Explanation Of Frt By Using An Example; How To Refer To The Service Item By Using The Sample - Honda 18VJ9B01 Instructions For Use Manual

Explanation of FRT by using an example

(The example may differ from the actual presented items)
1
Ref.
L.O.N.
No.
2 1111L1
1111L1A
Reference No. of the illustration of part that shows location
of the replacement work.
FRT is an abbreviation of Flat Rate Time indicating the
standard service time required for the replacement.
LON is an abbreviation of Labor Operation Number, and it
is a classification of the service items by the work unit code.
The same operation
models.
Standard operation is indicated with 6 digits code, and
additional operation is indicated with 7 digits code.
Indicating the intake valve replacement and FRT4.1.
Indicating FRT1.4 that will be added when additional
operation (whole intake side of one cylinder head) is done
in association with intake valve replacement.
10
(Relative ref. Number)
F.R.T.
Description
(1, 3, 4, 7)
VALVE, INTAKE • • • • • • • • • • • • • 4.1
• NOTE: OHV type
• Includes: Engine removal and installation
One head (intake all) add
• • • • • • • • • • • • • • • • • • • • • • • • • 1.4
code is used regardless of the
Indicating work condition or application condition of the
service item.
Indicating work contents that are included in the service
item.
Indicating a reference No. whose operation and time are
the same as FRT4.1 for the intake valve.
(The application range is limited to the service items
without an LON setting within a same block.)

How to refer to the service item by using the sample

(intake valve replacement)
Open to the page of the block where the intake valve's
spare part illustration is shown.
Look for the intake valve illustration, and refer to the ser-
vice item and FRT that agree with the reference No.
2010.06.01 E
B10