INTRODUCTION
PURPOSE
This manual describes the hardware installation and the programming procedure for the Integrated Service
Digital Network (ISDN) on the NEAX 2000 IPS System.
OUTLINE OF THIS MANUAL
This manual consists of five chapters. The following paragraphs summarize Chapters 1 through 5.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5
GENERAL INFORMATION
This chapter explains the ISDN system outline, the equipment name and function,
system specifications, capacity and conditions.
INSTALLATION
This chapter explains the hardware installation procedure to provide ISDN interface
to the PBX.
SYSTEM DATA PROGRAMMING
This chapter explains the programming procedure to provide the ISDN feature to
the PBX.
CIRCUIT CARD INFORMATION
This chapter explains the mounting location, the meaning of lamp indications, and
the switch settings of each ISDN circuit card.
OPERATION TEST
This chapter explains the operation test to be performed after you completed the
installation of ISDN. For fault diagnosis by MAT or CAT, refer to the Maintenance
Manual.
PURPOSE/OUTLINE OF THIS MANUAL
– 1 –
INTRODUCTION
NWA-008852-001 Rev.5.0
98ch0001.fm
JANUARY/31/2006