Kenwood HD20GA7 Quick Start Manual

Specifications
Built-in battery ....................................... Lithium ion rechargeable battery
Weight (Net) .............................................................. Approx. 140g (0.31 lb)
Dimensions
W x H x D [excluding projections]
...................... 61 mm (2-2/3") x 104 mm (5-1/2") x 17 mm (11/16")
W x H x D [including projections]
................ 61 mm (2-2/3") x 104.2 mm (5-1/2") x 17.6 mm (11/16")
DIGITAL AUDIO PLAYER
Recording medium (Built-in hard disk drive) *1 ........... 1.8 inches, 20 GB
HD20GA7
USB jack ............................................................................. USB 2.0/ USB 1.1
Headphone output ..................................................... 6 mW + 6 mW (16 Ω)
Display *2 ....... 2.2-inch QVGA low-temperature polysilicon TFT color LCD
QUICK START MANUAL
POINT :
Frequently Asked Questions (FAQ):
*1 One GB (gigabytes) is equal to 1,000,000,000 bytes. The actual ca-
pacity after formatting may be smaller than the nominal capacity. The latest information can be found in the FAQ. Please consult
the FAQ section on the KENWOOD website of your resident
*2 The LCD monitor is fabricated with high accuracy, but some pixels may
country.
be permanently lighted or extinguished. This is not malfunction.
(if necessary you can find a link to your local website on
AC adaptor (AC-050150A) :
www.kenwood.com
Power supply ........................................................................... AC 100-240 V
<http://www.kenwood.com>).
Rated output .............................................................................. DC 5V 1.5 A
¶
KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
¶
The full performance may not be exhibited in an extremely cold loca-
tion (under a water-freezing temperature).
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your dealer for information or service on this product.
Model Serial Number
B60-5597-00 00 (E)
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for EU
countries that have adopted separate waste
collection systems)
Safety precautions
Caution: Read this page carefully to ensure safe operation.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions should
be retained for future reference.
Heed Warnings – All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions – All operating and use instructions should be
followed.
1. Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
2. Attachments – Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
3. Water and Moisture – This product shall not be exposed to
dripping and splashing – for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swim-
ming pool; and the like.
4. Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing seri-
ous injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer. Any mounting of the product should follow
AP 0502
the manufacturer's instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combina-
tion to overturn.
5. Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the product and
Products with the symbol (crossed-out
to protect it from overheating, and these openings must not be
wheeled bin)cannot be disposed as
blocked or covered. The openings should never be blocked by
household waste.
Old electrical and electronic equipment placing the product on a bed, sofa, rug, or other similar surface.
should be recycled at a facility capable of
This product should not be placed in a built-in installation such as
handling these items and their waste
a bookcase or rack unless proper ventilation is provided or the
byproducts.
manufacturer's instructions have been adhered to.
Contact your local authority for details in
locating a recycle facility nearest to you. 6. Power Sources – This product should be operated only from
Proper recycling and waste disposal will help
the type of power source indicated on the product. If you are not
conserve resources whilst preventing
sure of the type of power supply to your home, consult your prod-
detrimental effects on our health and the
uct dealer or local power company.
environment.
7. Power Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the product.
8. Lightning – For added protection for this product during a light-
ning storm, or when it is left unattended and unused for long pe-
riods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
9. Overloading – Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk of
fire or electric shock.
With the Home view displayed, press
3
the multi-control (Up/Down) button to
select a item ([ARTIST], [ALBUM],
[GENRE] or [FOLDER]), and press the
multi-control (Right) button.
Pressing the multi-control (Up/Down) button
deeply scrolls the displayed items at a high
speed.
10.Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or elec-
tric shock. Never spill liquid of any kind on the product.
11.Servicing – Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualified service per-
sonnel.
12.Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel under
the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
Press the multi-control (Up/Down)
4
c) If the product has been exposed to rain or water,
button to select the desired item or
d) If the product does not operate normally by following the
audio data.
operating instructions.
When a item is selected and the multi-
e) If the product has been dropped or damaged in any way,
control (Right) button is pressed, the list
and of item or audio data in the selected item
is displayed.
f) When the product exhibits a distinct change in perform-
ance – this indicates a need for service.
g) If an abnormal smell or smoke is detected.
13.Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts speci-
fied by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
14.Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
POINT :
To return to the previous display page,
15.Wall or Ceiling Mounting – This product should be mounted
press the multi-control (Left) button.
to a wall or ceiling only as recommended by the manufacturer.
16.Heat – This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other prod- Press the multi-control (Center) button.
5
ucts that produce heat. Do not place a flaming object, such as
The selected item or audio data will be played
a candle or lantern, or near the product. in accordance with the current playback
mode setup.
17.Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
POINT :
If steps 3 to 5 are performed in the middle of
playback, the current playback is stopped and
the newly selected item or audio data is
played back.
Stopping playback temporarily (Pause) 7 Skipping to the previous or
next audio data
Press the multi-control (Center)
1
button during playback.
With the Play view displayed during
1
playback or pause, press the multi-
Pressing the multi-control
control (Up/Down) button.
(Center) button to resume
playback.
POINT :
¶ When the played item contains multiple
audio data or after playback is stopped
Multi-control (Up) button:
completely, it may take a few seconds
Pressing the multi-control (Up) button im-
before playback starts after the multi-
The list of the con-
control (Center) button is pressed. mediately after the start of playback of
tents of the selected
audio data (while the track count is be-
¶ When about 3 minutes have passed after
item is displayed.
tween 0:00 and 0:02) skips to the begin-
playback has paused, the player will auto-
ning of the previous track.
matically turn off the power.
Pressing the multi-control (Up) button in
the middle of playback (while the track
count is 0:03 or after) skips to the begin-
Adjusting the volume 8
ning of the current audio data.
Multi-control (Down) button:
Press the volume (+/-) button.
1 Pressing this button to skip to the beginning
of the next audio data.
¶
Holding the multi-control (Up/Down)
button depressed during pause con-
tinues the skipping until the button is
released.
POINT :
Open the [MENU] view and select [SKIP+
FOLDER] to skip to the next item or select
[SKIP- FOLDER] to skip to the previous item.
Volume (+) button:
Press to increase the volume.
To turn off -
Volume (-) button:
Press to decrease the volume.
Press and hold the
1
Fast forwarding/fast
more than 2 seconds.
reversing audio 9
Viewing the PDF INSTRUCTION
With the Play view displayed during
1
MANUAL =
playback, press and hold the multi-
control (Up/Down) button for more
When the application software is installed in
than 1 second.
the PC, the [PLAYER] and [Kenwood Media
Application] INSTRUCTION MANUAL are also
installed. The Adobe Reader for use in reading
these PDF files should be prepared separately.
These manuals are stored in the [Program Files]
\ [KENWOOD] \ [HD20GA7] \ [MANUAL], pro-
vided that the default installation destination is not
modified.
Click on [Start] \ [All Programs] \
1
Multi-control (Up) button: [KENWOOD] \ [HD20GA7] \ [MANUAL].
Press lightly: Low-speed (x20-speed
equivalent) fast reverse. The Adobe Reader is launched and the
Press deeply: High-speed (x50-speed
[PLAYER], [Kenwood Media Application]
equivalent) fast reverse.
INSTRUCTION MANUAL is displayed.
Multi-control (Down) button:
Press lightly: Low-speed (x20-speed
equivalent) fast forward.
Press deeply: High-speed (x50-speed
equivalent) fast forward.
0
/ button for