Kenmore 795.6827 Series Use & Care Manual page 18

Remove Hinge Pin Insert on the right side of the
door and reinstall on left side of door.
Fig. 60
Hinge Pin
• Turn refrigerator door upside down on a non-scratch
surface.
• Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Fig. 61
Hinge Pin
Hinge Pin W
• Remove Washer and set aside.
• Using a 1/4" socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket.
Pin
Carefully lift up the freezer door. Remove and place
it on a non scratching surface.
Turn freezer door upside down.
With door upside down, loosen the 2 screws and
remove the Door Closer/Stop.
Fig. 65
Door Closer/Stop
• Remove the screw on the opposite side of the door.
This screw is no longer necessary and can be
discarted.
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig.
Pin Insert
Hinge Pin
• Pry off cover on top of refrigerator on left side to
uncover screw holes and place it on the right side.
Fi'_ 63 _ Cover
u.u_ (on top of
refrigerator)
I 1
18
• Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Fig. 66
I
Hinge Pin
Hinge Pin
Insert
• Remove the screw on the opposite side of the door.
This screw is no longer necessary and can be
discarded.
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig. 67
Pin Insert I
Hinge Pin
Insert Bracket