Table of Contents
Advertisement
9. Press [ESC] key 2 times, appear next message.
Select "Yes", press [Enter] key.
Finish for channel A.
10. Press [ESC] key.
Select channel B and change same as channel A.
11. Finish setting for channel B(finish Item 9), press
[ESC] key 2 times.
Appear message of finish.
Select "Yes", and press [Enter] key.
12. Appear "Please press any key to reboot", press
any key.
Setting is finish and auto reboot.
16
When AHA-3940AUWD is the SCSI board
used
1. Power On.
2. Appear next comment when Boot Up.
Adaptec AHA-3940AU/AUW/AUWD SCSI BIOS v1.xx
(c) 199x Adaptec, Inc. ALL Rights Reserved.
<<< Press <Ctrl><A> for SCSISelect(TM)Utility! >>>
3. Quickly press [Ctrl]+[A] keys when appear this com-
ment.
4. Run SCSI Utility and appear next window.
Use arrow key, select Channel(A or B), and press
[Enter] key.
You must change configuration both Cannel A and B.
5. Appear Menu window.
Select "Configure/View Host Adapter Setting", and
press [Enter] key.
Advertisement
Table of Contents
