Specifies the server url for the LDAP.
Page 442: Wlan Parameters
Thus, the server must retransmit the reply for this length of time until it receives the requested retransmission. For example, this parameter can be used as the waiting time after sending 200 OK for INFO. 2-404 © SAMSUNG Electronics Co., Ltd.
Page 443 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description Default (ms) INV RING TM When using an unreliable transmission protocol, the 1000 client cannot verify if the server has received the ACK returned to the server for the INVITE Final Response.
Page 444: Wip Information
Handover Scan Time Value (0~99) SCAN Time is a period of scanning for WLAN Handover. If the signal level of WLAN phone is under the Thresh Hold, WLAN phone will start scanning with the registered period (=SCAN Time). 2-406 © SAMSUNG Electronics Co., Ltd.
Page 445 OfficeServ 7000 Series Call Server Programming Manual DEFAULT DATA SEE DESCRIPTION ACTION DISPLAY 1) Press Transfer button and enter 846. [3301] REGISTERED 2) Dial the WIP number. [3301] REGISTERED Press Volume button to select station and press Right Soft button to move cursor.
Page 446: Wlan Ip/Mac List
168. 0. 0. 0 5) A number next to USED indicates the terminal IP:001 USED:3301 168.219.149. 5 number to which the IP ADDRESS was assigned. RELATED ITEMS MMC 846 WIP INFORMATION MMC 849 WLAN CONFIGURATION 2-408 © SAMSUNG Electronics Co., Ltd.
Page 447: Wlan Configuration
OfficeServ 7000 Series Call Server Programming Manual [849] WLAN CONFIGURATION This MMC is used to set the WLAN configuration. Parameter Description REGISTER VoWLAN Enable or disable registration of new WiFi phone. WIP REGIST CLEAR Used to clear the registration of WIP. FORCED mode clearing is used when the device is not connected normally (e.g., device broken),...
Page 448: System Resource Display
Display shows: 2) Enter the option number. (0-3) CID DSP’S USE:000 FREE:014 Press Volume button to select. 3) Press Transfer button to save and exit. Press Speaker button advance to next MMC. RELATED ITEMS NONE 2-410 © SAMSUNG Electronics Co., Ltd.
Page 449: Alarm Reporting
OfficeServ 7000 Series Call Server Programming Manual [851] ALARM REPORTING This MMC is used to view, store, print or clear system alarms. Two levels of faults are displayed via an alarm code: major alarms and minor alarms. Major alarms codes are usually service affecting and require a certified technician to determine the fault.
Page 450 VIEW ALARMS Press Right Soft button to return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 852 SYSTEM ALARM ASSIGNMENTS 2-412 © SAMSUNG Electronics Co., Ltd.
Page 451: System Alarm Assignments
OfficeServ 7000 Series Call Server Programming Manual [852] SYSTEM ALARM ASSIGNMENTS This MMC allows the assignment of system alarms to ring and display on stations that have an Alarm key assigned. The Alarm key is assigned in MMC 722 (Station Key Programming).
Page 452 SYS Normal System Normal Temperature alarm Temp MJA30 PCM SW Init Fail PCM Switch initial fail alarm MJA31 PCM SW Init Rec PCM Switch initial recovered alarm MJB-- LCP/TASK Error LCP or TASK Fault 2-414 © SAMSUNG Electronics Co., Ltd.
Page 453 OfficeServ 7000 Series Call Server Programming Manual (Continued) Code Alarm Name Definition MJB01 HDLC Comm Error Communications to LCP lost or faulty. MJB02 Memory Alarm 1 A RAM diagnostic check error has occurred in the MP card. MJB06 IPC MSGQ Over IPC TX queue full error has occurred in the MP card.
Page 454 Alarm Data = Cabinet, Slot (Cx-Syy) MJE04 MGI NTWK Error The MGI card has blocked because the system detects the card doesn’t respond via network link. External ping test. Alarm Data = Cabinet, Slot (Cx-Syy) 2-416 © SAMSUNG Electronics Co., Ltd.
Page 455 OfficeServ 7000 Series Call Server Programming Manual (Continued) Code Alarm Name Definition MJE05 MGI NTWK Rec The MGI card has restarted because the system detects the card does respond via network link. External ping test. Alarm Data = Cabinet, Slot (Cx-Syy)
Page 456 SVMi Card Request start MNF34 SVMi Ready End SVMi Card Ready end MNF35 SVMi Request SVMi Card Request end MNF36 SVMi HDD Alarm SVMi Card HDD Alarm MNF37 Manual Reset Card Manual Reset Request 2-418 © SAMSUNG Electronics Co., Ltd.
Page 457 OfficeServ 7000 Series Call Server Programming Manual (Continued) Code Alarm Name Definition MNF38 Card Active Card Active notification MNF39 MEDIA CARD IN MEDIA CARD IN MNF40 MEDIA CARD MEDIA CARD OUT with dismount MNF41 SYS FAN Stop System FAN Stop alarm...
