Codegate; Streaming Presentation™ Mode - Honeywell Genesis 7580g User Manual

Left of
Presentation Centering
Window
®

CodeGate

When CodeGate is On, the trigger is used to allow decoded data to be transmitted to the host system. The scanner remains on,
scanning and decoding bar codes, but the bar code data is not transmitted until the trigger is pressed. When CodeGate is Off,
bar code data is transmitted when it is decoded. Default = CodeGate Off Out-of-Stand.
* CodeGate Off
Out-of-Stand
Streaming Presentation™ Mode
When in Streaming Presentation mode, the scanner's aimer goes out after a short time, but the scan illumination remains on all
the time to continuously search for bar codes. Two modes are available, Normal and Enhanced. Normal mode offers good
scan speed and the longest working ranges (depth of field). Enhanced mode will give you the highest possible scan speed but
slightly less range than Normal mode. Enhanced mode is best used when you require a very fast scan speed and don't require
a long working range.
Streaming Presentation Mode
- Normal
When using Preferred Symbology
Streaming Presentation Mode.
(page 3-14), a lower priority symbol must be centered on the aiming pattern to be read in
Right of Presentation Centering
Window
CodeGate On
Out-of-Stand
Streaming Presentation Mode
- Enhanced
3 - 9