Digital Connections - Kenwood KRF-V4060D Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
VIDEO
DVD
IN
VIDEO 2
IN
VIDEO 1
IN
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".)
DE-
SYSTEM
DVD
EMPHASIS CONTROL
CHANNEL
GND
SPACE
CD / DVD
OPTICAL
FM VIDEO 2
AM
75Ω 50µs 75µs
COAXIAL
AM 9kHz AM 10kHz
ANTENNA FM 50kHz FM 100kHz DIGITAL IN
AUDIO DVD / 6CH INPUT
CENTER
MONITOR
OUT
L
R
SUB
PHONO CD / DVD REC OUT PLAY IN REC OUT PLAY IN PLAY IN DVD FRONT SURROUND
WOOFER
VIDEO 1 MD / TAPE VIDEO1 VIDEO 2
OUT
GND SUB WOOFER
DVD
CD / DVD
OPTICAL
VIDEO 2
COAXIAL
DIGITAL IN
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
AC OUTLETS
AC110V-120V / 220V-240V~
FRONT CENTER SURROUND
SPEAKERS SPEAKER SPEAKERS
50 / 60Hz
(8-16Ω) (8-16Ω) (8-16Ω)
SWITCHED
TOTAL 90W MAX.
+ +
- -
R L C R L
RED WHITE GREEN GRAY BLUE
PRE OUT
SPEAKERS
COAXIAL DIGITAL OUT
(AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
CD or DVD player
AC 220-
240V~
AC 110-
120V~
VOLTAGE
SELECTOR
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
8
0
11 EN