Installation; Connecting To Video Equipment - Philips bCool XG1 User Manual

Component/HDTV
Philips Multimedia Projector

4. Installation

Component/HDTV
Equipment
DVD player, Settop Box,
HDTV receiver, ect.
YPbPr,YCbCr
1 Connect an optional RCA/M1 component video adaptor cable (1) to the Data in socket of
the projector.
2 Connect the plugs at the other end of the cable to the appropriate output sockets of your
Component- or HDTV-video equipment (Pr,Y, Pb / Cr,Y, Cb).
• If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio in socket of the projector.
For this, use the Audio minijack to RCA cable (2) supplied.
– Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
16

Connecting to video equipment

Video Audio in
Video Audio in
2
3b
L Audio R
out
S-Video Data in
S-Video Data in
1
Cr Y Cb
Pr Y Pb
R G B
English User guide bCool XG1
>