Yamaha SW1000XG Advanced Manualbook page 70

- Indiv6 = 2D (Sub8)
*You can assign multiple Parts to the same Indivi OUT simultaneously.
*The SendRev, and Chorus/Variation
Document/Data_E.pdf/Page#79 on the CD-ROM included in the SW1000XG package for more information.
Drum Part and Audio Part can be sent over to SUB IN also. Refer to Document/Data_E.pdf/Page#79 on the CD-
ROM included in the SW1000XG package for more information.
In other words, use XGEdit!
I get a blue screen of death on the PC when I try to install my SW1000XG, what is causing this?
This was a symptom of early drivers where IRQ steering in some systems could cause this problem. Please get the
latest driver from www.xgfactory.com, and you should find that this problem should no longer occur.
In XGWorks when I edit a sound or select a sound, it doesn't save with my MIDI file, why?
In the XGEditor screen you need to INSERT XG EVENT into the event list, this will insert the XG sysex data and
bank select/program changes that you need. Please refer to your XGWorks manual for more information on this.
I cannot seem to control input gain using the MME mixer in Windows?
The mme input gain function is not implemented on the SW1000XG current driver. Use an external mixer to control
gain or SW1000#2 wave record with XGEdit/XGEditor for Mac.
The SW1000XG defaults to Mic input on start-up rather than line level, how do I switch it to line level easily?
To do this using XGEdit, just open up the analogue mixer panel, and highlight the AD part channel you wish to switch
to line, and using your +/- keys on the numeric keypad, switch to the setting you require. Registered users of XGEdit
can then save this as a default template that can be launched on start-up using media player to just play the MIDI file.
XGWorks users can also use the mixer/XGEditor inside XGWorks to set line level as default, and then save this
information out as a MIDI file or XWS file to play when they start-up their machine. You can also use the free
(Windows only) line level setup utility from the Xgfactory website should it not be on your SW1000XG CD-ROM. For
the Macintosh, please use the XGEditor mixer panel to control this.
effects will be ignored
70
for individual parts. Refer to