Setting Up The Grc According To The Option Components (Set Up) - Kenwood C-V351 Instruction Manual

Setting up the GRC according to the option components
The following procedures prepare the GRC for operating the
components connected through system control cords. Make
sure that these components are connected through system
control cords.
÷ If you proceed to the following "Set Up" operations immediately after steps 1 to 4 of "Model Type
Setup (GRC setup procedure)" on page @, start operation with step "3 Select the CD icon" in
the "Set Up CD" procedure.
Set Up CD
Setup of GRC according to the
CD player in use
1 Select the "Set Up" icon.
Set Up
2 Press the "ENTER" key to enter the
selection.
ENTER
3 Select the "CD" icon.
C D
4 Press the "ENTER" key to enter the
selection.
ENTER
5 Select the "Single" icon.
Sin g le
÷ Select "Single", "Dual", "Carrousel" or
"Changer" according to the connected
CD player type.
6 Press the "ENTER" key to enter the
selection.
ENTER
7 Select the "Main Menu" icon.
Main
Menu
8 Press the "ENTER" key to enter the
selection.
ENTER
÷ Icon
appears at the moment the setup
has completed.
In the operations of the GRC (Graphical Remote
Control unit), proceed to each step within 10
seconds after the previous step.
The display disappears in 10 seconds.
To resume GRC display, move the Joy-
stick key in any directions.
7
Set Up Tape 1
Setup of GRC according to the
cassette deck in use
1 Select the "Set Up" icon.
Set Up
2 Press the "ENTER" key to enter the
selection.
ENTER
3 Select the "Tape 1" icon.
Tape1
4 Press the "ENTER" key to enter the
selection.
ENTER
5 Select the "Dual" icon.
Dual
÷ Select "Dual" or "Single" according to
the connected cassette deck type.
6 Press the "ENTER" key to enter the
selection.
ENTER
7 Select the "Main Menu" icon.
Main
Menu
8 Press the "ENTER" key to enter the
selection.
ENTER
÷ Icons
/ or icon
moment the setup has completed.
Setup of the Graphical Remote Control (GRC) unit
Main operation menu
Set Up LD
Setup of GRC according to the
LD player in use
1 Select the "Set Up" icon.
2 Press the "ENTER" key to enter the
selection.
3 Select the "LD" icon.
L D
4 Press the "ENTER" key to enter the
selection.
5 Select the "System Control" icon.
System Control
÷ Select "System Control" or "IR" ac-
cording to the connected LD player type.
6 Press the "ENTER" key to enter the
selection.
7 Select the "Main Menu" icon.
8 Press the "ENTER" key to enter the
selection.
÷ Icon
appears at the moment the setup
appear at the
has completed.
For C-V351
C-V351/C-V301 (EN)
(Set Up)
Main
ENTER
Menu
CD Tuner TapeA TapeB TV VCR1 VCR2
Return Confirm Set Up
VOLUME
DVD MD LD Tape1 Cable Sat.
Setup
C D L D Tape1 VCR1
Sat. T V Cable VCR2
M D
DVD MUTE
Sound Reset
ON/STANDBY
Set Up
ENTER
ENTER
ENTER
Main
Menu
ENTER
13