Advertisement
Date: 12/28/07
Parts& RepaLr S ervices
SF22-804
Page
5 of 6
11. Use the wire nut connector
provided to
connect the power wire that was attached to
the 170 ° thermostat
to the #1 wire from the
"C" terminal of the new switch.
12. Install the #2 (318052585
- Red) wire
from the "NC" terminal of the new switch to
the open terminal of the 170 ° thermostat
that
the power wire previously
attached to.
new switch
13. Disconnect
the wire from the fan to
the 170 ° thermostat.
Connect
this
wire to the piggyback
terminal
on the
#3 (318052585
- Red) wire. Connect
these two wires onto the open
terminal of the 170 ° thermostat.
14. Connect the other end of the red #3
wire to the resistor. Connect the #4
(318052586-Brown)
wire to one
terminal
of the 120 ° thermostat.
Connect
the other end to the
resistor.
Confidential
Information
-For
Internal Use Only
DEPARTMENT
702HSX - Leo Steinys
DEPARTMENT
702PSO
- Bob Vondale
Advertisement
