External Speaker; Pa (Public Address) - Cobra 25 NW ST Operating Instructions Manual

Operation

External Speaker

External Speaker
The external Speaker jack is used for remote
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and be
FCC ID:BBO3K229LTD
COBRA
rated to handle at least 4.0
MADE IN CHINA
watts. When the external speak-
ODUCT OF
er is plugged in, the internal
P. CHICAGO, ILL.60707
speaker is automatically discon-
nected.
Note
1 Connect an external speaker to the external
Cobra external speakers are
speaker jack on the rear panel.
rated at 15 watts.
20
ANT
PA.SP. EXT.SP.
+ –
POWER

PA (Public Address)

ANT
FCC ID:BBO3K229LTD
COBRA PA.SP. EXT.SP.
MADE IN CHINA
RODUCT OF
P. CHICAGO, ILL.60707
Connect an external PA speaker to the PA jack
1
on the rear panel.
25 NW ST
RF
SIG 1 3 5 7 9 +30dB
O F F
M I N
2 Set CB PA switch to PA position.
Operation
PA (Public
Address)
Note
+ –
POWER
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel
will be heard through the PA
speaker. Adjust Volume Control
for normal listening level.
M A X M
21