Operation - Makita 6842 Instruction Manual

1
2
008125
1
008126
Removing screw strip
To remove the screw strip, just pull it out in the direction
of the arrow. If you depress the reverse button, you can
pull out the screw strip in the reverse direction of the
arrow.
008127
1
008128
1. Feeder box
2. Screw strip
3. Screw guide
3
1. Driving position
1. Reverse button
Folding screw guide
008252
Screw guide is foldable. Folding the screw guide allows
space used for storage to be minimal.
Extension handle (optional accessory)
008129
Use of extension handle allows you to drive screws into
floors while standing.

OPERATION

Driving operation
008130
Switch on the tool by pressing the switch trigger and at
the same time pushing the lock button. Hold the tool
squarely against the workpiece and apply forward
pressure to the tool. The screw will be automatically
carried to the driving position and driven into the
workpiece.
CAUTION:
Always hold the tool squarely against the driving
•
surface. Holding it at an angle may damage the
screw heads and cause wear on the bit. This may
also lead to poor fastening.
Always keep the tool firmly against the driving
•
surface until the driving is over. Failure to do so
may cause insufficient fastening of screws.
6
1. Extension
handle
1