Buffalo TeraStation User Manual page 7

8
Notes:
• By default, the TeraStation will attempt to use an NTP server to set the time.
• NTP may not be usable in some network environments.
• Please read the terms of use for Internet Multifeed Co. at www.jst.mfeed.ad.jp. Internet Multifeed Co. is the group that
manages this NTP Server. Internet Multifeed Co. is not responsible for any loss or damages caused by this service.
• Buffalo Technology is not responsible for any loss or damage caused by using of this service, stopping the service, or
missing service.
• If your TeraStation fails to automatically obtain the time from an NTP Server, verify the TeraStation's DNS server
address settings. You must set a primary DNS server address to specify an NTP server by host name. Otherwise you
will have to specify the DNS server by IP address. You can change the DNS server settings at [Network] - [Settings] - [IP
Address Settings] in the Web Admin interface.
9
The following settings changes are recommended.
Change your administration password
We recommend that you change the default password to a secure password.
1 In the Web Admin interface, navigate to [Users/Groups] - [Local Users] .
2 Select [admin] from the user list and click [Edit User].
3 Enter a new password (twice).
-1
Click [Save].
-2
Your administrator password is now changed.
Configure RAID Scanning
RAID Scanning checks your RAID arrays for problems and automatically fixes any errors it can. To configure:
1 In the Web Admin interface, navigate to [System] - [Storage] - [RAID Scanning] - [Modify Settings].
2 Click [Enable] for [RAID Scanning].
3 Select the schedule to perform RAID Scanning.
Note: With [Immediate] checked, RAID Scanning will run immediately.
4 Click [Save].
You have completed the settings for RAID Scanning.
1 To manually configure the date and time, select [Manual] and
adjust [Date], [Time], and [Time Zone].
Note:
Click [Use Local Date/Time] to use your computer's time (or Time
Zone) for the TeraStation's time.
2 Click [Save].
6