NEC SL1100 Features And Specifications Manual page 189

ISSUE 2.0
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1. Press Conf softkey or Conf key (PRG 15-07 or SC 751: 7).
2. Dial Split service code (794).
Repeat this procedure to alternate between the remaining parties in the Conference. Press the Conf
softkey or Conf key twice to set up the Conference again.
Single Line Terminal
1. Hookflash and dial 794.
Repeat this procedure to alternate between the remaining parties in the Conference. Hookflash twice
to set up the Conference again.
To drop an outside call from the Conference:
1. Press Hold key to place the conference call on hold.
2. Hang up.
The lines involved in the Conference ring back separately to the telephone.
3. Answer and disconnect the unwanted outside call.
4. To re-establish the Conference, answer the remaining call by pressing Conf softkey or Conf key
after each call is answered. Press Conf softkey or Conf key twice when all calls have been
answered.
To exit a Conference without affecting the other parties:
Multiline Terminal
1. Hang up.
If you press Hold key while on a call with two outside callers, the outside callers hear what is
programmed in PRG 10-04-01.
Single Line Terminal
Features and Specifications Manual
SL1100
C
1-177