AEG 49669GO-MN User Manual page 15

UsING yoUr oVEN (coNtINUED)
setting the delayed start cooking time
the "cook time" and "stop time" functions can be
combined to switch the oven on and off at a specific
time during the day .
1 . select the desired oven function and
cooking temperature .
2 . press timer symbol
"cook time" ❘➔❘ symbol appears .
3. S et the desired cooking time by using – or + , whilst
the "timer arrow"
4 . press timer symbol
"end time" ➔❘ symbol appears flashing
5. S et the desired switch-off time using the – or +
whilst the "timer arrow"
time" ❘➔❘ and "end time" ➔❘ arrows are lit to confirm
that the oven has been programmed .
on completion of cooking
when the set time has elapsed, a signal will sound for 1
minute, the oven will switch off and the remaining time
indication "0 .00" will appear on the display .
1. To stop the signal, press "+" or "–".
setting the minute minder
for setting a countdown period . when the period of
time has elapsed, an audible signal is sounded .
NOTE: This feature has no effect on the oven
operation.
1 . press timer symbol
the "minute minder" symbol
Set the desired length of time using – or + whilst
the "timer arrow"
from the last time adjustment the "timer arrow"
will disappear and the minute minder has been set .
Once the set time has elapsed, a signal will sound
for 1 minute . the time indication "0 .00" and a
flashing "minute minder" symbol
the display .
2. T o stop the signal, press "+" or "–".
Using fHU (fast Heat Up) mode
to quickly and efficiently preheat your oven, it is
recommended to select the "fast heat"
cooking feature .
1 . Ensure the appliance is on by pressing the
oven lights will light .
2 . select the desired oven function by pressing
3. S et the cooking temperature by pressing the – or +
to decrease or increase the temperature .
NOTE: The temperature can only be adjusted when
the degrees symbol "°" is flashing.
the temperature setting changes in increments of 5°c .
4 . press the symbol
on the temperature display .
5 . when the set temperature is reached the buzzer
will sound and the set temperature will be displayed .
NOTE: "FHU" cannot be selected if the oven
temperature is above the preset temperature.
as often as necessary, until the
is flashing .
as often as necessary, until the
is flashing . the "cook
as often as necessary, until
appears flashing .
is flashing . after 5 seconds
will appear on
. the
. the letters "fhu" will appear
Activating the child-proof lock
when the child lock is engaged, the oven cannot be
switched on .
1 . switch off the appliance using the
2 . press and – at the same time, hold until
the word "safE" is displayed .
the child-proof lock is now engaged .
NOTE: When the child-proof lock function is active the
time of day and minute minder can only be set.
releasing the child-proof lock
1 . press and – at the same time, hold until the word
"safE" is cleared from the display . the child-proof
lock is now released and the oven is ready to use .
Beep on touch
the beep sound can be activated anytime when a
symbol is pressed .
1 . Ensure the oven is off by pressing
2 . press and + simultaneously for 2 seconds,
a single beep will sound to confirm the operation .
repeat the above procedure to reset the beep on
touch mode . as default, the beep on touch
mode is off .
safety cut-out feature
the oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time . the oven switches
itself off after:
• 2 0 hours when set between 30°C and 120°C
• 8.5 hours when set between 120°C and 200°C
• 5.5 hours when set between 200°C and 250°C
Demonstration Mode – programmable controller
models
for display purposes, the appliance has a
demonstration mode to enable demonstration of
oven functionality without consuming power . In
demonstration mode, the display, the light and the fan
only are operational .
when the appliance is in demonstration mode and the
display is switched on, the clock symbol
If the appliance is in demonstration mode, to operate
the appliance normally the demonstration mode will
need to be deactivated .
.
to deactivate demonstration mode
1 . press symbol
mode .
2 . press simultaneously the timer symbol
5 seconds .
.
.
will be on .
until the display returns to stand by
and "-" for
15