Clock Functions; Using The Accessories - Zanussi ZOD35511W User Manual

Clock functions

Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions Duration
and End
set the time for how long the
appliance should operate and when
the appliance should deactivate.
This lets you activate the appliance
with a delay in time. First set the
Duration
Setting the clock functions
For Duration and End
function and temperature of cooking. This is not
necessary for the Minute Minder
1. Press again and again until the indicator
for the necessary clock function starts to
flash.
2. Press or to set the time for the
necessary clock function.
The clock function operates. The display shows
the indicator for the clock function you set.

Using the accessories

WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
8
To set, change or check the time of day.
To set countdown time. This function has no effect on the operation of
the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
at the same time to
and then the End
, set an oven
.
Application
For the Minute Minder function the
display shows the time left.
3. When the time ends the indicator of the
clock function flashes and an acoustic
signal sounds. Press a button to stop the
signal.
4. Turn the knob for the oven functions and
the knob for the temperature to the off
.
position.
With the Duration
functions, the appliance deactivates
automatically. The functions work
only for the main oven.
Cancelling the clock functions
1. Press the
necessary function indicator flashes.
2. Press and hold
The clock function goes out after some
seconds.
Deep pan:
and End
again and again until the
.
www.zanussi.com