Kenmore 795.6827 Series Use & Care Manual page 15

• Install the handle mounting fasteners
on the right side. Turn handle upside down.
HOW TO REVERSE DOOR HANDLE
NOTE: Handle appearance may vary from illustrations
on this page.
• Loosen the 2 set screws with a 3/32" hex
wrench and remove the handle.
F
Loosen the handle mounting fasteners
with a 1/4" hex wrench.
Fig. 41
Handle MounUng
Fig. 44 Fastener
Install the handle by adjusting handle
footprints to fit mounting fasteners. Tighten
the set screws with a 3/32" hex wrench.
• Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
• Install the plug buttons on the left side.
Plug
Fig. 43
15