Stacking And Nsf Usage Scenarios; Basic Failover - Dell Networking N4000 Series Configuration Manual

Stacking and NSF Usage Scenarios

Only a few settings are available to control the stacking configuration, such as
the designation of the standby unit or enabling/disabling NSF. The examples
in this section describe how the stacking and NSF feature act in various
environments.
This section contains the following examples:
•

Basic Failover

• Preconfiguring a Stack Member
• NSF in the Data Center
• NSF and VoIP
• NSF and DHCP Snooping
• NSF and the Storage Access Network
• NSF and Routed Access
Basic Failover
In this example, the stack has four members that are connected in a ring
topology, as Figure 9-11 shows.
Figure 9-11. Basic Stack Failover
Managing a Switch Stack
195