Download Print this page

Sharp Aquos UQ17U Operation Manual page 70

Advertisement

• The TV screen may temporarily
become black when the
TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
2 Turn on the 3D Glasses and place them on your head.
3 You can now view 3D images.
4 Press 2D/3D during the 3D mode.
Select "Yes" and press ENTER to switch to 2D mode.
• Take off the 3D Glasses
and turn off the power.
The image signal may contain a 3D identification
signal. You
can enable the TV to automatically
detect the 3D image type
by selecting
"Setup" > "3D Setup" > "3D Auto Change" on
the TV.
(See Daae 5-11._
1 When
"3D Auto Change"
is set to "Mode
1" or "Mode
2"
• The 3D image type is detected automatically
and the
appropriate
3D image is displayed.
5 Take off the 3D Glasses
and turn off the power.
• If the input signal switches to 2D, 2D images are
displayed automatically.
• 3D mode is canceled automatically
when the setting is
changed, input selection
is changed,
or the power is
turned off.
When
"3D Auto Change"
is set to "Off"
• The following message is displayed. Press 2D/3D.
• Press _t#
to select the "Yes", and then press ENTER.
ENG 5-8

Advertisement

loading