Message Memory Check; Message Memory Transmission; Message Reception - Kenwood TH-78A Instruction Manual

5 Press a key (0 to 9) corresponding to the numeric
you want to enter to memory.
6 To cancel message input mode, press the PTT
switch.

3 Message Memory Check

1 Press and hold the F key for longer than one
second, then press the MESSAGE key.
2 Press a desired key (0 to 9).
3 To return to the normal frequency display, press any
key (except 0 to 9 key).

4 Message Memory Transmission

1 Press the PTT switch, then press the MESSAGE
key. The MESSAGE indicator will appear on the
display.
2 Hold down the PTT switch, and press a desired key
(0 to 9).
Note
Message transmission continues even if you
release the PTT switch during transmission.
46
3 You can perform steps 1 and 2 any number of times
during transmission. Therefore, if you use 10
message memory channels, you can transmit a text
of up to 60 characters.

5 Message Reception

1 When the DTSS or paging function is on, press the F
key, then the MESSAGE key.
2 The MESSAGE display lights, and you can now
receive a message.
When a message is received, it is displayed, and the
MESSAGE indicator flashes.
n
DTSS mode