Connecting To A Stereo Vcr Or Dvd Recorder (Optional) - Cisco ISB7000 Product Manual

Connecting to a Stereo VCR or DVD Recorder (op-
tional)
The diagram below shows how to connect a recording device to your receiver. Although it
is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this
connection may not provide the best picture, and HDTV users are restricted to an SD format. In
addition, some content is copy protected and passing this content through the recording device
may result in a picture that cannot be viewed.
For these reasons, the connection shown is best used to provide only video and audio to your
recording device and not for normal TV viewing. The connection from the recording device to the
TV (only used for playback of recorded material) depends on the type of device being used, the
outputs that are supported, and the inputs that remain available for use on your TV.
Consult the owner's manuals provided with your TV and recording device for more details on
connection options.
Cables Used in this Confi guration
• 1 RCA-type Video Cable
• 1 Set Audio Left/Right Cables
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Connecting your TV directly to the Audio/Video output of your receiver will
assure a more vivid picture and enhance your viewing enjoyment.
Receiver
TO WALL TO TV
(VIDEO IN) (VIDEO OUT)
Pb
Pr
NETWORK eSATA S-VIDEO
Back of
Stereo VCR
or DVD
Recorder
Y
L L R R
VIDEO AUDIO
OUT OUT
L R
VIDEO AUDIO VIDEO
IN IN
OPTICAL HDMI
CABLE IN/
ANT IN
L R
CABLE OUT/
AUDIO
ANT OUT
OUT OUT
USB POWER
23