Tx. Stop Function; Time Out Timer - Kenwood TH-78A Instruction Manual

No indicator means the high power position has been
selected. Use high power for maximum transmitter
power.
See the high power CAUTION on page 5.
Output Power(watts)
144MHz
H
2.0
PB-13,18
5.0
2.0
Alkaline Battery
5.0
18
(Apprrox.)
430/440MHz
L EL H L
0.5 0.02 2.0 0.5 0.01
0.5 0.02 5.0 0.5 0.01
0.5 0.02 2.0 0.5 0.01
0.5 I 0.02 5.0 0.5 0.01

3 TX. Stop Function

The TX Stop function allows you to temporally
disable the transceiver transmit, preventing
accidental or unauthorized transmission.
Press the F key, then press the f
the TX. Stop function on or off.
EL
4 Time-Out-Timer
This transceiver has a time-out-timer function to
prevent possible problems caused by continuous
transmission. This function forcibly stops continuous
transmission after 10 minutes. When the timer times
out, the transceiver beeps and automatically returns
to the RX mode. Press the PTT switch to transmit
again.
The time-out-timer function cannot be turned on or
off.
2
/TX.S key to turn
TX.S