Install Remote Control Batteries; Connect Power - Philips AZ3856 User Manual

Install remote control batteries

Caution
•
Risk of explosion! Keep batteries away from heat, sunshine or
fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different brands or
types of batteries.
•
Risk of product damage! When the remote control is not used
for long periods, remove the batteries.
For first-time use:
1 Remove the protective tab to activate the remote control batteries.
To replace the remote control batteries:
1 Open the battery compartment.
2 Insert 1 CR2025 batterie with correct polarity (+/-) as indicated.
3 Close the battery compartment. (See 4)

Connect power

Warning
•
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the back or the underside of the
apparatus.
•
Risk of electric shock! When you disconnect the AC power, always pull
the plug from the socket. Never pull the cord.
Note
•
Install the apparatus near the power supply socket and where
the power plug can be easily reached.