Page 458 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 501 SYSTEM TIMERS MMC 722 STATION KEY PROGRAMMING MMC 723 SYSTEM KEY PROGRAMMING MMC 851 ALARM REPORTING MMC 853 MAINTENANCE BUSY 2-420 © SAMSUNG Electronics Co., Ltd.
Page 459: Maintenance Busy
OfficeServ 7000 Series Call Server Programming Manual [853] MAINTENANCE BUSY This MMC is used to place stations, trunks and common resources equipment in a maintenance busy condition. This can be used to isolate suspected intermittent problems. Stations placed in maintenance busy will behave like a station in DND when called.
Page 460 Right Soft button to save and return step 3. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 851 ALARM REPORTING MMC 852 SYSTEM ALARM ASSIGNMENTS 2-422 © SAMSUNG Electronics Co., Ltd.
Page 461: Diagnostic Time
OfficeServ 7000 Series Call Server Programming Manual [854] DIAGNOSTIC TIME Provides a means to set the Diagnostic Time. The system diagnostics tests include memory audits, internal loopback tests on digital trunks, and DSP, AA DSP tests. Additional tests include CODEC tests on analogue trunk and station cards and tone tests. If the diagnostics cannot complete the tests because of system traffic, the system will abort the tests and retry during the next programmed diagnostic time.
Page 462: Display System Options
MP40 SW:00000111 Display shows: 2) Press Volume button to view options. SYSTEM OPTIONS C1-LP CONN:YES 3) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-424 © SAMSUNG Electronics Co., Ltd.
Page 463: Tech Programming Logs
OfficeServ 7000 Series Call Server Programming Manual [856] TECH PROGRAMMING LOGS This MMC lists the date, time and entry location of the last eight times that technician- level programming was accessed. This allows a technician to determine if there was unauthorized access to system programming and where this access occurred.
Page 464: Virtual Cabinet Set
Right soft button. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 724 NUMBER P LAB MMC 822 VIR.EXT TYPE 2-426 © SAMSUNG Electronics Co., Ltd.
Page 465: Oas Card Service
OfficeServ 7000 Series Call Server Programming Manual [858] OAS CARD SERVICE OAS is composed of MFR, MGI, and MPS. MFR supports a DTMF receiver, MGI processes voice stream and MPS forwards RTP packets. The MMC is used for configuring the number of channels about MFR and MGI. The MMC is only shown in specific OfficeServ models.
Page 466: Hardware Version Display
Shows the Mother board version of cabinet MP CARD Shows the EPLD/PCB version of MP card MODEM Show the Modem version. CxSy Shows the EPLD/PCB version of card in cabinet x/slot y DEFAULT DATA NONE 2-428 © SAMSUNG Electronics Co., Ltd.
Page 467 OfficeServ 7000 Series Call Server Programming Manual ACTION DISPLAY 1) Press Transfer button and enter 859. EPLD/PCB VERSION MP40 CARD :V11 Display shows: 2) Enter the option number. EPLD/PCB VERSION C1 M-BOARD :V11 Press Volume button to scroll. 3) Press Transfer button to save and exit.
Page 468: License
After being enabled, it can be used for 2 weeks. When the tutorial license is enabled, the available resources shall be available as follows. 2-430 © SAMSUNG Electronics Co., Ltd.
Page 469 OfficeServ 7000 Series Call Server Programming Manual (Continued) Parameter Description TEMP LICENSE 2 VM channels 2 MGI channels 2 MOBEX Executive users 2 Soft phones 2 H.323 trunks 2 SIP trunks 2 Samsung SIP phones 2 3rd-Party SIP phones 2 Samsung SIP applications...
Page 470: System Options
This option can be shown in the OfficeServ 7200. 0: OS7200 CABINET 1: OS7100 CABINET MAX CHAIN FWDALL If ALL CALL FORWARD or BUSY FORWARD is set, it is possible to designate how many hops can be supported. 2-432 © SAMSUNG Electronics Co., Ltd.
Page 471 OfficeServ 7000 Series Call Server Programming Manual (Continued) Option Description PINGRING SERVICE This is the option to support PING RING SERVICE. The PING RING SERVICE means that the stations which are same pickup group can display the information of a call and ring after designated time just one time.
Page 472 AUTO UPDATE TIME ENABLE Press Volume button to select and press Right Soft button to store. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-434 © SAMSUNG Electronics Co., Ltd.
Page 473: System Node Information
