Connecting Audio Components - Kenwood VR-209 Instruction Manual

Make connections as shown below.
When connecting the related system components, be sure
to also refer to the instruction manuals supplied with the
components you are connecting. ;
Do not connect the power cord to a wail outlet until ail
connections are completed.
Microcomputer malfunction
If operation is not posstple or an erroneous display appears, even
though all connections nave been made properly. reset the micro-
computer referring to "In case of difficulty". - 21
Caution regarding placement (Except for U.S.A. and Canada)
To maintain proper ventilation. be sure to leave a space around the
unit (from the largest outer dimensions, inciuding projections) equal
io, or greater than shown below
Left and right panels: 10 cm, Rear panel: 10 cm, Top panel: 50 cm
Notes
1.Connect atl cords firmly Loose connections may prevent proper
SOUR transmission or produce noise.
2. Be sure to remove the power cord from the AC outlet before plugging
or unplugging any connection cords. Plugging / unplugging connec-
tion cords without disconnecting the power cord can cause malfunc-
fons and may damage the unit.
3 Do not connect power cords from components whose power con-
sumption is larger than what is indicated on the AC outlet at the rear
of this unit.
V¥R-209/208/KRF V8010BN7T510D 1En/KM;
Connecting audio components
SEROMA RSS ELE SRI LE
sca
LEAS
Snape of AC outlets
U.S.A. and Canada
Australia
Other countnes
SYSTEM CONTROL
jacks 9;
Cassette deck or
graphic equalizer
t ~(i6!
Cassette deck or
MD recorder
Record player