General Maintenance; Battery Pack Removal And Preparation For Recycling - RIDGID 140446001 Operator's Manual

12 volt lithium-ion battery charger
Table of Contents

Advertisement

MAINTENANCE
WARNING:
When servicing use only identical RIDGID
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with
side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a
dust mask.
WARNING:
To avoid serious personal injury, always remove
the battery pack from the tool when cleaning or
performing any maintenance.
BATTERIES
This product will accept  V lithium-ion batteries. Length
of service from each charging will depend on the type of
work you are doing.
Batteries for this product have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
n Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 0 days:
n Store the battery pack where the temperature is below
80°F and away from moisture.
n Store battery packs in a 0%-50% charged condition.
n Every six months of storage, charge the pack as
normal.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
®
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at a RIDGID
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
Li - Ion
WARNING:
Upon removal, cover the battery pack's terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove any
of its components. Lithium-ion batteries must be
recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body
parts as short circuit may result. Keep away from
children. Failure to comply with these warnings
could result in fire and/or serious injury.
6
authorized service center.
®
To preserve natural resources, please
recycle or dispose of batteries properly.
This product uses lithium-ion batteries.
Local, state or federal laws may prohibit
disposal of batteries in ordinary trash.
Consult your local waste authority for
information regarding available recycling
and/or disposal options.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R86049

Table of Contents