Table of Contents
Advertisement
Treble level
"Treble"
Balance
"Balance"
Fader
"Fader"
Volume offset
"V Offset"
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 6 & 6x9 in. speaker
For 5 & 4 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
–8 — ±0
Display
"SP OFF"
"SP 6*9/6inch"
"SP 5/4inch"
"SP O.E.M."
— 7 —
Switching Display
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Frequency
Station name
In Tape source
Information
Play side & Tape counter
Play side & Tape running
Play side
In External disc source
Information
Track Time
Disc name
Disc title
Track title
Display
"SNPS"
Display
"DNPS"
"D-TITLE"
"T-TITLE"
Advertisement
Table of Contents
