7. MENU ( "SET" ) MODE
The HX300's Menu Mode allows a number of the HX300 operating param-
eters to be custom-configured.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by press and holding the
2. Hold down the
er while still holding down the
3. After "
" icon appears on the display let go of both
keys.
4. The
key when pressed scrolls through each menu
item:
LP - Lamp mode,
bP - key beep,
SC - Scan Mode,
dt - Dual watch or Tri-Watch mode,
FL - Water Enabled Strobe Menu,
AL - Weather alert
5. Press the
the selected menu item.
6. Press the
7. After completing your adjustment, turn the transceiver off and on by
press and holding the
LP ( LAMP MODE )
Function: Selects the Lamp illumination method for the
LCD/Keypad.
Available Values: on / ky / oF
Default: kEY
on: Illuminates the LCD/Keypad continuously.
ky: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oF: Turns off the backlight for the LCD and keys.
bP ( BEEP )
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oF
Default: HI
Page 32
key, and then turn on the transceiv-
or
key will change the selection of
key to save the menu selection.
key.
key.
key.
HX300