Command
CTRL + Z
show ip interface vlan 1 Display network information for VLAN 1.
Managing DHCP Leases
Beginning in Privileged EXEC mode, use the following commands to manage
and troubleshoot DHCP leases on the switch.
Command
show dhcp lease
interface
interface [
show ipv6 dhcp interface
interface
vlan [
]
debug dhcp packet
debug ipv6 dhcp
ipv6 address
prefix/prefixlien
{[
autoconfig | dhcp}
ipv6-
ipv6 gateway
address
ipv6 enable
show ipv6 interface out-
of-band
162
Setting Basic Network Information
Purpose
Exit to Privileged EXEC mode.
Purpose
Display IPv4 addresses leased from a DHCP server.
]
Display information about the IPv6 DHCP information
for all interfaces or for the specified interface.
Display debug information about DHCPv4 client activities
and to trace DHCPv4 packets to and from the local
DHCPv4 client.
Display debug information about DHCPv6 client activities
and to trace DHCPv6 packets to and from the local
DHCPv6 client.
Set the IPv6 address of the management interface or
] |
enables autoconfiguration or DHCP .
Set the IPv6 default gateway address.
Enable IPv6 functionality on the interface.
Show settings for the interface.