Table of Contents
Advertisement
2. Lay the document onto the scanner glass with the
written side down.
EN
3. Align the document with the rear left corner of the
scanner glass (arrow marks). The markings on the
scanner border for the A4 and A5 formats will help
you to position the document correctly.
Enlarge Detail
If you would like to copy a detail (such as a
graphic) of your document, position the
document so that the detail view is close to
the source . Using the zoom function, you
can separate the desired area from rest of
the document.
4. Close the scanner cover.
20
Adjust Scanner Cover
The scanner cover is equipped with adjusta-
ble hinges, allowing you to lay even thicker
documents (e.g. books) in the flatbed scan-
ner. Carefully lift the scanner cover so that it
rests as evenly as possibly.
Use clear sheets of plastic when copying
three-dimensional objects (e.g. coins, flow-
ers) to avoid damaging the scanner glass.
CAUTION!
Do Not Press on the Scanner
Cover!
Do not press forcefully on the scanner
cover when you scan thicker documents
or three-dimensional items, this could
damage the scanner cover and/or the
scanner glass.
Scan Document and Save to
a Computer
· Scan Document and Save to a Computer
Introduction
Using this function, scan a document with your device
and transfer it onto a computer which is connected di-
rectly to the device using a USB cable.
Start Scanning from Computer
Start Scanning from Computer
Using the Companion Center SFX software,
you can call up the scan on the computer. You
can also start the scanning process from any
other graphics program if it is supported by the
Twain Driver. Select the Twain Scanner Driver
as your scanner.
Make Scans Using Standard
Settings
1. Press SCAN.
2. Select with [SCAN-> PC USB.
3. Confirm with OK.
Access Function
You can also call the function by pressing C,
31 and OK.
4. Press OK.
Make Scans Using User-defined
Settings
1. Press SCAN.
2. Select with [SCAN-> PC USB.
3. Confirm with OK.
4. Select with [SETTINGS.
5. Confirm with OK.
Access Function
You can also call the function by pressing C,
31 and OK.
Philips · LaserMFD 6170dw
Advertisement
Table of Contents
