Change Default Router Settings (Not Recommended); Troubleshooting - NETGEAR DGN1000 Quick Start Manual

You will be required to enter your Network Key (Password) and 'connect' .
Please note the password is case sensitive.
Your router will now be connected and you will be able to access
the Internet.
Change Default Router Settings
(not recommended)
To access/change your Router's default settings and make changes (not
recommended for novice users):
Open a browser and go to routerlogin.com
1.
(or 192.168.0.1 alternatively).
Enter the default username and password, which is admin and
2.
password respectively.
ACN recommends keeping the Wi-Fi™ connection secured to block
unauthorised access to your network.

Troubleshooting

If you have any difficulties getting your router setup, please refer to the
support pages:
For user guides and manuals: acnpacific.com.au/user-guides.
For frequently asked questions (FAQs): acnpacific.com.au/adsl-support.
If you are still unable to resolve the issue please follow these quick steps:
1. Restart the modem router – turn off the power to the modem leave it
for about 5 minutes and turn the modem back on.
2. Isolate the modem router – remove all other equipment connected to
the line except your modem (including your splitter, telephone and any
other equipment.
3. Check the LED lights on the modem router – please refer to page 4.
7