Installation; Sd Card Installation - HIKVISION DS-2CD2612F-I(S) Quick Manual

Installation

Before mounting, please make sure that the device in the package is in good
condition and all the assembly parts are included.
Notes:
 Please make sure that the device in the package is in good condition and all
the assembly parts are included.
 Check the specification of the products for the installation environment.
 Make sure that all the related equipment is power-off during the installation.
 Check whether the power supply is matched with your AC outlet to avoid any
damage.
 If the product does not function properly, please contact your dealer or the
nearest service center. Do not disassemble the camera for repair or
maintenance by yourself.
 Please make sure that the wall is strong enough to withstand three times the
weight of the camera

SD Card Installation

Steps:
Rotate the TW M3X5 screw counterclockwise about 3 to 4 rounds to
loosen it. Slide the sun shield according to the arrow direction as shown in Figure
2-1(left).
Remove the sun shield according to the arrow direction as shown in
Figure 2-1(right).
Network Camera·Quick Guide
11