OfficeServ 7000 Series Call Server Programming Manual [863] SYSTEM NODE INFORMATION This MMC is the program that specifies the system information of SPNET (Samsung Protocol Networking). It is useful when many systems are consisted through SPNET and interlocked with LCR. There are maximum 2000 entries.
Page 474 CHAPTER 2. MMC Programming 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC 710 LCR DIGIT 2-436 © SAMSUNG Electronics Co., Ltd.
Page 475: Fan Power Control
OfficeServ 7000 Series Call Server Programming Manual [865] FAN POWER CONTROL This MMC is the program that can control power of FAN located in the cabinet. CONDITIONS When using the MMC [865] This MMC is only shown in OfficeServ 7400 because OfficeServ 7400 only supports FAN POWER CONTROL.
Page 476: Irm Dsp Mode Select
Press Volume button to select and press Right Soft button to move cursor. 4) Dial the DSP number. (1-2) C:1-LOC:1-CH:01 DTMFR DTMFR Press Volume button to select and press Right Soft button to move cursor. 2-438 © SAMSUNG Electronics Co., Ltd.
Page 477 OfficeServ 7000 Series Call Server Programming Manual 5) Dial digit to select CRM mode. (0-2) C:1-LOC:1-CH:01 DTMFR DTMFR Press Volume button to select and press Right Soft button to move cursor. 6) Press Transfer button to save and exit. Press Speaker button to advance to next MMC.
Page 478: Remote Station
0001:TEL#[2201] DGP:0022201 Soft button to move cursor. 4) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS MMC724 NUMBER PLAN MMC824 NTWK L CR D GT 2-440 © SAMSUNG Electronics Co., Ltd.
Page 479: Display Server Status
OfficeServ 7000 Series Call Server Programming Manual [889] DISPLAY SERVER STATUS This MMC displays the history of connection and disconnection to the WIM card and Feature Server with the MCP card. Also allows you to clear the recorded history log.
Page 480: Initialize Port
Press Volume button to make selection and press the Right Soft button to save and return to step 2. 5) Press Transfer button to save and exit. Press Speaker button to advance to next MMC. RELATED ITEMS NONE 2-442 © SAMSUNG Electronics Co., Ltd.
Page 481 OfficeServ 7000 Series Call Server Programming Manual ABBREVIATION Auto Attendant Authentication, Authorization and Accounting Automatic Call Distribution Application Level Gateway Answering Machine Emulation Alternate Mark Inversion Add On Module Access Point Background Music Basic Rate Interface BWBS Basic Wireless Base Station (Access Point)
Page 482 Internet Messaging Access Protocol IN-SCP Intelligent Network Service Control Point Input/Output Module Interactive Voice Response Internet Protocol Inter-Processor Communication IPDC Internet Protocol Device Control Inter-Processor Communications and Memory Module IP-SCP Internet Protocol Service Control Point © SAMSUNG Electronics Co., Ltd.
Page 483 OfficeServ 7000 Series Call Server Programming Manual ISDN Integrated Services Digital Network ISUP ISDN User Part IP Telephony Module IP Telephone Keyset Daughterboard Local Area Network Liquid Crystal Display Local Control Processor Least Cost Routing Light Emitting Diode LAN Interface Module...
Page 484 Serial Input/Output Session Initiation Protocol Single Line Interface Single Line Telephone SMDR Station Message Detail Recording SMTP Simple Mail Transfer Protocol Server optimized Linux Spanning Tree Algorithm Signaling Transfer Point SVMi Samsung Voice Mail integrated © SAMSUNG Electronics Co., Ltd.
Page 485 OfficeServ 7000 Series Call Server Programming Manual TAPI Telephony Application Programming Interface TCAP Transmission Control Application Part Transmission Control Protocol TEPRI T1E1 Private Rate Interface Trunk Module Controller Trunk User Agent User Agent Client UART Universal Asynchronous Receiver and Transmitter...
Page 487 OfficeServ 7000 Series Call Server Programming Manual ©2008~2009 Samsung Electronics Co., Ltd. All rights reserved. Information in this manual is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of SAMSUNG.

Samsung OfficeServ 7000 Series Programming Manual

Introduction

Safety Concerns

CHAPTER 1. Overview of MMC Programming

Introduction to Programming

Digital Phones

Cautions in Programming

Program List by User's Level

Program List by Function

CHAPTER 2. MMC Programming

Overview of Programming Procedure

Programming Procedure

Quick Links

Related Manuals for Samsung OfficeServ 7000 Series

Summary of Contents for Samsung OfficeServ 7000 Series