Connecting The Bathroom Speakers; Connecting Through The Variable Output - Samsung HG22EA470UW Installation Manual

You can connect the Bathroom Speakers in the following method.
Connecting through the Variable Output (available without an external amplifier)
¦
1. Connect the VARIABLE AUDIO OUT
Speaker +
Speaker -
2. Connect the VOL-CTRL
✎
The maximum speaker output is 4W, 8Ω.
y Installing the Volume Control
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers.
– The jack that is connected from the Volume Control Box to the TV is a 3.5mm normal Phone jack.
– Volume Control Box switch consists of Tact switch.
✎
Setting the Sub AMP Mode
– 0: Turns the Sub AMP function off (PWM off).
– 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined according
to the Power On Volume, the Min Volume, and the Max Volume values of the Hotel Mode.
– 2: Determines the volume according to the bathroom control panel setting.
14
English
[Hotel-XC]Install Guide-ENG.indd 14

Connecting the Bathroom Speakers

TV Rear Panel
port of the TV to the Bathroom Wall Speakers of the hotel.
N/C
jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
1
Speaker
2
Volume Control Box
VOL+
VOL-
2012-03-30 1:27:47