Pioneer PDP-V401 Technical Manual page 107

3) Integrator mode
This mode offers an adjustment function for the integrator. This mode consists of various menu mode items and
additional settings for white-balance adjustment and various modes.
This mode may be entered only when powering on, within 3 seconds after the menu button is pressed.
When you enter Integrator mode, all data adjusted in Menu mode automatically returns to reset values (center
values), except for CLK. PHS.
Each of the adjustment modes is selected through the following buttons. This is common to all Integrator adjustment
modes.
(1) MENU button
Remote control : Restores normal operations mode from any screen in Menu mode.
Main body : Restores normal operations mode from any screen in Menu mode.
(2) SET button
Remote control : Returns to the previously selected items in the menu and hierarchy.
Main body : Returns to the previously selected items in the menu and hierarchy.
(3) UP/DOWN buttons
Remote control : Selects menu items.
Main body : None
(4) LEFT/RIGHT buttons
Remote control : Adjusts each item and selects settings for each item.
Main body : None
(5) +, – buttons
Remote control : None
Main body : Adjusts each item and selects settings for each item.
In Integrator mode, the following buttons are accepted, in addition to the buttons above.
(6) STANDBY/ON buttons
Remote control : Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the
Main body : Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the
(7) "AJY" and "POF" commands from the RS232C command set
"AJY" command : Exits Integrator mode and invokes RS232C command adjustment mode. Adjusted data is
"POF" command : Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the
4) RS232C adjustment mode
This mode is used to adjust quality, white balance, phase adjustment, and mode setting in personal control.
Some items are accessible only through this mode.
For details, see the description of 5.3 Outer control by RS232C in this manual.
Caution:
• When you enter Integrator and RS232C adjustment mode, all data adjusted in Menu mode (see the instruction
manual) take on center values, except for CLK.PHS.
• The adjusted values of CLK.PHS. are common to Menu mode, Integrator mode, and RS232C adjustment mode.
memory.
memory.
saved as last memory.
memory.
Before making adjustments
107
<Ver. 2.1>