Touch Sensor Tone; Manual Time Adjustment; Automatic Time Adjustment; Power Off Timer - Kenwood KRC-15RG Instruction Manual

Touch Sensor Tone

This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Display and setting:
"BEEP ON" : Beep setting is on.
"BEEP OFF" : Beep setting is off.
NOTE
The beep sound is not output from the preout jacks.

Manual Time Adjustment

Adjust the time manually.
NOTE
This adjustment is available only when the automatic time
adjustment is set to off.
Display and setting:
1
Select the display "CLK ADJ" during the selecting function in
the menu system.
2 Hold down either the 4 or ¢ button for two seconds or
more to enter the Manual time adjustment mode.
The time display will blink.
3
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.

Automatic Time Adjustment

With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment function
is turned off. The factory default is automatic time adjustment.
Display and setting:
"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment
Adjusting Time Automatically:
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
NOTE
The time is not adjusted when the RDS station you are tuned to is
not transmitting a time signal. Choose another RDS station in
such a case.

Power OFF Timer

Set the time for the OFF Timer function activated when you
selected Standby mode.
If the predefined time elapses, this unit's power is
automatically turned off.
Display and setting:
"OFF ___" :Power OFF Timer function is canceled.
"OFF 20M" :Unit's power goes OFF after 20 minutes.
"OFF 40M" :Unit's power goes OFF after 40 minutes.
"OFF 60M" :Unit's power goes OFF after 60 minutes.
NOTE
The factory default is "OFF 20M" .
— 21 —