Table of Contents
Advertisement
3. Align the document with the rear left corner of the
scanner glass (arrow marks). The markings on the
scanner border for the A4 and A5 formats will help
you to position the document correctly.
Enlarge Detail
If you would like to copy a detail (such as a
graphic) of your document, position the
document so that the detail view is close to
the source . Using the zoom function, you
can separate the desired area from rest of
the document.
4. Close the scanner cover.
Adjust Scanner Cover
The scanner cover is equipped with adjusta-
ble hinges, allowing you to lay even thicker
documents (e.g. books) in the flatbed scan-
ner. Carefully lift the scanner cover so that it
rests as evenly as possibly.
Use clear sheets of plastic when copying
three-dimensional objects (e.g. coins, flow-
ers) to avoid damaging the scanner glass.
CAUTION!
Do Not Press on the Scanner
Cover!
Do not press forcefully on the scanner
cover when you scan thicker documents
or three-dimensional items, this could
damage the scanner cover and/or the
scanner glass.
Copier · Make Copy Using Standard Settings
Make Copy Using Standard
Settings
· Make Copy Using Standard Settings
Starting Mode
In the starting mode, the selected settings for resolu-
tion, magnification/reduction factor, selected paper size
and simplex or duplex appear in the display.
1. Insert the document.
2. Press COPY twice. The copy is created.
ECO button
ECO Button
Press COPY and ECO to make a copy using
the toner saving function.
Making a Copy
Access Function
You can also call the function by pressing C,
11 and OK.
Modifying the Settings
Settings for the Next Print Job
Settings for the Next Print Job
Using this function, select the settings for the
next print job. Change the basic settings using
the functions of chapter Settings (see also chap-
ter Settings, page 51).
Set Resolution
Set Resolution
Press f. The configured resolution appears on the dis-
play. Press f again to change the setting. You can
choose between:
AUTO—Optimised adjustment for all types of docu-
ments
TEXT—For texts with small print or drawings
QUALITY—For documents with many details
PHOTO—For the highest resolution
Set Resolution
Modifying the Basic Settings
Modify the basic setting by pressing C,
103 and OK.
Setting the Zoom Parameter
1. Press Ô/ZOOM. The magnification/reduction fac-
tor appears on the display.
2. Select the desired setting using [. Standard values
are saved, for example, for compressing A4 to A5
or for adjusting the European DIN formats to
American letter and legal formats
3. Confirm with OK.
Select One Side/Both Side Printing
(Simplex/Duplex)
Select One Side/Both Side Printing (Simplex/Duplex)
Press Õ/DUPLEX, to select double sided printing
(Duplex). Press Õ/DUPLEX, twice to select single
side printing (Simplex).
Select One Side/Both Side Printing (Simplex/Duplex)
Modifying the Basic Settings
Modify the basic setting by pressing C,
101 and OK.
Adjust contrast
1. Press ¬.
EN
31
Advertisement
Table of Contents
