Names And Functions Of Parts - Kenwood KRF-V6300D Instruction Manual

Names and functions of parts

Main unit
SPEAKERS A/B/OFF
PHONES
1
(power) key
Standby indicator
Switch the unit ON and standby.
When the unit is in standby mode, the
standby indicator is lit.
2
Display
3
Surround LED indicators
DOLBY DIGITAL indicator
Light when in the Dolby Digital mode.
DTS indicator
Light when in the DTS mode.
STRAIGHT DECODE indicator
Light when in the STRAIGHT DECODE
mode.
ACTIVE EQ indicator
Light when in the ACTIVE EQ mode.
4
Remote sensor
5
VOLUME CONTROL knob
6
PHONES jack
Use for headphone listening.
7
SPEAKERS A/B/OFF key
Use to select the front speaker, or
select not to use the front speaker.
8
LISTEN MODE knob
Use to select the listen mode.
9
MULTI CONTROL knob
Use to control a variety of settings.
0
SETUP key
Use to set up this unit.
!
EASY SETUP key
Use for easy setup of the speakers.
@
SOUND key
Use to adjust the sound quality and
ambience effects.
6
KRF-V6300D
MULTI CONTROL
SETUP
LISTEN MODE
EASY SETUP
#
MEMORY key
Use for manual memory of radio
stations.
$
BAND key
Use to select the broadcast band.
%
AUTO/MONO key
Use to select the auto tuning or
manual tuning mode.
Use to select a recording mode. °
^
STRAIGHT DECODE key
Use to switch the straight decode
mode on/off.
&
DIMMER key
Use to switch the brightness of the
display and indicators.
*
INPUT MODE key
Use to select the input mode.
(
ACTIVE EQ key
Use to select ACTIVE EQ setting.
)
INPUT SELECTOR knob
Use to select the input sources.
¡
PURE AUDIO MODE key
PURE AUDIO MODE indicator
Use to switch the PURE AUDIO MODE
¤
ON/OFF.
When this mode is on, the PURE
AUDIO MODE indicator is lights up.
™
AV AUX key
™
Use to select AV AUX source.
£
AV AUX jack
¡
Use to connect a device such as a
camcorder and a game player.
·
DOLBY STRAIGHT
DIGITAL DTS
DECODE ACTIVE EQ
INPUT SELECTOR
SOUND BAND STRAIGHT INPUT MODE
DECODE
MEMORY AUTO/MONO DIMMER ACTIVE EQ
fi
›
¶
w
§
·
•
VOLUME CONTROL
AV AUX
PURE AUDIO MODE
VIDEO L-AUDIO-R
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.