Table of Contents
Advertisement
4 DIAGNOSTICS
Separable Security
This diagnostic displays information on the inserted M-CARD and CableCARD Interface
.
with the DCH
Field
CARD Interface
CableCARD ID
Host ID
Data ID
Validation
Pairing Rpt Method
Description
CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate 'Good' if a Native/Legacy resource is
established between the host and card, 'Error' if an error has occurred when
establishing the Native/Legacy resource, or 'Unsupported CARD' if the
inserted CableCARD is not a Motorola M-CARD in M-Mode.
The unique identifier provided by the CableCARD.
The unique identifier in the Host Device Certificate.
A value generated by the CableCARD for the Pairing report.
•
UKNOWN if a Validation message was not received by the
product.
•
VALID or INVALID as set by the Host Validation Message
received from the headend.
•
BINDING if the CableCARD is busy with the binding
authentication process.
•
NOT BOUND if Card validation status in not bound for
CableCARD reasons.
•
HOST CERTIFICATE INVALID if the status is not bound
because the Host Certificate was invalid.
•
HOST SIGN FAILED if status is not bound because of
failure to verify Host's SIGN.
•
AUTH KEY FAILED if status in not bound because of
failure to match AuthKey from the Host Device.
•
FAILED if binding failed for other reasons.
Set to 'MMI' or 'Reportback' as received by a message from the headed, or
32
Advertisement
Table of Contents
