Advertisement
Make the settings to use AQUOS
LINK. Set the settings
with "Setup" > "Advanced"
> "AQUOS LINK Setup".
Select AQUOS LINK Control to disable the AQUOS
LINK
function even when an AQUOS
LINK-compatible
HDMI
device is connected
to the TV. This function prevents the
device from starting to operate unexpectedly.
If this is activated, the One Touch Play function is enabied.
While the TV is in standby mode, it automatically
turns on
and plays back the image from the HDMI source.
This function can be set for each input terminal.
The remote control unit of the TV can be used to select the
channel, display
program information,
and perform other
operations
of the connected AQUOS
LINK-compatible
equipment.
This function allows you to listen to the TV audio via audio
equipment without using an optical fiber cable, which
conventionally
is required.
Requirements
for using an ARC-compatible
AV
amplifier:
• ARC-compatible
AV amplifier connected
to the ARC-
compatible HDMI IN terminal.
EQ/LE650U/C6500U/LE642U
series:HDMI
IN 1
UQ/TQ/SQ/LE657U
series:HDMI
IN 3
(Refer to the operation manual of the ARC-compatible
equipment for details.)
• Use of an ARC-compatible
cable.
Auto:
You can listen to the TV audio with ARC-compatible
audio equipment.
Off: This function does not work.
• If the TV audio cannot be output from the AV amplifier
even after making the necessary
settings, connect the
TV to the AV amplifier with an optical fiber cable and
select "Off".
ENG 7-2
Advertisement
