Using The Rds Display Key (For The U.k. And Europe Only); Presetting Rds Stations (Rds Auto Memory); (For The U.k. And Europe Only) - Kenwood KRF-V4060D Instruction Manual

Listening to radio broadcasts

(For the U.K. and Europe only)

Using the RDS DISPLAY key
Pressing the RDS DISPLAY key changes the contents of the
display.
Each press switches the display mode as follows:
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
1 PS (Program Service name) display:
The station name is displayed automatically when an RDS broadcast
is received.
If no PS data was sent, "NO PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the display.
"NO RT" or "RT----" is displayed if the current RDS station does not
provide RT data.
3 Frequency display:
Displays the frequency of the current station.
24 EN
RDS DISPLAY
(For the U.K. and Europe only)
Presetting RDS stations
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS AUTO MEMORY function.
MEMORY
BAND AUTO
1
Use the INPUT SELECTOR knob to select the tuner.
2
Use the BAND key to set the broadcast band to "FM".
3
Press and hold the MEMORY key for more than 2 seconds.
• After a few minutes, up to 40 RDS stations are preset in order from
channel "01".
• Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15
RDS stations, the stations currently preset at numbers 01~15 will
be replaced by the RDS stations.)
(RDS AUTO MEMORY)
INPUT SELECTOR